2019300 THEBEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Item no.: 2019300 Subject to technical changes and misprints additional information at: www.theben.de/product/2019300 The load data are determined with exemplary selected illuminants and are therefore typical data due to the large number of available products. Presence and motion detectors Ceiling installation indoor
Description
- Passive infra-red presence detector KNX for flush-mounted ceiling installation - Rectangular detection area 360°, 30 x 4,5 m, (135 m2) at mounting height 3 m, for corridors and storage areas, with 2 individually connectable and disconnectable detection zones - 2 channels light and 2 channels presence - 2 channel light C1, C2 with 2 light measurements - 2 presence channels can be parametrized individually - Adaptable 2 channel light measurement - Function aura effect, switches on the lighting group when there is a person in its detection area and dims the adjacent lighting groups - Function chaser light, recognises the direction of movement of the people in the room and "predictively" switches on the adjacent lighting group - Function walking direction recognition - Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ ESL) and halogen/incandescent lamps - Can be used as fully or semi-automatic, switchable - Switch or constant light control mode with stand-by function - Dimmable lighting in switch mode with stand-by function - Brightness switching value or set point value can be set in lux using parameters, on the device itself or via remote control - Teaching in of the brightness switching value or the set point value - Room correction factor setting for brightness measurement calibration - Light time delay can be set using parameters, on the device itself or via remote control - Switch on delay and time delay for presence can be set - Detection sensitivity can be set - Reduced time delay in the event of a shorter stay in the room (short presence) - Scenario functions - Test mode for checking function and detection range - Sensitivity adjustable - Detection area can be limited using cover clip - Manual override using telegram or remote control - Parallel switching of several detectors in Master/Slave or Master/ Master possible - Ceiling installation in flush-mounted socket - Ceiling installation also possible with surface-mounted frame - User remote control and management-remote control (optional) 22/11/2024 Page 1 of 4
Item no.: 2019300 Subject to technical changes and misprints additional information at: www.theben.de/product/2019300 The load data are determined with exemplary selected illuminants and are therefore typical data due to the large number of available products. Technical data thePassa P360 KNX UP WH Installation height 2 - 6 m Maximum height 15 m Minimum height 1.7 m Measuring range brightness 10 - 3000 lx Detection angle 360° Type of connection KNX bus terminal Installation type Ceiling installation Light switch-off delay 30 s - 60 min thePassa P360 KNX UP WH Lamp types Energy saving lamps, fluorescent lamps, Incandescent/halogen lamps, LEDs Light measurement Mixed light measurement Presence switch-off delay 10 s - 120 min Switch-on delay presence 10 s - 30 min / inactive Ambient temperature -15°C ... 50°C Detection range 150 m² (30,0 x 5 m) Colour White Type of protection IP 54 (when fitted) Detection range for planning applications at a temperature of 21 °C Mounting height (A) Diagonally (t) Head on to (R) 2 m 56 m² | 16 m x 3.5 m 56 m² | 16 m x 3.5 m 2.5 m 88 m² | 22 m x 4 m 72 m² | 18 m x 4 m 3 m 135 m² | 30 m x 4.5 m 90 m² | 20 m x 4.5 m 3.5 m 150 m² | 30 m x 5 m 100 m² | 20 m x 5 m 4 m 150 m² | 30 m x 5 m 100 m² | 20 m x 5 m 4.5 m 150 m² | 30 m x 5 m 100 m² | 20 m x 5 m 5 m 150 m² | 30 m x 5 m 100 m² | 20 m x 5 m 5.5 m 150 m² | 30 m x 5 m 100 m² | 20 m x 5 m 6 m 150 m² | 30 m x 5 m 100 m² | 20 m x 5 m 22/11/2024 Page 2 of 4
Item no.: 2019300 Subject to technical changes and misprints additional information at: www.theben.de/product/2019300 The load data are determined with exemplary selected illuminants and are therefore typical data due to the large number of available products. Detection range according to Sensnorm IEC 63180 Mounting height (A) Diagonally (T) Head on to (R) 2.5 m 215 m² | 43 m x 5 m 62 m² | 14.8 m x 4.2 m 6 m 550 m² | 50 m x 11 m 495 m² | 45 m x 11 m 15 m 800 m² | 40 m x 20 m 600 m² | 30 m x 20 m Scale drawings Accessories theSenda P Item no.: 9070910 theSenda S Item no.: 9070911 Ceiling installation box 73A Item no.: 9070917 Surface frame 110A WH Item no.: 9070912 22/11/2024 Page 3 of 4
Item no.: 2019300 Subject to technical changes and misprints additional information at: www.theben.de/product/2019300 The load data are determined with exemplary selected illuminants and are therefore typical data due to the large number of available products. Accessories Masking clip Item no.: 9070921 QuickSafe Item no.: 9070531 theSenda B Item no.: 9070985 Cover 110 GR Item no.: 9070591 Ceiling installation box 68A Item no.: 9070992 Surface frame 110A BK Item no.: 9070600 Cover 110 BK Item no.: 9070851 22/11/2024 Page 4 of 4