1-200871-0 TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Catalog 82003 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 06-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets are Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 NOTE: All part numbers are RoHS Compliant Fastening Hardware Male Female Male Female Long-Long Long Male Female Male Female Short Short-Short Roll Pin 3.285 [83.44] (Assembled) 3.305 [83.95] (Assembled) 2.285 [58.04] (Assembled) 2.305 [58.55] (Assembled) 1.180 [29.97] (Assembled*) 1.200 [30.48] (Assembled*) AMP Assembly Tool Part No. 91016-2 (for Roll Pins) Nut Driver Part No. 811262-1 (4-40) Turnable Jackscrews * Assembled dimension includes metal thickness of Pin Hood or Strain Relief Clamp. Remove washer when both Pin Hood and Strain Relief Clamp are used. Roll PinRoll Pin Roll Pin Roll Pin Roll Pin Roll Pin Roll Pin Flat Washer Flat Washer 1.670 [42.42] (Assembled) 1.648 [41.84] (Assembled) Turnable Jackscrews Jackscrew Part No. Connectors Used on (No. of Positions) 6-32 [M3.5 x 0.6] 6-32 [M3.5 x 0.6] Special Application Style Double Lead Single Lead Standard Posted High High Thread Thread Current Mixed Voltage Long-Long Male1 201911-1 207234-1 50 (90° Long-Long shield only), — 12 42 28 Female1 201910-1 207235-1 75 and 104 Long Male 1-200871-0 201413-4 20, 26, 34, 41 , 20, 26, 34, 41, 15, 16 20 Long and 50 and 50 12 and 42 and 28 Female 1-200867-1 201414-4 Short Male 200868-1 201087-1 6, 14, 20, 26, 6, 14, 20, 26, 34, 15, 16 20 Short 34, 41, 50, 34, 41, 50, 12 and 42 and 28 Female 200870-1 201088-1 75 and 104 75 and 104 Short-Short Male 201388-1 201827-1 6, 14, 20, 26, 6, 14, 20, 26, 34, 15, 16 20 Short-Short 34, 41, 50, 34, 41, 50, 12 and 42 and 28 Female 201389-1 201828-1 75 and 104 75 and 104 1Long-Long Turnable Jackscrews are used only with Two-Piece Shields on the connector sizes listed. Notes: 1. Turnable Jackscrews mate with any Fixed Jackscrew listed below having the same thread size. 2. Special Turnable Jackscrews for use in connector housings to mate with Grounding Blocks are presented on page 77. 3. Single-lead versions are designed to mate with competitive Jackscrews. Roll pins for turnable jackscrews, Long-Long, Long, Short Part No. 201501-1, Short-Short Part No. 201501-2. Jackscrews Material and Finish Turnable Jackscrew Body - Die cast zinc, chromate conversion coating Turnable Jackscrew Tip - Stainless steel Roll Pin - Stainless steel For Fixed Jackscrews Lockwasher - Steel Hex Nut - Steel, zinc plated Jackscrews are used as an aid in mating and unmating connectors and for holding mated connectors together, mostly larger sizes (34-posi- tion and up). They can also be used for polarization. Turnable jackscrews are free to rotate in a connector hous- ing and are always used opposite mating fixed jack- screws. Where provided, roll pins are used to hold a male or female tip onto the turn- able jackscrew body. AMP Assembly Tool No. 91016-2 (shown below) is available for properly assem- bling the turnable jackscrews on a connector housing. Fixed jackscrews can be readily assembled to a connector housing with the Nut Driver Tool (also shown below). Hardware