2016L LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

Applications

  • RoHS compliant, lead-free and halogen-free
  • Fast response to fault currents
  • High voltage
  • Low-profile
  • IEEE 1394 port protection
  • Powered ethernet port protection (IEEE 802.3 af)
  • Automotive electronic control module protection
  • Low voltage telecom equipment protection Agency Approvals 2016L Series RoHS WARNING
  • Users shall independently assess the suitability of these devices for each of their applications
  • Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire
  • These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such conditions are expected to be repetitive or prolonged in duration
  • Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices
  • These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses
  • Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device. AGENCY AGENCY FILE NUMBER E183209 R50119118

© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/22/16 Surface Mount > 2016L Series Ambient Operation Temperature -40°C -20°C 0°C 20°C 40°C 50°C 60°C 70°C 85°C Part Number Hold Current (A) T emperature Rerating T emperature Rerating CurveAverage Time Current Curves The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. Note: Typical Temperature rerating curve, refer to table for derating data -40 -30 -20 -100 10 20 30 40 50 60 70 80 85 10% 30% 50% 70% 90% 110% 130% 150% 170% Temperature (°C) Percentage of Rated Current 0.01 0.1 100 0.1 11 0 Time in Seconds Current in Amperes 0.30A 0.50A 0.75A/60 1.00A 1.00A/33 1.50A 2.00A 1.50A/33 2.60A/24 3.00A/1 5.00A Additional Information Datasheet SamplesResources Samples

© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/22/16 Surface Mount > 2016L Series Environmental Specifications Soldering Parameters Operating/Storage T emperature -40°C to +85°C Maximum Device Surface T emperature in T ripped State 125°C Passive Aging +85°C, 1000 hours -/+5% typical resistance change Humidity Aging +85°C, 85%,R.H.,1000 hours -/+5% typical resistance change Thermal Shock MIL–STD–202, Method 107 +85°C/-40°C 20 times -30% typical resistance change Solvent Resistance MIL–STD–202, Method 215 No change Vibration MIL–STD–883, Method 2007 , Condition A No change Moisture Sensitivity Level Level 1, J–STD–020 Physical Specifications T erminal Material Solder-Plated Copper (Solder Material: Matte Tin(Sn)) Lead Solderability Meets EIA Specification RS186-9E, ANSI/ J-STD-002 Category 3. Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone tL to tP Profile Feature Pb-Free Assembly Average Ramp-Up Rate (TS(max) to TP) 3°C/second max Pre Heat: Temperature Min (Ts(min)) 150°C Temperature Max (Ts(max)) 200°C Time (Min to Max) (ts) 60 – 180 secs Time Maintained Above: Temperature (TL) 217°C Temperature (tL) 60 – 150 seconds Peak / Classification Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (t p) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. -- All temperature refer to topside of the package, measured on the package body surface -- If reflow temperature exceeds the recommended profile, devices may not meet the performance requirements -- Recommended reflow methods: IR, vapor phase oven, hot air oven, N2 environment for lead -- Recommended maximum paste thickness is 0.25mm (0.010 inch) -- Devices can be cleaned using standard industry methods and solvents -- Devices can be reworked using the standard industry practices

© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/22/16 Surface Mount > 2016L Series Part Ordering Number System PACKAGING STYLE L: LITTELFUSE SURFACE MOUNT PPTC QUANTITY CODE: D=1500 M=1000 P=2000 R: Tape & Reel

2016 L xxx /xx D R

DEVICE SIZE CODE (0.20 x 0.16 inch) I HOLD HOLD CURRENT CODE (Refer to Electrical Characteristics Table) SPECIAL VOLTAGE RATING ITEM (Not applicable to all parts. Refer to Electrical Characteristics Table for additional information) -A: Automotive grade Blank: Standard version - A Packaging Dimensions (mm) C Top View Pad Layout Side View Bottom View 4.60 mm (.181”) 3.40 mm (.133”) 1.50 mm (.059”) D MARKING CODE VARIES WITH AMPERA GE AND VOLTAGE RATING SEE ELECTRICAL CHARA CTERISTICS CHAR T SHOWN ARE: - 1.1A/15V RATING (LEFT) - 1.1A/33V RA TING (RIGH T) E A B100 100 100 -33 Part Number A B C D E Inches mm Inches mm Inches mm Inches mm Inches mm Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max 2016L030 4.43 0.03 0.05 0.75 1 .25 2016L050 0.05 0.08 1 .20 2.00 2016L075/60 0.05 0.08 1 .20 2.00 2016L100 0.02 0.03 0.50 0.75 2016L100/33 0.03 0.05 0.75 1 .25 2016L150 0.03 0.06 0.75 1 .55 2016L260/24 2016L500 Part Number Ordering Number Halogen Free I hold (A) I hold Code Voltage Option Packaging Option Quantity Quantity & Packaging Codes 2016L030 2016L030DR Ye s 0.30 030 Tape and Reel 1500 DR 2016L050 2016L050MR Ye s 0.55 050 Tape and Reel 1000 MR 2016L075/060 2016L075/60MR Ye s 0.75 075 /60 Tape and Reel 1000 MR 2016L100 2016L100PR Ye s 1. 10 110 Tape and Reel 2000 PR 2016L100/33 2016L100/33DR Ye s 1. 10 110 /33 Tape and Reel 1500 DR 2016L150 2016L150DR Ye s 1 .50 150 Tape and Reel 1500 DR 2016L150/33 2016L150/33DR Ye s 1 .50 150 /33 Tape and Reel 1,500 DR 2016L200 2016L200PR Ye s 2.00 200 Tape and Reel 2000 PR 2016L260/24 2016L260/24DR Ye s 2.60 260 /24 Tape and Reel 1,500 DR 2016L300/16 2016L300/16DR Ye s 3.00 300 /16 Tape and Reel 1,500 DR 2016L500 2016L500DR Ye s 5.00 500 /6 Tape and Reel 1,500 DR

© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/22/16 Surface Mount > 2016L Series TAPE SPECIFICATIONS: EIA-481-1 (mm) REEL DIMENSIONS: EIA-481-1 (mm)2016L100 2016L200 2016L030 2016L100/33 2016L150 2016L150/33 2016L260/24 2016L300/16 2016L500 2016L050 2016L075/60 D1 1 .50 (MIN) 1 .50 (MIN) 1 .50 (MIN) Leader Min. 390 390 390 Trailer Min. 160 160 160 T ape and Reel Specifications T ape and Reel Diagram W CD H K0 B0D1 T F W E1P2 P0P1