198200005X500 CML | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
2 — a C stripped and tinned | black heat isolated wire 0.22mm? (7x0.2) shink tubing _red wire = anode / black wire = cathode O14 Alle Mae in mm / All dimensions are in mm Elektrische und optische Daten sind bei einer Umgebungstemperatur von 25°C gemessen. Electrical and optical data are measured at an ambient temperature of 25°C. Bestell-Nr. Farbe Spannung Strom Lichtstarke Part No. Colour Voltage Current Lumi. Intensity "982000050500 | om 2ovpe “edmed (20m) tes2000061600 Payne “6mod (2omA) t982000082500 aayee “6mod (2omA) Lichtstarkedaten der verwendeten Leuchtdioden bei DC / Luminous intensity data of the used LEDs at DC Lagertemperatur / Storage temperature -25°C - +80°C Umgebungstemperatur / Ambient temperature -20°C - +60°C ‘Spannungstoleranz / Voltage tolerance +10% Ohne Vorwiderstand / Without resistor Allgemeiner Hinweis: Bedingt durch die Fertigungstoleranzen der Leuchtdioden kann es zu geringfiigigen Schwankungen der Farbe (Farbtemperatur) kommen. Es kann deshalb nicht ausgeschlossen werden, dal die Farben der Leuchtdioden eines Fertigungsloses unterschiedlich wahrgenommen werden. General: Due to production tolerances, colour temperature variations may be detected within individual consignments. Der Kunststoff (Polycarbonat) ist nur bedingt chemikalienbesténdig / The plastic (polycarbonate) is limited resistant against chemicals. Die Auswahl und der technisch richtige Einbau unserer Produkte, nach den entsprechenden Vorschriften (z.B. VDE 0100 und 0160), obliegen dem Anwender / The selection and technical correct installation of our products, conforming for the relevant standards (e.g. VDE 0100 and VDE 0160) is incumbent on the user. Schwarzer Kunststoffreflektor - Schnellbefestigung in eine Bohrung von @ 14 + 0.2mm in Montageplatten mit einer Starke von 1 bis 3mm / Black plastic bezel - quick and economical snap-in mounting 14 + 0.2mm diameter holes into mounting plates with a thickness of 1 up to 3mm. a CML Technologies GmbH & Co. KG H ( } | ‘echnologies Gmi 0. . os M D-67098 Bad Diirkheim LED Indicator 14mm INNOVATIVE TECHNOLOGIES _ (formerly EBT Optronic) Standard Bezel WHERE nNOvATION COMES TO LIGHT