408-10207 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
/C0052/C0048/C0056/C0045/C0049/C0048/C0050/C0048/C0055/C0080/C0082/C0079/C0045/C0067/C0082/C0073/C0077/C0080/C0069/C0082/C0073/C0073/C0073/C0072/C0097/C0110/C0100/C0084/C0111/C0111/C0108/C0065/C0115/C0115/C0101/C0109/C0098/C0108/C0121/C0049/C0057/C0055/C0054/C0052/C0052/C0052/C0045/C0049/C0119/C0105/C0116/C0104/C0068/C0105/C0101/C0065/C0115/C0115/C0101/C0109/C0098/C0108/C0121/C0049/C0057/C0055/C0054/C0052/C0052/C0052/C0045/C0050 /C0082/C0101/C0118/C0065/C0050/C0111/C0102 /C0053 /C0084/C0121/C0099/C0111 /C0069/C0108/C0101/C0099/C0116/C0114/C0111/C0110/C0105/C0099/C0115 /C0067/C0111/C0114/C0112/C0111/C0114/C0097/C0116/C0105/C0111/C0110 Figure 2 /C0076/C0111/C0099/C0097/C0116/C0111/C0114 /C0065/C0115/C0115/C0101/C0109/C0098/C0108/C0121 /C0084 /C0111/C0111/C0108/C0070/C0114/C0097/C0109/C0101 /C0068/C0105/C0101 /C0082/C0101/C0116/C0097/C0105/C0110/C0105/C0110/C0103 /C0080/C0105/C0110/C0115 /C0040/C0052 /C0080/C0108/C0097/C0099/C0101/C0115/C0041 /C0076/C0111/C0110/C0103 /C0068/C0105/C0101 /C0082/C0101/C0116/C0097/C0105/C0110/C0105/C0110/C0103 /C0083/C0099/C0114/C0101/C0119 /C0067/C0104/C0097/C0109/C0102/C0101/C0114/C0101/C0100 /C0069/C0100/C0103/C0101 /C0073/C0110/C0115/C0117/C0108/C0097/C0116/C0105/C0111/C0110 /C0065/C0110/C0118/C0105/C0108 /C0087/C0105/C0114/C0101 /C0065/C0110/C0118/C0105/C0108 /C0087/C0105/C0114/C0101 /C0067/C0114/C0105/C0109/C0112/C0101/C0114 /C0076/C0111/C0099/C0097/C0116/C0111/C0114 /C0073/C0110/C0115/C0117/C0108/C0097/C0116/C0105/C0111/C0110 /C0067/C0114/C0105/C0109/C0112/C0101/C0114 /C0080/C0105/C0110 /C0067/C0111/C0110/C0116/C0097/C0099/C0116 /C0083/C0117/C0112/C0112/C0111/C0114/C0116 /C0068 /C0083/C0099/C0114/C0101/C0119 /C0076/C0111/C0099/C0107 /C0078/C0117/C0116 /C0067/C0104/C0097/C0109/C0102/C0101/C0114/C0101/C0100 /C0069/C0100/C0103/C0101 /C0067/C0104/C0097/C0109/C0102/C0101/C0114/C0101/C0100 /C0069/C0100/C0103/C0101 /C0083/C0104/C0111/C0114/C0116 /C0068/C0105/C0101 /C0082/C0101/C0116/C0097/C0105/C0110/C0105/C0110/C0103 /C0083/C0099/C0114/C0101/C0119 /C0068/C0083/C0117/C0112/C0112/C0108/C0105/C0101/C0100 /C0073/C0110/C0115/C0116/C0097/C0108/C0108/C0101/C0100 /C0111/C0110/C0116/C0111 /C0076/C0111/C0099/C0097/C0116/C0111/C0114 /C0065/C0115/C0115/C0101/C0109/C0098/C0108/C0121/C0068/C0068/C0083/C0117/C0112/C0112/C0108/C0105/C0101/C0100 /C0083/C0101/C0112/C0097/C0114/C0097/C0116/C0101/C0108/C0121 /C0097/C0110/C0100 /C0077/C0117/C0115/C0116 /C0066/C0101 /C0073/C0110/C0115/C0116/C0097/C0108/C0108/C0101/C0100 /C0111/C0110/C0116/C0111 /C0076/C0111/C0099/C0097/C0116/C0111/C0114 /C0065/C0115/C0115/C0101/C0109/C0098/C0108/C0121 /C0083/C0111/C0099/C0107/C0101/C0116 /C0067/C0111/C0110/C0116/C0097/C0099/C0116 /C0083/C0117/C0112/C0112/C0111/C0114/C0116/C0068/C0068 The die assembly consists of a wire anvil, an insulation anvil, a wire crimper, and an insulation crimper. When closed, the dies form a crimping chamber. Die retaining pins and die retaining screws are used to secure the dies in the tool frame. A locator assembly is included with the die assembly and must be attached to the outside of the tool frame. The locator assembly features a locator, spring retainer, and pin contact support. A lock nut is used to hold the locator assembly in place. A socket contact support (supplied separately) must be installed onto the locator assembly. /C0051/C0046 /C0073/C0078/C0083/C0084/C0065/C0076/C0076/C0065/C0084/C0073/C0079/C0078/C0065/C0078/C0068/C0082/C0069/C0077/C0079/C0086/C0065/C0076/C0079/C0070 /C0068/C0073/C0069/C0065/C0083/C0083/C0069/C0077/C0066/C0076/C0089/C0065/C0078/C0068/C0076/C0079/C0067/C0065/C0084/C0079/C0082/C0065/C0083/C0083/C0069/C0077/C0066/C0076/C0089/C0040/C0070/C0105/C0103/C0117/C0114/C0101 /C0050/C0041 1. Close the tool handles until the ratchet releases, then allow the handles to open fully. /C0084/C0104/C0101 /C0114/C0097/C0116/C0099/C0104/C0101/C0116 /C0104/C0097/C0115 /C0100/C0101/C0116/C0101/C0110/C0116/C0115 /C0116/C0104/C0097/C0116 /C0099/C0114/C0101/C0097/C0116/C0101 /C0097/C0117/C0100/C0105/C0098/C0108/C0101 /C0099/C0108/C0105/C0099/C0107/C0115 /C0097/C0115 /C0116/C0104/C0101 /C0116/C0111/C0111/C0108 /C0104/C0097/C0110/C0100/C0108/C0101/C0115 /C0097/C0114/C0101 /C0099/C0108/C0111/C0115/C0101/C0100/C0046 2. Remove the two die retaining screws from the tool jaws. 3. Place the wire anvil and insulation anvil in the moving jaw so that the chamfered edges and marked surfaces face outward. 4. Insert the two die retaining pins through the outer–most holes. 5. Insert the short die retaining screw through the hole of the moving jaw and hole of both anvils, and tighten the screw just enough to hold the anvils in place. DO NOT completely tighten the screw. 6. Place the wire crimper and insulation crimper in the stationary jaw so that the chamfered corners and marked surfaces face outward. 7. Insert the two remaining die retaining pins through the outer–most holes. 8. Insert the long die retaining screw through the hole of the stationary jaw and hole of both crimpers, and tighten the screw just enough to hold the crimpers in place. DO NOT completely tighten the screw. /C0078/C0079/C0084/C0069 /C0105
/C0052/C0048/C0056/C0045/C0049/C0048/C0050/C0048/C0055/C0080/C0082/C0079/C0045/C0067/C0082/C0073/C0077/C0080/C0069/C0082 /C0073/C0073/C0073 /C0072/C0097/C0110/C0100 /C0084/C0111/C0111/C0108/C0065/C0115/C0115/C0101/C0109/C0098/C0108/C0121/C0049/C0057/C0055/C0054/C0052/C0052/C0052/C0045/C0049/C0119/C0105/C0116/C0104/C0068/C0105/C0101/C0065/C0115/C0115/C0101/C0109/C0098/C0108/C0121/C0049/C0057/C0055/C0054/C0052/C0052/C0052/C0045/C0050 /C0051/C0111/C0102 /C0053/C0082/C0101/C0118/C0065 /C0084/C0121/C0099/C0111 /C0069/C0108/C0101/C0099/C0116/C0114/C0111/C0110/C0105/C0099/C0115 /C0067/C0111/C0114/C0112/C0111/C0114/C0097/C0116/C0105/C0111/C0110 9. Carefully close the tool handles, making sure that the anvils and crimpers align properly. Continue closing the tool handles until the ratchet engages sufficiently to hold the anvils and crimpers in place, then tighten both die retaining screws. 10. Remove the screw that secures the pin contact support onto the locator assembly. With the pin socket support against the locator assembly, position the socket contact support against the pin socket support. Re–insert the screw, and thread the screw just enough the hold the contact supports in place while still allowing them to slide up and down. 11. Place the hole of the locator assembly over the end of the long screw and against the side of the tool jaw, then place the lock nut onto the end of the long screw. Tighten the lock nut just enough to hold the locator assembly in place while still allowing the locator to slide up and down. 12. Adjust each contact support until they meet the dimensions given in Figure 3. Tighten the screw, and close the tool handles until the ratchet releases. 13. To disassemble, close the tool handles until the ratchet releases, remove the lock nut, the locator assembly (with contact supports), and the two die retaining pins, then slide the dies out of the tool jaws. /C0083/C0099/C0114/C0101/C0119/C0076/C0111/C0099/C0097/C0116/C0111/C0114 /C0076/C0111/C0099/C0107 /C0078/C0117/C0116 /C0076/C0111/C0099/C0097/C0116/C0111/C0114 /C0065/C0115/C0115/C0101/C0109/C0098/C0108/C0121 /C0080/C0105/C0110 /C0067/C0111/C0110/C0116/C0097/C0099/C0116 /C0083/C0117/C0112/C0112/C0111/C0114/C0116 /C0065/C0066 /C0083/C0116/C0097/C0116/C0105/C0111/C0110/C0097/C0114/C0121 /C0074/C0097/C0119 /C0083/C0111/C0099/C0107/C0101/C0116 /C0067/C0111/C0110/C0116/C0097/C0099/C0116 /C0083/C0117/C0112/C0112/C0111/C0114/C0116 /C0068/C0073/C0077/C0069/C0078/C0083/C0073/C0079/C0078 /C0065/C0068/C0073/C0077/C0069/C0078/C0083/C0073/C0079/C0078 /C0066 /C0051/C0046/C0056/C0049 /C0091/C0046/C0049/C0053/C0048/C0093 /C0066/C0111/C0116/C0116/C0111/C0109 /C0111/C0102 /C0076/C0111/C0099/C0097/C0116/C0111/C0114 /C0067/C0111/C0118/C0101/C0114 /C0116/C0111 /C0066/C0111/C0116/C0116/C0111/C0109 /C0111/C0102 /C0080/C0105/C0110 /C0067/C0111/C0110/C0116/C0097/C0099/C0116 /C0083/C0117/C0112/C0112/C0111/C0114/C0116 /C0052/C0046/C0050/C0057 /C0091/C0046/C0049/C0054/C0057/C0093 /C0066/C0111/C0116/C0116/C0111/C0109 /C0111/C0102 /C0076/C0111/C0099/C0097/C0116/C0111/C0114 /C0067/C0111/C0118/C0101/C0114 /C0116/C0111 /C0066/C0111/C0116/C0116/C0111/C0109 /C0111/C0102 /C0083/C0111/C0099/C0107/C0101/C0116 /C0067/C0111/C0110/C0116/C0097/C0099/C0116 /C0083/C0117/C0112/C0112/C0111/C0114/C0116 Figure 3 /C0052/C0046 /C0067/C0082/C0073/C0077/C0080/C0073/C0078/C0071 /C0080/C0082/C0079/C0067/C0069/C0068/C0085/C0082/C0069 /C0084/C0104/C0105/C0115 /C0116/C0111/C0111/C0108 /C0105/C0115 /C0112/C0114/C0111/C0118/C0105/C0100/C0101/C0100 /C0119/C0105/C0116/C0104 /C0097 /C0099/C0114/C0105/C0109/C0112 /C0097/C0100/C0106/C0117/C0115/C0116/C0109/C0101/C0110/C0116 /C0102/C0101/C0097/C0116/C0117/C0114/C0101/C0046 /C0073/C0110/C0105/C0116/C0105/C0097/C0108/C0108/C0121 /C0044 /C0116/C0104/C0101 /C0099/C0114/C0105/C0109/C0112 /C0104/C0101/C0105/C0103/C0104/C0116 /C0111/C0102 /C0097 /C0115/C0097/C0109/C0112/C0108/C0101 /C0099/C0111/C0110/C0116/C0097/C0099/C0116 /C0115/C0104/C0111/C0117/C0108/C0100 /C0098/C0101 /C0118/C0101/C0114/C0105/C0102/C0105/C0101/C0100 /C0105/C0110 /C0097/C0099/C0099/C0111/C0114/C0100/C0097/C0110/C0099/C0101 /C0119/C0105/C0116/C0104 /C0083/C0101/C0099/C0116/C0105/C0111/C0110 /C0053/C0046 Refer to Figure 1, and select wire of the specified size and insulation diameter. Strip the wire to the length indicated in Figure 1, taking care not to nick or cut wire strands. Refer to Figure 4, and proceed as follows: 1. Hold the tool so that the back (wire side) is facing you. Squeeze tool handles together and allow them to open fully. 2. Holding the contact by the mating end, insert the contact — insulation barrel first — into the front of the anvil. Make sure that the insulation barrel and wire barrel sit on the nest of the anvils and the open part of the wire barrel faces the top of the tool. /C0077/C0097/C0107/C0101 /C0115/C0117/C0114/C0101 /C0116/C0104/C0097/C0116 /C0098/C0111/C0116/C0104 /C0115/C0105/C0100/C0101/C0115 /C0111/C0102 /C0116/C0104/C0101 /C0105/C0110/C0115/C0117/C0108/C0097/C0116/C0105/C0111/C0110 /C0098/C0097/C0114/C0114/C0101/C0108 /C0097/C0114/C0101 /C0115/C0116/C0097/C0114/C0116/C0101/C0100 /C0101/C0118/C0101/C0110/C0108/C0121 /C0105/C0110/C0116/C0111 /C0116/C0104/C0101 /C0097/C0110/C0118/C0105/C0108/C0046 /C0068/C0079 /C0078/C0079/C0084 /C0097/C0116/C0116/C0101/C0109/C0112/C0116 /C0116/C0111 /C0099/C0114/C0105/C0109/C0112 /C0097/C0110 /C0105/C0109/C0112/C0114/C0111/C0112/C0101/C0114/C0108/C0121 /C0112/C0111/C0115/C0105/C0116/C0105/C0111/C0110/C0101/C0100 /C0099/C0111/C0110/C0116/C0097/C0099/C0116/C0046 3. Position the contact so that the locator drops into the wire stop slot of the contact. Make sure that the front of the wire barrel butts against the locator. 4. Hold the contact in position, and squeeze the tool handles together until ratchet engages sufficiently to hold the contact. DO NOT deform the insulation barrel or wire barrel. 5. Insert the stripped wire into the insulation barrel and wire barrel until it butts against the locator. 6. Holding the wire in place, squeeze the tool handles together until the ratchet releases. Allow the tool handles to open, and remove the crimped contact. /C0073/C0102 /C0116/C0104/C0101 /C0099/C0114/C0105/C0109/C0112/C0101/C0100 /C0099/C0111/C0110/C0116/C0097/C0099/C0116 /C0115/C0116/C0105/C0099/C0107/C0115 /C0105/C0110 /C0116/C0104/C0101 /C0099/C0114/C0105/C0109/C0112/C0105/C0110/C0103 /C0099/C0104/C0097/C0109/C0098/C0101/C0114/C0044 /C0114/C0101/C0109/C0111/C0118/C0101 /C0116/C0104/C0101 /C0099/C0111/C0110/C0116/C0097/C0099/C0116 /C0098/C0121 /C0112/C0117/C0115/C0104/C0105/C0110/C0103 /C0100/C0111/C0119/C0110/C0119/C0097/C0114/C0100 /C0111/C0110 /C0116/C0104/C0101 /C0116/C0111/C0112 /C0111/C0102 /C0116/C0104/C0101 /C0108/C0111/C0099/C0097/C0116/C0111/C0114/C0046 7. Inspect the contact crimp height according to Section 5. /C0078/C0079/C0084/C0069 /C0105 /C0067/C0065/C0085/C0084/C0073/C0079/C0078 /C0033 /C0078/C0079/C0084/C0069 /C0105
/C0052/C0048/C0056/C0045/C0049/C0048/C0050/C0048/C0055/C0080/C0082/C0079/C0045/C0067/C0082/C0073/C0077/C0080/C0069/C0082 /C0073/C0073/C0073 /C0072/C0097/C0110/C0100 /C0084/C0111/C0111/C0108/C0065/C0115/C0115/C0101/C0109/C0098/C0108/C0121/C0049/C0057/C0055/C0054/C0052/C0052/C0052/C0045/C0049/C0119/C0105/C0116/C0104/C0068/C0105/C0101/C0065/C0115/C0115/C0101/C0109/C0098/C0108/C0121/C0049/C0057/C0055/C0054/C0052/C0052/C0052/C0045/C0050 /C0053/C0111/C0102 /C0053/C0082/C0101/C0118/C0065 /C0084/C0121/C0099/C0111 /C0069/C0108/C0101/C0099/C0116/C0114/C0111/C0110/C0105/C0099/C0115 /C0067/C0111/C0114/C0112/C0111/C0114/C0097/C0116/C0105/C0111/C0110 3. Observe the ratchet adjustment wheel. If a tighter (smaller) crimp height is required, rotate the adjustment wheel counterclockwise to a higher–numbered setting. If a looser (larger) crimp height is required, rotate the adjustment wheel clockwise to a lower–numbered setting. 4. Re–assemble the lockscrew. 5. Make a sample crimp. If the crimp height is acceptable, the adjustment setting is correct. If the crimp height is unacceptable, continue to adjust the ratchet, and again measure a sample crimp. /C0055/C0046 /C0077/C0065/C0073/C0078/C0084/C0069/C0078/C0065/C0078/C0067/C0069 /C0065/C0078/C0068 /C0073/C0078/C0083/C0080/C0069/C0067/C0084/C0073/C0079/C0078 /C0055/C0046/C0049/C0046 /C0077/C0097/C0105/C0110/C0116/C0101/C0110/C0097/C0110/C0099/C0101 Ensure that the tool frame and dies are clean by wiping them with a clean, soft cloth. Remove any debris with a clean, soft brush. Do not use objects that could damage any components. When not in use, keep tool handles closed to prevent objects from becoming lodged in the dies, and store in a clean, dry area. /C0055/C0046/C0050/C0046 /C0086/C0105/C0115/C0117/C0097/C0108/C0073/C0110/C0115/C0112/C0101/C0099/C0116/C0105/C0111/C0110 Inspection of the dies should be made on a regular basis to ensure that they have not become worn or damaged. Inspect the crimping chambers for flattened, chipped, worn, or broken areas. If damage or abnormal wear is evident, the dies must be replaced. Refer to Section 7, REPLACEMENT. /C0056/C0046 /C0082/C0069/C0080/C0076/C0065/C0067/C0069/C0077/C0069/C0078/C0084 Customer–replaceable parts are shown in Figure 1. Available separately, Repair Kit 679221–1 includes a replacement lock nut and a variety of pins, rings, screws, and springs. If the dies are damaged or worn excessively, they must be replaced. Order the repair kit and replaceable parts through your representative, or call 1–800–526–5142, or send a facsimile of your purchase order to 717–986–7605, or write to: CUSTOMER SERVICE (038–035) TYCO ELECTRONICS CORPORATION PO BOX 3608 HARRISBURG PA 17105–3608 /C0057/C0046 /C0082/C0069/C0086/C0073/C0083/C0073/C0079/C0078 /C0083/C0085/C0077/C0077/C0065/C0082/C0089 /C0083Initial release of instruction sheet