1969 ADAFRUIT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
PRODUCT ID: 1969
Description
The Pogo Pin Probe Clip is a great way to test and connect with pin‐point accuracy without soldering! It's sort of like an alligator clip with a built in springy pogo pin ‐ so you can connect to any PCB pad for 'scoping, analyzing or multimetering The clip is strong enough to grip onto a PCB, but has a soft grip so it won't mar or damage circuits. The 'tongue' is a round ‐tip pogo pin ‐ a little spring ‐loaded contact that's very handy for making momentary electrically solid contacts. The continuity goes through the clip and out to a solder ‐friendly crimp connector. You could also use this for connecting to batteries, wearables, just about anything where you wish you had a third/fouth/etc hand to hold a probe in place.
o Max Voltage/Current: 100V / 1A o Length: 65mm / 2.6" o Opening: 30mm / 1.2" o Weight: 6.4g Engineered in NYC Adafruit ® https://www.adafruit.com/product/1969 7‐19‐17