195B125XUC CML | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
i (Anode / anode) F L = (1 NI [] Ee -e— a KH — yy y 4 L | 28x08 (Kathode / cathode) M22 x 1.5 nut @ 30 Alle Mae in mm / All dimensions are in mm Elektrische und optische Daten sind bel einer Umgebungstemperatur von 25°C gemessen. Electrical and optical data are measured at an ambient temperature of 25°C. Bestell-Nr. Farbe Spannung Strom Lichtstarke Part No. Colour Voltage Current Lumi. Intensity Tose i250 | om favacipe ‘eomed tesptasiue iavacine “00mes Tose i262 favacipe Some tesptasruc | iavacine 280med Tesprzewue fav acipe Some Lichtstarkedaten der verwendeten Leuchtdioden bei DC / Luminous intensity data of the used LEDs at DC Lagertemperatur / Storage temperature -25°C - +80°C Umgebungstemperatur / Ambient temperature -20°C - +60°C Spannungstoleranz / Voltage tolerance +10% Schutzart: IP67 nach DIN EN 60529 - Frontseitig zwischen LED und Gehause, sowie zwischen Gehause und Frontplatte bei Verwendung des mitgelieferten Dichtringes. Degree of protection: IP67 in accordance to DIN EN 60529 - Gap between LED and bezel and gap between bezel and frontplate sealed to IP67 when using the supplied gasket. Schwarzer Kunststoffreflektor / black plastic bezel Allgemeiner Hinweis: Bedingt durch die Fertigungstoleranzen der Leuchtdioden kann es zu geringfigigen ‘Schwankungen der Farbe (Farbtemperatur) kommen. Es kann deshalb nicht ausgeschlossen werden, dais die Farben der Leuchtdioden eines Fertigungsloses unterschiedlich wahrgenommen werden. General: Due to production tolerances, colour temperature variations may be detected within individual consignments. Die Anzeigen mit Flachsteckeranschliissen sind nicht fiir Létanschluss geeignet / The indicators with tabconnection are not qualified for soldering. Der Kunststoff (Polycarbonat) ist nur bedingt chemikalienbestandig / The plastic (polycarbonate) is limited resistant against chemicals. Die Auswahl und der technisch richtige Einbau unserer Produkte, nach den entsprechenden Vorschriften (z.8. VDE 0100 und 0160), obliegen dem Anwender / ‘The selection and technical correct installation of our products, conforming for the relevant standards (e.g. VDE 0100 and VDE 0160) is incumbent on the user. a CML Technologies GmbH & Co. KG H ( | ‘echnologies Gmi 0. . os M D-67098 Bad Diirkheim LED Indicator 22mm INNOVATIVE TECHNOLOGIES __ (formerly EBT Optronic) Standard Bezel with Flat Lens WHERE nNOvATION COMES TO LIGHT [__[revom ae: [names | Scale: 1:4 Datasheet: 195B125xUC