07010 DESCO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 DESCO EAST - One Colgate Way, Canton, MA 02021-1407 • (781) 821-8370 • Website: Desco.com TB-2039 Page 1 of 3 © 2019 DESCO INDUSTRIES INC Employee Owned Made in the United States of America Calibration Unit for Testers Installation, Operation and Maintenance
Description
The Desco 07010 Calibration Unit is designed to verify whether a tester is operating within specifications. This product can be used as one of the tools to fulfill the ANSI/ESD S20.20 paragraph 6.1.3.2 “Compliance Verification Plan.” The 07010 Calibration Unit is a passive device and requires no power source. The Calibration Unit is manufactured with industry accepted test ranges for both wrist straps and foot grounders. The wrist strap pass range is set at 750K - 10M, while the foot ground test range is set at 750K - 100M. The Desco Calibration Unit is calibrated to NIST traceable standards. The Desco 07010 Calibration Unit is to be used with the following items: Item Description
19240 Wrist Strap Tester
19280 Combo Tester
19282 Combo Tester with Stand and Foot Plate
19283 Combo Tester with Stainless Steel Foot Plate
19350 Wrist Strap Touch Tester, 120VAC
19351 Wrist Strap Touch Tester, 220VAC
NOTE: The 07010 Calibration Unit also calibrates the following discontinued items: 19250, 19252, 19253 February 2019 Figure 1. Desco 07010 Calibration Unit
1 Calibration Unit
2 Test Leads with Banana Plug Terminals
1 Certificate of Calibration
- Plug one of the included test leads into the black
banana jack labeled “E” on the Calibration Unit. Figure 2. Connecting the test lead from banana jack “E”
- Connect the second test lead to the red 675K
banana jack labeled “A” on the Calibration Unit.
- Observe the response from the Wrist Strap Tester.
- Repeat the procedure for test points B (825K), C