1906

1906 EFC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

TYPICAL TEMPERATURE CURVES POLYSTYRENE and FOIL -55 -25 0 25 50 85 105 -55 -25 0 25 50 85 105 Temperature (O C) DISSIPATION FACTOR VS. TEMPERATURECAPACITANCE CHANGE VS. TEMPERATURE % CAPACITANCE CHANGE % DISSIPATION FACTOR Temperature (O C) Temperature (O C) +25 +50 +85 +105 INSULATION RESISTANCE VS. TEMPERATURE 103 ELECTRONIC FILM CAPACITORS, INC. 107 106 105 104 IR (MEGOHMS X Ufd.) Reidville Industrial Park * 41 Interstate Lane WATERBURY, CONNECTICUT 06705 PHONE (203) 755-5629 FAX (203) 755-0659 3. DIELECTRIC STRENGTH At 25 O C, 200% of rated voltage when applied terminal to terminal for one minute through a current limiting resistance. 7. LIFE TEST Will withstand the application of 140% rated voltage at +85 0C for 250 hours with not more than one failure in 12 permitted. .06 .04 .02 6. DISSIPATION FACTOR Shall be 0.1 % max. when measured as in Par. 2. -.25 -.50 -.75 +.75 4. INSULATION RESISTANCE At 25 O C after 2 minutes charge time at rated voltage or 500 VDC, whichever is less, the minimum IR shall be 500,000 Megohm-Microfarads, but need not exceed 1,000,000 Megohms. 5. HUMIDITY RESISTANCE Series 1906 shall meet the requirements of MIL-STD. 202C, Method 103B. POLYSTYRENE and FOIL SERIES 1906 1. TEMPERATURE RANGE - 55 O C to + 85 O C at rated voltage. 2. CAPACITANCE Capacity shall be measured at 1KHz +20 HZ. Measurements shall be taken at 250C. EFC Series 1906 are polystyrene and foil capacitors. This series offers the advantage of extremely high insulation resistance (IR), low dissipation factor and very low dielectric absorption. 1906 have a linear negative temperature coefficient. Applications include: timing circuits and filters. Packaging options include: wrap and fill (TC), radial lead box (EFR), axial lead (EC, EF). Application options: -120 PPM/ 0C temperature coefficient (T1906), -80 PPM/0C temperature coefficient (A1906). SPECIFICATIONS +.25 +.50

TC - WRAP & FILL - ROUND - AXIAL TF - WRAP & FILL - FLAT - AXIAL EC - EPOXY CASE - ROUND - AXIAL EF - EPOXY CASE - FLAT - AXIAL EFR - EPOXY CASE - FLAT - RADIAL CAP ACITANCE IN MICROFARADS ( µµµµµF) VOLTAGE .35 - 35 VDC 0 - 50 VDC 1 - 100 VDC 2 - 200 VDC 3 - 300 VDC 4 - 400 VDC ETC. SIZE CODE 3 - STANDARD 2 - MINIATURE 1 - SUBMINIATURE X - NON-STANDARD FOR EFC METRIC CASES USE THE ONE LETTER CASE CODE LISTED. FOR EFC "EC" STYLE USE THE TWO LETTER CASE CODE. TOLERANCE 1 - 1% 2 - 2% 5 - 5% ETC. DIELECTRIC CODE 1206 - POLYPROPYLENE/FOIL 1213 - METALLIZED POLYPROPYLENE 1306 - POLYESTER/FOIL 1313 - METALLIZED POLYESTER 1606 - POLYCARBONATE/FOIL 1613 - METALLIZED POLYCARBONATE 1906 - POLYSTYRENE/FOIL CATALOG NOMENCLATURE * 1906 TC - 3 - .001 - 1 - 5 * OPTIONS THE FOLLOWING OPTIONS ARE AVAILABLE FROM EFC BY SPECIFYING THE APPROPRIATE PREFIX. A1206 = -150 PPM/O C +30 PPM T1206 = -270 PPM/O C +30 PPM 01906 = ZERO PPM/O C +50 PPM A1906 = -80 PPM/O C +30 PPM T1906 = -120 PPM/O C +30 PPM TEMPERATURE COEFFICIENTS: are as follows: HIGH VOLTAGE: EFC high voltage metallized polyester capacitors are designed for use in high voltage power supplies, rectifiers and other similar circuits. Voltage ratings to 15,000 DC are common-place at EFC. Specify with the prefix HV . AC CURRENT: Specify metallized polyester and termination procedures to enable EFC to supply a small sized AC rated capacitor for general purpose use at 60 HZ. Specify with the prefix AC. HIGH AMPERAGE AND PULSE CURRENTS: Dual metallized carriers allow these capacitors to handle high amperage and pulsing currents. Available in both polyester and polypropylene dielectrics. Specify with the prefix MF . Contact the factory for an MF spec. sheet. SWITCH MODE POWER SUPPLY: Polypropylene and polyester capacitors designed for SMPS have low ESR and high current rating should be specified with the SP prefix. EFC will manufacture to any non-standard value and size. Please consult factory for special requirements.

.001 .0012 .0015 .0022 .0027 .0039 .0047 .0056 .0068 .0082 .01 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 1.25 1.5 1906TC-2

50 VDC

100 VDC

200 VDC

400 VDC

600 VDCCap. µµµµµF EFC 1906TC 1.625" Min. Lead Specs. Tinned Copperweld Under .250D = 24 AWG .250 - .440D = 22 AWG Above .440D = 20 AWG Tubular Wrap and Fill DIMENSIONS and RATINGS 1906TC _ .050"+D< > D L D L D L D L D L EFC will manufacture to any non-standard value and size. Please consult factory for special requirements. (All dimensions in inches) .406 .406 .406 .406 .406 .406 .406 .406 .406 .531 .531 .531 .531 .531 .531 .656 .656 .656 .656 .656 .781 .781 .781 .781 .906 .906 .906 1.190 1.190 1.190 1.190 1.440 1.440 1.440 1.690 1.690 1.690 .160 .160 .160 .160 .160 .190 .200 .220 .240 .180 .190 .210 .230 .250 .280 .250 .270 .300 .320 .350 .340 .370 .410 .440 .440 .480 .530 .500 .550 .590 .650 .620 .690 .750 .750 .840 .920 .180 .180 .180 .180 .180 .210 .220 .240 .180 .200 .220 .230 .260 .280 .250 .280 .300 .330 .310 .340 .370 .410 .400 .440 .490 .450 .500 .550 .610 .590 .640 .700 .690 .760 .840 .930 1.020 .180 .180 .180 .220 .240 .190 .210 .230 .250 .270 .300 .260 .290 .320 .350 .340 .370 .400 .440 .430 .470 .510 .480 .530 .580 .640 .620 .680 .750 .740 .810 .890 .980 .406 .406 .406 .406 .406 .406 .406 .406 .531 .531 .531 .531 .531 .531 .656 .656 .656 .656 .781 .781 .781 .781 .906 .906 .906 1.190 1.190 1.190 1.190 1.440 1.440 1.440 1.690 1.690 1.690 1.690 1.690 .406 .406 .406 .406 .406 .531 .531 .531 .531 .531 .531 .656 .656 .656 .656 .781 .781 .781 .781 .906 .906 .906 1.190 1.190 1.190 1.190 1.440 1.440 1.440 1.690 1.690 1.690 1.690 .230 .250 .170 .200 .220 .260 .280 .240 .270 .290 .320 .350 .340 .370 .400 .390 .430 .470 .510 .470 .520 .570 .630 .600 .670 .730 .730 .810 .890 .970 1.060 .406 .406 .531 .531 .531 .531 .531 .656 .656 .656 .656 .656 .781 .781 .781 .906 .906 .906 .906 1.190 1.190 1.190 1.190 1.440 1.440 1.440 1.690 1.690 1.690 1.690 1.690 .240 .260 .290 .250 .270 .320 .350 .320 .350 .390 .370 .400 .450 .490 .450 .500 .550 .590 .650 .610 .670 .740 .730 .800 .890 .970 1.070 .531 .531 .531 .656 .656 .656 .656 .781 .781 .781 .906 .906 .906 .906 1.190 1.190 1.190 1.190 1.190 1.440 1.440 1.440 1.690 1.690 1.690 1.690 1.690 Reidville Industrial Park * 41 Interstate Lane * WATERBURY, CONNECTICUT 06705 Phone (203) 755-5629 FAX (203) 755-0659 ELECTRONIC FILM CAPACITORS, INC. Polystyrene and Foil Capacitors

600 VDCCap. µµµµµF EFC 1906EC 1.625" Min. Lead Specs. Tinned Copperweld Under .250D = 24 AWG .250 - .440D = 22 AWG Above .440D = 20 AWG Epoxy Case (Axial Leads) DIMENSIONS and RATINGS 1906EC _ .010"+D< > D L D L D L D L D L EFC will manufacture to any non-standard value and size. Please consult factory for special requirements. (All dimensions in inches) A A A A A B B B B B B B C C C C C D D D D E E E E F F Reidville Industrial Park * 41 Interstate Lane * WATERBURY, CONNECTICUT 06705 Phone (203) 755-5629 FAX (203) 755-0659 ELECTRONIC FILM CAPACITORS, INC. DIAMETER LENGTH 1 = .187 2 = .225 3 = .250 4 = .312 5 = .375 6 = .437 7 = .500 SIZE CODE A A A A A B B B B B B C C C D D D D D D E E E E F F A A A B B B B C C C C C D D D D E E E E F F B B B B B C C C C D D D D E E E E F F C C C C C D D D E E F F F F F Polystyrene and Foil Capacitors .001 .0012 .0015 .0022 .0027 .0039 .0047 .0056 .0068 .0082 .01 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .12 .15 .18 .22 D = .750 E = .875 F = 1.190 A = .375 B = .500 C = .625