1902 ADAFRUIT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Features

 Shield is fully assembled, no soldering required (besides adding pins to the Teensy)  HUB75 pinout, connects to panel directly or using panel's ribbon cable  5V level shifters for better compatibility with 5V panels  Support for driving Dotstar/APA102 LEDs in parallel with the LED panel, connects directly to 4‐ pin JST SM cable on Dotstar LEDs, or use the included cable  Expansion rows for main Teensy pins, making signals available for prototyping  Teensy is easily removed from the shield  The latest version of the library supports 5‐address pins so you can use 64x64 pixel displays (You'll need a Teensy 3.6 for driving displays this big) Note: compared to previous versions of the SmartMatrix Shield, the microSD card slot was removed, as it is redundant when combined with the Teensy 3.5/3.6 The shield brings the 13 I/O signals needed to drive the panel out to a connector that matches the pinout on the panel, and brings the rest of the I/O signals out to convenient expansion headers. The board includes pre-soldered 5V level shifters.

It's a great board for easily expanding your Teensy's capabilities. You'll also need to program in your Teensy with the SmartMatrix code available on the project website. TECHNICAL DETAILS-  Dimensions: 52mm x 49mm x 6mm / 2" x 1.9" x 0.23"  Length with attached cable: 138 mm  Height w/ Components: 15mm / 0.6"  Weight: 12g (only board), 22g (board w/header and cable) Full Kit Contents  SmartLED Shield V4  Male 4-pin JST SM Cable (10cm)  2x8 Extra Long Pin Header Revision History:  As of Monday, December 11th, 2017 we are selling the upgraded SmartMatrix SmartLED Shield (V4) for Teensy 3. https://www.adafruit.com/product/1902/11‐17‐20