18HM SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

Applications

  • Incorporates the world leading Klixon® snap action bimetal
  • Line break / Automatic reset
  • Low profile permits the device to be installed directly on the compressor’s power terminal pins within a cluster block housing for closely coupled temperature monitoring
  • Enhanced over-temperature protection against running overload high / low voltage locked rotor loss of refrigeration charge shorted capacitor high discharge temperature
  • Rugged welded construction
  • Reduced installation costs
  • Optimal termination
  • Air Conditioning Compressors TECHNICAL SPECIFICATIONS Compressor Range Up to 2HP Rated Voltage 230 Volts Rated Current 60 Amps Opening Temperature 100°C to 180°C (5°C Increments) Closing Temperature To suit application ± 9°C Pressure Rating 2100 PSIG 145 bar Current ratings are based on life test data which has demonstrated high reliability at 0.7 power factor on Sensata test boards. These capacities are intended as a guide for application work

www.sensata.com Page 2 Copyright © 2018 Sensata Technologies, Inc. All dimensions in millimeters (inches). DIMENSIONS AND SCHEMATICS Electrical Schematic Unit L W H P1 P2 P3 A B ORDERING OPTIONS Example : 18HM-XXX-XXX Basic Part Number

Electrical Characteristics

Quick Connects, Wire Leads, Sleeves, etc. 18HM XXX XXX When making an inquiry for Klixon® hermetically sealed motor protectors, be certain to specify the entire part number for your application, if known. The six digits following the series identification indicate your specific electrical and physical requirement.

+1 508 236 2551 electrical-protection-sales@ sensata.com Europe, Middle East & Africa +3 174 357 8156 info-sse@list.sensata.com Asia Pacific EP_Asia_Public@list.sensata.com China +86(21)2306 1651 Japan +81(45)277 7104 Korea +82 (53) 644 9685 India / Middle East +91(40)4033 9611 Rest of Asia +65 (6478) 6860 Page 3 Rev:10/05/18 www.sensata.com CONTACT USSensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA.Copyright © 2018 Sensata Technologies, Inc. Agency File Number UL / C-UL E15962 CQC CQC07002018881 KEMA (ENEC) 2018218.05 Compliant with RoHS (European Directive 2002/95/EC Restrictions On Use Of Hazardous Substances) AGENCY APPROVALS & CERTIFICATIONS WARNINGS RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE

  • The product’s side panels may be hot, allow the product to cool before touching
  • Follow proper mounting instructions including torque values
  • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage. HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
  • Disconnect all power before installing or working with this equipment
  • Verify all connections and replace all covers before turning on power Failure to follow these instructions will result in death or serious injury