18E-PO-1YA-E5-D-S4 BALLUFF | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Internet www.balluff.com For definitions of terms, see main catalog eCl@ss 9.1: 27-27-09-03 Balluff Germany +49 (0) 7158 173-0, 173-370 Subject to change without notice ETIM 6.0: EC001821 Balluff USA 1-800-543-8390 BOS0015_09-03-17_18:50 Balluff China +86 (0) 21-50 644131 1(2) Electrical connection Connection M12x1-Connector, 4-pole, A- coded Contact, surface protection Gold plated Polarity reversal protected yes Short-circuit protection yes Electrical data Hysteresis H max. (% of Sr) 15.0 % Load capacitance max. at Ue 1 µF No-load current Io max. at Ue 20 mA Operating voltage Ub 10…30 VDC Output resistance Ra 33.0 kOhm Pollution degree 3 Protected against miswiring yes Rated insulation voltage Ui 250 V AC Rated operating current Ie DC 200 mA Rated operating voltage Ue DC 24 V Ready delay tv max. 10 ms Repeat accuracy max. (% of Sr) 5.0 % Residual current Ir max. 50 µA Switching frequency 100 Hz Turn-off delay toff max. 5 ms Turn-on delay ton max. 5 ms Utilization category DC -13 Voltage drop Ud max. at Ie 2.5 V Environmental conditions Ambient temperature -5…75 °C Protection class II Protection type IEC 60529 IP68 General data Approval/Conformity cULus CE Basic standard IEC 60947-5-2 Series 18E Style Cylinder Straight optics Material Housing material Stainless steel (1.4571) Material sensing surface Glass Mechanical data Dimension Ø 18 x 70 mm Fastening detail Nut M18x1 Tightening torque max. 30 Nm 40 Nm Optical data Ambient light max. 10000 Lux Beam characteristic Divergent Light type LED Red light Wave length 665 nm Output/Interface Switching output PNP Normally closed (NC) 1) Optical axis
Internet www.balluff.com For definitions of terms, see main catalog eCl@ss 9.1: 27-27-09-03 Balluff Germany +49 (0) 7158 173-0, 173-370 Subject to change without notice ETIM 6.0: EC001821 Balluff USA 1-800-543-8390 BOS0015_09-03-17_18:50 Balluff China +86 (0) 21-50 644131 2(2) Range/Distance Measuring range 0…100 mm Range 0…100 mm Rated operating distance Sn 100 mm Ripple max. (% of Ue) 15 % Temperature drift max. (% of Sr) 10 % Remarks Order accessories separately. Reference object (target): gray card, 100 x 100 90 % remission, axial approach. The sensor is functional again after the overload has been eliminated. Only for applications per NFPA 79 (machines with a supply voltage of maximum 600 V). Use an R/C (CYJV2) cable with suitable properties for attaching the device. Connector view Wiring Diagram Symbols for Optoelectronic Sensors