18CE MSYSTEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MODEL: 18CE 18CE SPECIFICATIONS ES-1837 Rev.7 Page 1/2 http://www.m-system.co.jp/ Rack-mounted DCS Signal Conditioners 18-RACK CT CONVERTER Functions & Features
- Converting an alternating current from a current transformer into two standard process signals
- Minimum ripple
- True RMS sensing
- Second channel output available at the front terminals and at the Standard Rack connector Typical Applications
- Centralized monitoring and control of motors, pumps or heaters by DCS
- Monitoring power line and power supply current MODEL: 18CE–[1]66–R
ORDERING INFORMATION
- Code number: 18CE-[1]66-R Specify a code from below for [1]. (e.g. 18CE-166-R) [1] INPUT Current 1: 0 – 1 A AC 5: 0 – 5 A AC OUTPUT 1 Voltage 6: 1 – 5 V DC (Load resistance 2000 Ω min.) OUTPUT 2 Voltage 6: 1 – 5 V DC (Load resistance 2000 Ω min.) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) GENERAL SPECIFICATIONS Construction: Rack-mounted; terminal access via screw terminals on the front and connector on the rear; terminal cover provided Connection Input: M3.5 screw terminals (torque 0.8 N·m) Output 1: Connector Output 2: M3.5 screw terminals (torque 0.8 N·m) and connector Power input: Supplied from connector Screw terminal: Nickel-plated steel Isolation: Input to output 1 to output 2 to power Input waveform: Up to 15 % of 3rd harmonic content Overrange output: Approx. 0 to 120 % at 1 – 5V Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (front) INPUT SPECIFICATIONS Frequency: 50 or 60 Hz Input burden: 0.5 VA max. Overload capacity: 500 % of rating for 5 sec., 120 % continuous Operational range: 0 – 120 % of rating INSTALLATION Current consumption: Approx. 35 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Standard Rack 18BXx or 18KBXx Weight: 150 g (0.33 lb) PERFORMANCE in percentage of span Accuracy: ±0.4 % Temp. coefficient: ±0.02 %/°C (±0.01 %/°F) Response time: ≤ 0.5 sec. (0 – 90 %) Ripple: 0.5 %p-p max. Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (input to output 1 or output 2 or power)
500 V AC @ 1 minute
(output 1 to output 2 to power)
1500 V AC @ 1 minute
(input or output or power to ground)
MODEL: 18CE 18CE SPECIFICATIONS ES-1837 Rev.7 Page 2/2 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS unit: mm (inch) 110 (4.33 ) 93 (3.66) 24 (.94) 7 (.28) 78 (3.07)32 (1.26) 8–M3.5 SCREW 7 (.28) 2–M3 SCREW TERMINAL ASSIGNMENTS 1 2 3 4 7 8 5 6 SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Output Driver SZ Output Driver Voltage/ Duty Cycle Isolation RMS Operation Low Drift Amplifier SZ LOAD SOURCE k l CT L K OUTPUT 2 6CONNECTOR OUTPUT 2 OUTPUT 1 POWER Specifications are subject to change without notice.