1839770000 WEIDMULLER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Creation date 09 September 2020 07:56:53 CEST Catalogue status 28.08.2020 / We reserve the right to make technical changes. 1 OMNIMATE Signal - series BL/SL 5.08 BLZ 5.08/04/180QV2 SN OR BX PRT Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Product image Female plugs with clamping-yoke screw connections for connecting wire, with straight 180° wire outlet direction and internal cross-connections between connections 1-2 and 3-4. Bus current at 4 mm² (without wire-end ferrule) is up to 32 A. The female plugs can be coded. General ordering data Type BLZ 5.08/04/180QV2 SN OR BX PRT Order No. 1839770000 Version PCB plug-in connector, female plug, 5.08 mm, Number of poles: 4, 180°, Clamping yoke connection, Clamping range, max. : 4 mm², Box GTIN (EAN) 4032248350292 Qty. 90 pc(s). Product data IEC: 400 V / 17.5 A / 0.2 - 4 mm² UL: 300 V / 15 A / AWG 30 - AWG 12 Packaging Box

OMNIMATE Signal - series BL/SL 5.08 BLZ 5.08/04/180QV2 SN OR BX PRT Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.comTechnical data Creation date 09 September 2020 07:56:53 CEST Catalogue status 28.08.2020 / We reserve the right to make technical changes. 2 Dimensions and weights Width 20.32 mm Width (inches) 0.8 inch Height 15.2 mm Height (inches) 0.598 inch Depth 20.1 mm Depth (inches) 0.791 inch Net weight 7.31 g System Parameters Product family OMNIMATE Signal - series BL/SL 5.08 Type of connection Field connection Wire connection method Clamping yoke connection Pitch in mm (P) 5.08 mm Pitch in inches (P) 0.2 inch Conductor outlet direction 180° Number of poles 4 L1 in mm 15.24 mm L1 in inches 0.6 inch Number of rows 1 Pin series quantity 1 Rated cross-section 2.5 mm² Touch-safe protection acc. to DIN VDE 57 106 Safe from finger touch Touch-safe protection acc. to DIN VDE

0470 IP 20

Volume resistance ≤ 5mΩ Can be coded Yes Stripping length 7 mm Tightening torque, min. 0.4 Nm Tightening torque, max. 0.5 Nm Clamping screw M 2.5 Screwdriver blade 0.6 x 3.5 Screwdriver blade standard DIN 5264 Plugging cycles 25 Plugging force/pole, max. 8.5 N Pulling force/pole, max. 6.5 N Material data Insulating material PBT Colour orange Colour chart (similar) RAL 2000 Insulating material group IIIa Comparative Tracking Index (CTI) ≥ 200 Insulation strength ≥ 108 Ω UL 94 flammability rating V-0 GWFI 960 °C Contact material Copper alloy Contact surface tinned Layer structure of plug contact 4...8 µm Sn hot-dip tinned Storage temperature, min. -40 °C Storage temperature, max. 70 °C Operating temperature, min. -50 °C Operating temperature, max. 100 °C Temperature range, installation, min. -25 °C Temperature range, installation, max. 100 °C Conductors suitable for connection Clamping range, min. 0.13 mm² Clamping range, max. 4 mm² Wire connection cross section AWG, min. AWG 26 Wire connection cross section AWG, max. AWG 12 Solid, min. H05(07) V-U 0.2 mm² Solid, max. H05(07) V-U 2.5 mm² Flexible, min. H05(07) V-K 0.2 mm² Flexible, max. H05(07) V-K 4 mm² w. plastic collar ferrule, DIN 46228 pt 4, min. 0.2 mm² w. plastic collar ferrule, DIN 46228 pt 4, max. 2.5 mm² w. wire end ferrule, DIN 46228 pt 1, min. 0.2 mm² w. wire end ferrule, DIN 46228 pt 1, max. 2.5 mm²

OMNIMATE Signal - series BL/SL 5.08 BLZ 5.08/04/180QV2 SN OR BX PRT Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.comTechnical data Creation date 09 September 2020 07:56:53 CEST Catalogue status 28.08.2020 / We reserve the right to make technical changes. 3 Clampable conductor Cross-section for conductor connection Type fine-wired nominal 0.5 mm² wire end ferrule Stripping length nominal 6 mm Recommended wire- end ferrule H0,5/6 Cross-section for conductor connection Type fine-wired nominal 1 mm² wire end ferrule Stripping length nominal 6 mm Recommended wire- end ferrule H1,0/6 Cross-section for conductor connection Type fine-wired nominal 1.5 mm² wire end ferrule Stripping length nominal 7 mm Recommended wire- end ferrule H1,5/7 Cross-section for conductor connection Type fine-wired nominal 2.5 mm² wire end ferrule Stripping length nominal 7 mm Recommended wire- end ferrule H2,5/7 Cross-section for conductor connection Type fine-wired nominal 0.75 mm² wire end ferrule Stripping length nominal 6 mm Recommended wire- end ferrule H0,75/6 Reference text The outside diameter of the plastic collar should not be larger than the pitch (P), Length of ferrules is to be chosen depending on the product and the rated voltage. Max. clamping range 4 mm² Rated data acc. to IEC tested acc. to standard IEC 60664-1, IEC 61984 Rated current, min. number of poles (Tu=20°C) 17.5 A Rated current, min. number of poles (Tu=40°C) 15 A Rated voltage for surge voltage class / pollution degree II/2 400 V Rated voltage for surge voltage class / pollution degree III/2 320 V Rated voltage for surge voltage class / pollution degree III/3 250 V Rated impulse voltage for surge voltage class/ pollution degree II/2 4 kV Rated impulse voltage for surge voltage class/ pollution degree III/2 4 kV Rated impulse voltage for surge voltage class/ contamination degree III/3 4 kV Rated data acc. to CSA Institute (CSA) Certificate No. (CSA) 200039-1121690 Rated voltage (Use group B / CSA) 300 V Rated voltage (Use group D / CSA) 300 V Rated current (Use group B / CSA) 15 A Rated current (Use group D / CSA) 10 A Wire cross-section, AWG, min. AWG 30 Wire cross-section, AWG, max. AWG 12 Reference to approval values Specifications are maximum values, details - see approval certificate.

OMNIMATE Signal - series BL/SL 5.08 BLZ 5.08/04/180QV2 SN OR BX PRT Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.comTechnical data Creation date 09 September 2020 07:56:53 CEST Catalogue status 28.08.2020 / We reserve the right to make technical changes. 4 Rated data acc. to UL 1059 Institute (UR) Certificate No. (UR) E60693 Rated voltage (Use group B / UL 1059) 300 V Rated voltage (Use group D / UL 1059) 300 V Rated current (Use group B / UL 1059) 15 A Rated current (Use group D / UL 1059) 10 A Wire cross-section, AWG, min. AWG 30 Wire cross-section, AWG, max. AWG 12 Reference to approval values Specifications are maximum values, details - see approval certificate. Packing Packaging Box VPE length 45 mm VPE width 130 mm VPE height 230 mm Classifications ETIM 6.0 EC002638 ETIM 7.0 EC002638 eClass 9.0 27-44-03-09 eClass 9.1 27-44-03-09 eClass 10.0 27-44-03-09 UNSPSC 30-21-18-10 Notes Notes • Additional colours on request

  • Gold-plated contact surfaces on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Long term storage of the product with average temperature of 50 °C and average humidity 70%, 36 months IPC conformity Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. Approvals Approvals ROHS Conform

OMNIMATE Signal - series BL/SL 5.08 BLZ 5.08/04/180QV2 SN OR BX PRT Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.comTechnical data Creation date 09 September 2020 07:56:53 CEST Catalogue status 28.08.2020 / We reserve the right to make technical changes. 5 Downloads Approval/Certificate/Document of Conformity Declaration of the Manufacturer Brochure/Catalogue FL DRIVES EN MB DEVICE MANUF. EN FL DRIVES DE CAT 2 PORTFOLIOGUIDE EN FL BUILDING SAFETY EN FL APPL LED LIGHTING EN FL INDUSTR.CONTROLS EN FL MACHINE SAFETY EN FL HEATING ELECTR EN FL APPL_INVERTER EN FL_BASE_STATION_EN FL ELEVATOR EN FL POWER SUPPLY EN FL 72H SAMPLE SER EN PO OMNIMATE EN Engineering Data WSCAD

OMNIMATE Signal - series BL/SL 5.08 BLZ 5.08/04/180QV2 SN OR BX PRT Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.comDrawings Creation date 09 September 2020 07:56:53 CEST Catalogue status 28.08.2020 / We reserve the right to make technical changes. 6 Dimensional drawing Graph