182NQ030

182NQ030 IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

SCHOTTKY RECTIFIER 180 Amp 182NQ030 PD-2.278 rev. A 12/97 1www.irf.com Dimensions in millimeters and inches Outline HALF PAK Module CASE STYLE AND DIMENSIONS Major Ratings and Characteristics Description/Features The 182NQ030 high current Schottky rectifier module has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, convert- ers, free-wheeling diodes, and reverse battery protection. 150° C T J operation Unique high power, Half-Pak module Replaces three parallel DO-5's Easier to mount and lower profile than DO-5's High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability IF(AV) Rectangular 180 A waveform VRRM 30 V IFSM @ tp = 5 µs sine 30,000 A VF @ 180Apk, TJ=125°C 0.41 V TJ range - 55 to 150 °C Characteristics 182NQ030 Units

PD-2.278 rev. A 12/97 2 www.irf.com TJ Max. Junction Temperature Range -55 to 150 °C Tstg Max. Storage Temperature Range -55 to 150 °C R thJC Max. Thermal Resistance Junction0.30 °C/W DC operation * See Fig. 4 to Case R thCS Typical Thermal Resistance, Case to0.15 °C/W Mounting surface , smooth and greased Heatsink wt Approximate Weight 25.6 (0.9) g (oz.) T Mounting Torque Min. 40 (35) Non-lubricated threads Max. 58 (50) Terminal Torque Min. 58 (50) Max. 86 (75) Case Style HALF PAK Module Thermal-Mechanical Specifications Parameters 182NQ Units Conditions Kg-cm (Ibf-in) VFM Max. Forward Voltage Drop (1)0.51 V @ 180A * See Fig. 1 0.61 V @ 360A

0.41 V @ 180A

0.54 V @ 360A

IRM Max. Reverse Leakage Current (1) 15 mA T J = 25 °C * See Fig. 2 840 mA T J = 125 °C CT Max. Junction Capacitance 7700 pF V R = 5VDC , (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 6.0 nH From top of terminal hole to mounting plane dv/dt Max. Voltage Rate of Change 10,000 V/ µs (Rated VR) TJ = 25 °C TJ = 125 °C VR = rated VR Parameters 182NQ Units Conditions (1) Pulse Width < 300µs, Duty Cycle < 2% Electrical Specifications IF(AV) Max. Average Forward Current 180 A 50% duty cycle @ T C = 107° C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive30,000 5µs Sine or 3µs Rect. pulse Surge Current * See Fig. 7 3450 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 162 mJ T J = 25 °C, IAS = 36 Amps, L = 0.25 mH IAR Repetitive Avalanche Current 36 A Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Parameters 182NQ Units Conditions A Following any rated load condition and with rated V RRM applied Part number 182NQ030 VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 30 Voltage Ratings Absolute Maximum Ratings

PD-2.278 rev. A 12/97 3www.irf.com Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Fig. 1 - Maximum Forward Voltage Drop Characteristics .01 100 1000 10000 0 5 10 15 20 25 3 0 R R 125°C 100°C 75°C 50°C 25°C Reverse Vol tage - V (V) R everse C urrent - I (m A ) T = 150°CJ 1000 10000 0 5 10 15 20 25 30 3 5 T = 25°CJ Reverse Voltage - V (V)R TJunction Capaci tance - C (pF ) 100 1000 FM FInstantaneous Forward Current - I (A) Forward Voltage Drop - V (V) T = 150°C T = 125°C T = 25°C J J J .001 .01 D = 0.33 D = 0.50 D = 0.25 D = 0.17 D = 0.08 thJC t , R ectangular P ulse D uration (Seconds) Thermal Impedance - Z (°C/W) S ingle P ulse (Thermal Resistance) PDM Notes: 1. D uty factor D = t / t 2. P eak T = P x Z + T JD M t h J C C

PD-2.278 rev. A 12/97 4 www.irf.com Fig. 8 - Unclamped Inductive Test Circuit Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current 100 120 0 40 80 120 160 200 240 28 DC Average Power Loss - (Watts) F(AV) D = 0.08 D = 0.17 D = 0.25 D = 0.33 D = 0.50 RMS Limi t Average Forward Current - I (A) 110 120 130 140 150 160 0 50 100 150 200 250 30 DC Al l owabl e Case Temperature - (°C) A verage F orw ard C urrent - I (A )F(AV) 182NQ030 R (D C ) = 0.30°C/WthJC 1000 10000 100000 10 100 1000 10000 FSM p Non-Repetitive Surge Current - I (A) At Any Rated Load Condition And With Rated V Applied Following Surge RRM Square Wave Pulse Duration - t (microsec) FREE-WHEEL DIODE 40HFL40S02CURRENT MONITOR HIGH-SPEED SWITCHIRFP460 L DUT Rg = 25 ohm Vd = 25 Volt+