18014RC ARIES | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
- INFO@ARIESELEC.COMWWW.ARIESELEC.COM
FEATURES
- C onverts PLCC packaged ICs-to-DIP footprints.
- I deal for prototyping and testing/evaluation.
- A vailable with PLCC Sockets or PLCC Pads on top side.
- C onsult factory for Panelized Form or for mounting of consigned ICs. GENERAL SPECIFICATIONS
- A DAPTER BODY: 0.062 [1.58] FR-4 or IS410 per IPC 4101A/26 with 1-oz. Cu traces, both sides finished with ENIG (Immersion Au over Electroless Ni)
- P INS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
- P IN PLATING: 10µ [0.254µ] min. Au per MIL-G-45204 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290
- O PTIONAL PLCC SURFACE MOUNT SOCKETS: UL 94V-0 PPS
- S OCKET CONTACTS: Phophros Bronze, Pb-plated (RoHS-compliant)
- C URRENT RATING: 1 amp
- O PERATING TEMPERATURE: 221°F [105°C] MOUNTING CONSIDERATIONS
- W ill plug into standard IC socket
- S ee Table for Pad Layout when mounting PLCC socket 18014RC Rev. AB Series 652000 and 653000 RoHs/WEEE-Compliant PLCC-to-DIP Adapter No. of Pins 2 8, 32, 44, 68, 84 Series 6 52000: without socket 6 53000: with socket
ORDERING INFORMATION
±0.003 [0.08] non-cumulative Dim. “X” ±0.003 [0.08] non-cumulative Dim “Y” ±0.003 [0.08] Dim. “Z” ±0.003 [0.08] Pad Size CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS