18013 ARIES | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
- INFO@ARIESELEC.COMWWW.ARIESELEC.COM
FEATURES
- 8 -position SOIC footprint on the top and a circular, 8-pin JEDEC TO male pin footprint on the bottom. IC now available only in 8-position SOIC packages, can be readily mounted on boards having JEDEC TO thru-hole footprints without having to redesign the board.
- C onsult factory for mounting of consigned chips. GENERAL SPECIFICATIONS
- A DAPTER BOARD: FR-4, 0.062 [1.58] thick, with 1-oz. Cu traces both sides
- M ALE PIN: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
- M ALE PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 ASTM B579-73 over 100µ [2.54µ] Ni per SAE-AMS-QQ-N-290
- O PERATING TEMPERATURE: 221°F [105°C] MOUNTING CONSIDERATIONS 18013 Rev. AA SOIC-to-JEDEC TO Adapter
ORDERING INFORMATION
P/N Dim “C” 1109814 0.200[5.08] 08-301296-10 0.300[7.62] 08-305479-10 0.270[6.85] CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED DIP-to-TO ADAPTER ALSO AVAILABLE. CONSULT DATA SHEET 18012 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS