18012 ARIES | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

  • INFO@ARIESELEC.COMWWW.ARIESELEC.COM

FEATURES

  • 8 -pin DIP IC Socket on the top and a circular, 8-pin JEDEC TO male pin footprint on the bottom. ICs now available only in 8-pin DIPs can be readily-mounted on boards having JEDEC TO thru-hole footprints without having to redesign the board. GENERAL SPECIFICATIONS
  • S OCKET BODY: black UL 94V-0 glass-filled 4/6 Nylon 170°C continuous use temp.
  • A DAPTER BOARD: FR-4, 0.062 [1.58] thick
  • F EMALE PIN: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
  • F EMALE PIN PLATING: 10µ [0.25µ] min. Au per MIL -G- 45204 over 100µ [2.54µ] Ni per SAE-AMS-QQ-N- 290
  • F EMALE PIN CONTACT: BeCu per UNS C17200, ASTM B194-08
  • F EMALE PIN CONTACT PLATING: 10µ [0.25µ] Au per MILG- 45204 over 50µ [1.27µ] Ni per SAE-AMS-QQN- 290
  • M ALE PIN: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
  • M ALE PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 per ASTM B579-73 over 100µ [2.54µ] Ni per SAE-AMS-QQ-N-290
  • C URRENT RATING: 3 amps
  • O PERATING TEMPERATURE: 221°F [105°C]1109522
  • I NSERTION FORCE: 180 grams/pin; based on a 0.018 [0.46] dia. test lead
  • W ITHDRAWAL FORCE: 90 grams/pin; based on a 0.018 [0.46] dia. test lead
  • N ORMAL FORCE: 140 grams/pin; based on a 0.018 [0.46] dia. test lead MOUNTING CONSIDERATIONS 18012 Rev. AB P/Ns 1109522 and 1109523 DIP-to-JEDEC TO Adapter Socket

ORDERING INFORMATION

P/N 1109523 see Pin Layouts Below CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS