18011RC ARIES | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
- INFO@ARIESELEC.COMWWW.ARIESELEC.COM
FEATURES
- P b-Free RoHS/WEEE-compliant
- A cost-effective means of upgrading to SOJ or SOIC without changing your PCB layout. for Adapters on 0.300 [7 .62] centers. GENERAL SPECIFICATIONS
- BOARD MATERIAL : 0.062 [1.58] thick FR-4 or IS410 per IPC4101A/26 with 1-oz. Cu traces, both sides
- P ADS: finished with ENIG (Immersion Au over Electroless Ni)
- P INS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
- P IN PLATING: 10µ [0.254µ] min. Au per MIL-G-4524 over 100µ [2.54µ] min. Ni per SAE-AMS-QQ-N-290
- O PERATING TEMPERATURE: 221°F [105°C] MOUNTING CONSIDERATIONS 18011RC Rev. AB Series 45000X-11-RC and 65000X-11-RC SOIC & SOJ-to-DIP Adapter RoHS/WEEE-Compliant
ORDERING INFORMATION
(See Table below) CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice.ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED “A” = NO. OF PINS PER ROW x 0.100 [2.54] “D” = (NO. OF PINS PER ROW - 1) x 0.100 [2.54] CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS