17TS-55-R/BN

17TS MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

MODEL: 17TS http://www.m-system.co.jp/ 17TS SPECIFICATIONS ES-2912 Rev.0 Page 1/3 Rack-mounted Power Transducers 17-RACK THERMOCOUPLE CONVERTER Functions & Features

• Accepting direct input from a thermocouple and providing a standard process signal
• 5-segment linearization
• Burnout protection
• High-accuracy cold junction compensation Typical Applications
• High-accuracy cold junction compensation benefits narrow span measurements
• 0.1 μA burnout sensing enables long distance transmission with minimum offset drifts
• Electric furnace (isolation)
• No burnout type can connect to a single T/C in parallel with a recorder MODEL: 17TS–[1]6–R[2]

ORDERING INFORMATION

• Code number: 17TS-[1]6-R[2] Specify a code from below for each [1] and [2]. (e.g. 17TS-26-R/BL)
• Temperature range (e.g. 0 – 800°C) [1] INPUT THERMOCOUPLE 1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F) 2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F) 3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F) 4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F) 5: T (CC) (Usable range -270 to +400°C, -454 to +752°F) 6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F) 7: R (Usable range -50 to +1760°C, -58 to +3200°F) 8: S (Usable range -50 to +1760°C, -58 to +3200°F) N: N (Usable range -270 to +1300°C, -454 to +2372°F) 0: Specify OUTPUT Voltage 6: 1 – 5 V DC (Load resistance 2000 Ω min.) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [2] OPTIONS Burnout blank: Upscale burnout /BL: Downscale burnout /BN: No burnout GENERAL SPECIFICATIONS Construction: Rack-mounted; terminal access via screw terminals on the front and connector on the rear; terminal cover provided Connection: Input: M3.5 screw terminals (torque 0.8 N·m) Output: Connector Power input: Supplied from connector Screw terminal: Nickel-plated steel Isolation: Input to output to power Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (front) Linearization: Standard Cold junction compensation: CJC sensor attached to the input terminals (B thermocouple is without CJC as standard) INPUT SPECIFICATIONS Input resistance: 20 kΩ minimum Burnout sensing: 0.1 μA Minimum span: 3 mV Offset: Max. 1.5 times span Minimum span (in °C) (PR): 370°C K (CA): 75°C E (CRC): 50°C J (IC): 60°C T (CC): 75°C B (RH): 780°C R: 360°C S: 380°C N: 110°C Minimum span (in °F) (PR): 670°F K (CA): 140°F

MODEL: 17TS http://www.m-system.co.jp/ 17TS SPECIFICATIONS ES-2912 Rev.0 Page 2/3 E (CRC): 90°F J (IC): 110°F T (CC): 140°F B (RH): 1410°F R: 650°F S: 690°F N: 200°F For the temperatures that range below 0°C, the transmitter may partially not satisfy the described accuracy. Consult factory. INSTALLATION Current consumption: Approx. 35 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 40 to 85 % RH (non-condensing) Mounting: Standard Rack 17BXE Weight: 150 g (0.33 lb) PERFORMANCE in percentage of span Accuracy: ±0.4 % (at over 400°C or 750°F for R, S and PR; over 770°C or 1420°F for B) Cold junction compensation error (at 20°C ±10°C or 68°F ±18°F) K, E, J, T, N: ±0.5°C or ±0.9°F S, R, PR: ±1°C or ±1.8°F Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) (at over 400°C or 750°F for R, S and PR; over 770°C or 1420°F for B) Response time: ≤ 0.5 sec. (0 – 90 %) Burnout response: ≤ 10 sec. Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (input to output or power)

500 V AC @ 1 minute (outut to power)

1500 V AC @ 1 minute (input or output or power to ground)

DIMENSIONS unit: mm (inch) 110 (4.33 ) 93 (3.66) 24 (.94) 7 (.28) 78 (3.07)32 (1.26) 8–M3.5 SCREW 7 (.28) 2–M3 SCREW

MODEL: 17TS http://www.m-system.co.jp/ 17TS SPECIFICATIONS ES-2912 Rev.0 Page 3/3 TERMINAL ASSIGNMENTS 8 7 1 2 3 4 CJC SENSOR (model: CJM) r b SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM *Deleted with Option /B thermocouple. SZ CJC Sensing Volt. Generator Voltage/ Duty CycleLinearizer Burnout Protection Low Drift Amplifier OUTPUT Output Driver POWER CJC SENSOR red black 3 * T / C comp. leadwire CONNECTOR Isolation (model: CJM) Specifications are subject to change without notice.