17PE MSYSTEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MODEL: 17PE http://www.m-system.co.jp/ 17PE SPECIFICATIONS ES-2938 Rev.0 Page 1/2 Rack-mounted Power Transducers 17-RACK PT TRANSMITTER Functions & Features
- Converting an alternating voltage from a potential (voltage) transformer into a standard process signal
- Minimum ripple Typical Applications
- Centralized monitoring and control of power line and power supply voltage measured at switch boards
- Monitoring abnormal voltage drops for detecting overload MODEL: 17PE–[1]6-R
ORDERING INFORMATION
- Code number: 17PE-[1]6-R Specify a code from below for [1]. (e.g. 17PE-56-R) [1] INPUT Voltage 1: 0 – 110 V AC 2: 0 – 220 V AC 5: 0 – 150 V AC 6: 0 - 300 V AC OUTPUT Voltage 6: 1 – 5 V DC (Load resistance 2000 Ω min.) AUXILIARY POWER SUPPLY DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) GENERAL SPECIFICATIONS Construction: Rack-mounted; terminal access via screw terminals on the front and connector on the rear; terminal cover provided Connection Input: M3.5 screw terminals (torque 0.8 N·m) Output: Connector Auxiliary power: Supplied from connector Screw terminal: Nickel-plated steel Isolation: Input to output to auxiliary power Input waveform: Up to 15 % of 3rd harmonic content Overrange output: 0 to 120 % Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (front) INPUT SPECIFICATIONS Frequency: 50 or 60 Hz Input burden: 0.5 VA Overload capacity: 200 % of rating for 10 sec., 120 % continuous Operational range: 0 – 120 % of rating OUTPUT SPECIFICATIONS 150 300V0
- Operation Diagram (example) OUT IN INSTALLATION Auxiliary power supply Current consumption: Approx. 35 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 40 to 85 % RH (non-condensing) Mounting: Standard Rack 17BXE Weight: 150 g (0.33 lb) PERFORMANCE in percentage of span Accuracy: ±0.4 % (at 23°C ±10°C or 73.4°F ±18°F, 45 – 65 Hz) Response time: ≤ 1 sec. (0 – 100 % ±1 %) Ripple: 1 %p-p max. Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (output to auxiliary power)
MODEL: 17PE http://www.m-system.co.jp/ 17PE SPECIFICATIONS ES-2938 Rev.0 Page 2/2
1500 V AC @ 1 minute (input to output or auxiliary power to
ground) CONNECTION DIAGRAM LOAD SOURCE V U v uFUSE FUSE VT OUTPUT AUXILIARY POWER CONNECTOR DIMENSIONS unit: mm (inch) 110 (4.33 ) 93 (3.66) 24 (.94) 7 (.28) 78 (3.07)32 (1.26) 8–M3.5 SCREW 7 (.28) 2–M3 SCREW TERMINAL ASSIGNMENTS 1 2 3 4 7 8 5 6 Specifications are subject to change without notice.