DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

http://www.ddknet.co.jp ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. ・17LE series are connected to a circuit by through hole DIP solder termination style mounting on PCB and fastened on the bracket by stud or jack socket. ・Number of contact : 9, 15, 25 and 37 ・Studs and hex nuts are available to fasten with mating half. This connection with PCB and metal shell is grounding and improving the resistance against EMI. ・The metal shell is in Nickel plating. The pin connectors of metal shell are beat-finished. ・4 types of ground tabs are mountable on the bracket for protection against EMI. 3P)4 $PNQMJBOU 3P)43P)4 $PNQMJBOU$PNQMJBOU D-Sub Right Angle DIP Termination 17LE Series 17LE-13150-27-FA 17LE-23250-27-FA 17LE-13370-27-FA 160707

FEATURES

Rated Voltage 300V AC (r.m.s.) Rated Current 5A / Contact Dielectric Withstanding Voltage 1000V AC (r.m.s.) / 1 minute Insulation Resistance 1000M Ω (min.) at 500V DC Contact Resistance 15m Ω (max.) Operating Temperature -25℃〜 85℃ SPECIFICATIONS Item Material / Finish Insulator Polyamide Resin (UL94V-0） / Black Shell Steel / Ni Plating Contact Copper Alloy / Contact Area: Au(0.4 μ m) over Ni Plating Tail Area: Sn-Ag Plating over Ni Plating Eyelet Brass / Ni Plating MATERIAL / FINISH

Unit：mm17LE Series http://www.ddknet.co.jp ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 17LE-13xx0-27(D3xx)-FA Socket Connector ○ Right Angle Socket Connectors 17LE-13250-27(D3AB)-FA Contact Tail Style 2: Right Angle DIP Termination Key Position 0: No Key Contact Plating 7: Contact Area: Au(0.4 μ m) over Ni Plating Tail Area: Sn-Ag over Ni Plating FA: Lead Free Mating Style １: Socket Connector Shell Plating ３: Ni Plating Number of Contact 9, 15, 25, 37 Deviation ※ Regarding the combinations of grounding tab, stud and jack socket, please refer to the list on page 6. No Digit: Connector Only （D3AB) Grounding Tab (Please refer to page 4.) No Digit: Less Grounding Tab B：with Ground Tab 17L-004B C：with Board Lock 17L-004C-FA D：with Ground Tab 17L-004D H/K: with Board Lock 17L-004E-FA ※ Ground tab B and D can not be combined with stud. Thread Size A：M2.6×0.45 B：M3×0.5 C：＃ 4-40UNC 2: with Stud Type1 (17L-002 □ ) 3: with Jack Socket Type 2 (17L-003 □ 1) 4: with Jack Socket Type 3 (17L-003 □ 3) ・□ : Thread Type A, B, C Number of Contact A B C D E F G H J A B n DDK n 6.25 12.5 C 0.7 No.n Contact 7.8 2.84 0.30.5 6.1 9.6 12.6 (E) Section Y－Y 2.84 (9.6) 0.8 2.84 0.5 2.28 6.4 3.2 Fixed with adhesive part Contact No. Thread Size （Refer to part number code） M3×0.5 Thread(Ｂ) D Y Y X X M3×0.5 Thread No.1 Contact (n+1)/2 Contact (n+3)/2 Contact n+3 n+1 PCB Mounting Dimensions （Applicable PCB Thickness:ｔ ＝１． ６±0.19） Panel Mounting Dimensions(Rear Mounting) E Ｊ +0.3 (6.25)(6.25) 4-R2.5 10.0 +0.3 R H±0.3 B±0.1 6.5±0.2 （View from mounting pattern side) G±0.1 F±0.1 F±0.1 B±0.1 D±0.1 2-φ3.2±0.1 Through Hole n-φ1.0±0.1 Through Hole2.84±0.1

Unit：mm17LE Series http://www.ddknet.co.jp ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. ○ Right Angle Plug Connectors 17LE-23250-27(D3AB)-FA Connector Type 2: Plug Connector 17LE-23xx0-27(D3xx)-FA Plug Connector Number of Contact A B C D E F G H J FA: Lead Free A B n C D (E) 8.25 12.5 2.84 No.n Contact 6.253.2 n+3 DDK １n+1 ｎ Contact No. 0.5 2.84 (9.6) 0.8 2.84 5.9 0.5 12.6 9.6 0.3 (B) 2.28 Y Y Thread Size （Refer to part number code.） XX Fixed with adhesive part Ｍ３×0.5 Thread 0.7 SectionY－Y 6.4 Ｍ３×0.5 Thread No.1 Contact (n+3)/2 Contact (n+1)/2 Contact Panel Mounting Dimensions(Rrear Mounting) Ｊ +0.3 (6.25)(6.25) 4-R2.5 10.0 +0.3 R H±0.3 B±0.1 6.5±0.2 PCB Mounting Dimensions （Applicable PCB Thickness ： ｔ ＝１． ６±0.19） E （View from mounting pattern side） G±0.1 F±0.1 F±0.1 B±0.1 D±0.1 2-φ3.2±0.1 Through Hole n-φ1.0±0.1 Through Hole 2.84±0.1 Shell Plating ３: Ni Plating Number of Contact 9, 15, 25, 37 Key Position 0: No Key Contact Tail Style 2: Right Angle DIP Termination Contact Plating 7: Contact Area: Au(0.4 μ m) over Ni Plating Tail Area: Sn-Ag over Ni Plating Deviation ※ Regarding the combinations of grounding tab, stud and jack socket, please refer to the list on page 6. No Digit: Connector Only （D3AB) Grounding Tab (Please refer to page 4.) No Digit: Less Grounding Tab B：with Ground Tab 17L-004B C：with Board Lock 17L-004C-FA D：with Ground Tab 17L-004D H/K: with Board Lock 17L-004E-FA ※ Ground tab B and D can not be combined with stud. Thread Size A：M2.6×0.45 B：M3×0.5 C：＃ 4-40UNC 2: with Stud Type1 (17L-002 □ ) 3: with Jack Socket Type 2 (17L-003 □ 1) 4: with Jack Socket Type 3 (17L-003 □ 3) ・□ : Thread Type A, B, C

Unit：mm17LE Series http://www.ddknet.co.jp ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. ○ Ground Tab Ground Tab for 17LE Ground tab enables 17LE series to ground to PCB easily. Ground Tab with Tapping Hole Part Number : 17L-004B Material / Finish: Steel / Ni Plating ※ Combination of stud 17L-002 □ is not available. Ground Tab with Board Lock Part Number : 17L-004C-FA Material / Finish: Copper Alloy / Sn-Ag Plating Ground Tab with Thrugh Hole Part Number : 17L-004D Material / Finish: Steel / Ni Plating ※ Combination of stud 17L-002 □ is not available. Thread M3×0.5 φ 3.2 Hole φ 3.6 Hole Ground Tab with Board Lock Part Number : 17L-004E-FA Material / Finish: Copper Alloy / Sn-Ag Plating Thread M3x0.5

Unit：mm17LE Series http://www.ddknet.co.jp ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. ○ Mounting on Panel and PCB 6.16.5 M3×0.5 Thread 7.8 4.8 13.0 min. K min. 4-R1.0 11.4 min. L min. 4-R3.4 10° B±0.1 2-φ3.2±0.1 6.5 ±0.2 B±0.1 10.0 +0.3 +0.3 H ±0.3 4-R2.5 R J Connector Jack SocketHex Nut Connector Stud Panel Pan-head Screw Connector Jack Socket Hex Nut M3×0.5 Thread 6.16.5 M3×0.5 Thread 7.8 4.8 13.0 min. K min. 4-R1.0 11.4 min. L min. 4-R3.4 10° B±0.1 2-φ3.2±0.1 6.5 ±0.2 B±0.1 10.0 +0.3 +0.3 H ±0.3 4-R2.5 R J Connector Jack SocketHex Nut Connector Stud Panel Pan-head Screw Connector Jack Socket Hex Nut M3×0.5 Thread 6.16.5 M3×0.5 Thread 7.8 4.8 13.0 min. K min. 4-R1.0 11.4 min. L min. 4-R3.4 10° B±0.1 2-φ3.2±0.1 6.5 ±0.2 B±0.1 10.0 +0.3 +0.3 H ±0.3 4-R2.5 R J Connector Jack SocketHex Nut Connector Stud Panel Pan-head Screw Connector Jack Socket Hex Nut M3×0.5 Thread Type 1 Type 2 Type 3 6.16.5 M3×0.5 Thread 7.8 4.8 13.0 min. K min. 4-R1.0 11.4 min. L min. 4-R3.4 10° B±0.1 2-φ3.2±0.1 6.5 ±0.2 B±0.1 10.0 +0.3 +0.3 H ±0.3 4-R2.5 R J Connector Jack SocketHex Nut Connector Stud Panel Pan-head Screw Connector Jack Socket Hex Nut M3×0.5 Thread 6.16.5 M3×0.5 Thread 7.8 4.8 13.0 min. K min. 4-R1.0 11.4 min. L min. 4-R3.4 10° B±0.1 2-φ3.2±0.1 6.5 ±0.2 B±0.1 10.0 +0.3 +0.3 H ±0.3 4-R2.5 R J Connector Jack SocketHex Nut Connector Stud Panel Pan-head Screw Connector Jack Socket Hex Nut M3×0.5 Thread Number of Contact B H J K L 6.16.5 M3×0.5 Thread 7.8 4.8 13.0 min. K min. 4-R1.0 11.4 min. L min. 4-R3.4 10° B±0.1 2-φ3.2±0.1 6.5 ±0.2 B±0.1 10.0 +0.3 +0.3 H ±0.3 4-R2.5 R J Connector Jack SocketHex Nut Connector Stud Panel Pan-head Screw Connector Jack Socket Hex Nut M3×0.5 Thread Stud (17L-002 □ ) Jack Socket (17L-003 □ 1) Jack Socket (17L-003 □ 3) Panel MountingDimensions（□ : Thread Size) 6.16.5 M3×0.5 Thread 7.8 4.8 13.0 min. K min. 4-R1.0 11.4 min. L min. 4-R3.4 10° B±0.1 2-φ3.2±0.1 6.5 ±0.2 B±0.1 10.0 +0.3 +0.3 H ±0.3 4-R2.5 R J Connector Jack SocketHex Nut Connector Stud Panel Pan-head Screw Connector Jack Socket Hex Nut M3×0.5 Thread 6.16.5 M3×0.5 Thread 7.8 4.8 13.0 min. K min. 4-R1.0 11.4 min. L min. 4-R3.4 10° B±0.1 2-φ3.2±0.1 6.5 ±0.2 B±0.1 10.0 +0.3 +0.3 H ±0.3 4-R2.5 R J Connector Jack SocketHex Nut Connector Stud Panel Pan-head Screw Connector Jack Socket Hex Nut M3×0.5 Thread □ : Thread SIze Ａ : M2.6×0.45 Ｂ : M3×0.5 Ｃ : #4-40UNC 6.16.5 M3×0.5 Thread 7.8 4.8 13.0 min. K min. 4-R1.0 11.4 min. L min. 4-R3.4 10° B±0.1 2-φ3.2±0.1 6.5 ±0.2 B±0.1 10.0 +0.3 +0.3 H ±0.3 4-R2.5 R J Connector Jack SocketHex Nut Connector Stud Panel Pan-head Screw Connector Jack Socket Hex Nut M3×0.5 Thread Applicable PCB Thickness 1.6±0.19 Ground Tab (Board Lock) Ground Tab Ground Tab Screw (not attached) Applicable PCB Thickness 1.6±0.19 Ground Tab (Board Lock) Ground Tab Ground Tab Screw (not attached) Applicable PCB Thickness 1.6±0.19 Ground Tab (Board Lock) Ground Tab Ground Tab Screw (not attached) Number of Contact B D E F G PCB Mounting Dimensions （Applicable PCB Thickness:ｔ ＝１． ６±0.19） Panel Mounting Dimensions(Rear Mounting) E Ｊ +0.3 (6.25)(6.25) 4-R2.5 10.0 +0.3 R H±0.3 B±0.1 6.5±0.2 （View from mounting pattern side) G±0.1 F±0.1 F±0.1 B±0.1 D±0.1 2-φ3.2±0.1 Through Hole n-φ1.0±0.1 Through Hole2.84±0.1 ※ Connector can not be fastened on the panel. ※ Connector can not be fastened on the panel. ※ Connector can be fastened on the panel. （Panel Thickness：0.8〜 1.3）

Unit：mm17LE Series http://www.ddknet.co.jp ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. ○ 17LE Series Mounting Accessories Deviation ※ ASSEMBLED: The mounting accessories are assembled with connector. ATTACHED: The mounting accessories are attached separately. 17LE-13 □□ 0-27-FA 17LE-23 □□ 0-27-FA None None 17LE- □ 3 □□ 0-27-FA Press in ground tab 17L-004E-FA Connector can not be fastened on the panel. Stud 17L-002 □ and pan- head screw(L=6) are ASSEMBLED. Ground tab 17L-004C-FA is fastened by stud 17L-002 □ and pan- head screw (L=7). 17LE-□3□□0-27(D2□C)-FA Connector can not be fastened on the panel. To prevent loosening, screws are locked by adhesive. Jack socket 17L-003 □ 1 and hex nut(M3) are ASSEMBLED. Press in ground tab 17L-004B and jack socket 17L-003 □ 1 is ASSEMBLED. Press in ground tab 17L-004D and jack socket 17L-003 □ 1 is ASSEMBLED. 17LE-□3□□0-27(D3□D)-FA Press in ground tab 17L-004E-FA and jack socket 17L-003 □ 1 is ASSEMBLED. Connector can be fastened on the panel. Panel thickness: 1.3 max. Jack socket 17L-003 □ 3 and hex nut(M3) are ASSEMBLED. Press in ground tab 17L-004B and jack socket 17L-003 □ 3 is ASSEMBLED. Press in ground tab 17L-004D and jack socket 17L-003 □ 3 is ASSEMBLED. Press in ground tab 17L-004E-FA and jack socket 17L-003 □ 3 is ASSEMBLED. 17L-002 □ 17L-003 □ 1 17L-003 □ 3 Stud Jack Socket Part Number □ : Thread Size (Stud) A：M2.6×0.45 B：M3×0.5 C：＃ 4-40UNC t=1.6 M3×0.5t=1.6 6.1 6.5 M3×0.5 φ3.2 Hole φ3.6 Hole t=0.6 M3×0.5 t=0.8 4.8 7.8 t=1.6 M3×0.5t=1.6 6.1 6.5 M3×0.5 φ3.2 Hole φ3.6 Hole t=0.6 M3×0.5 t=0.8 4.8 7.8 Ground Tab Part Number Panel Mounting Operation Type 1 Type 2 Type 3 17L-004B 17L-004D 17L-004C-FA 17L-004E-FA t=1.6 M3×0.5t=1.6 6.1 6.5 M3×0.5 φ3.2 Hole φ3.6 Hole t=0.6 M3×0.5 t=0.8 4.8 7.8 t=1.6 M3×0.5t=1.6 6.1 6.5 M3×0.5 φ3.2 Hole φ3.6 Hole t=0.6 M3×0.5 t=0.8 4.8 7.8 t=1.6 M3×0.5t=1.6 6.1 6.5 M3×0.5 φ3.2 Hole φ3.6 Hole t=0.6 M3×0.5 t=0.8 4.8 7.8 t=1.6 M3×0.5t=1.6 6.1 6.5 M3×0.5 φ3.2 Hole φ3.6 Hole t=0.6 M3×0.5 t=0.8 4.8 7.8 t=1.6 M3×0.5t=1.6 6.1 6.5 M3×0.5 φ3.2 Hole φ3.6 Hole t=0.6 M3×0.5 t=0.8 4.8 7.8 t=1.6 M3×0.5t=1.6 6.1 6.5 M3×0.5 φ3.2 Hole φ3.6 Hole t=0.6 M3×0.5 t=0.8 4.8 7.8 t=1.6 M3×0.5t=1.6 6.1 6.5 M3×0.5 φ3.2 Hole φ3.6 Hole t=0.6 M3×0.5 t=0.8 4.8 7.8 t=1.6 M3×0.5t=1.6 6.1 6.5 M3×0.5 φ3.2 Hole φ3.6 Hole t=0.6 M3×0.5 t=0.8 4.8 7.8 Recommended ※ Above list shows combinations of ground tab, stud and jack socket. The deviation is given in parentesis in each sections. Slanting line means "not available". Regarding the detail, please contact our sales. t=1.6 M3×0.5t=1.6 6.1 6.5 M3×0.5 φ3.2 Hole φ3.6 Hole t=0.6 M3×0.5 t=0.8 4.8 7.8 t=1.6 M3×0.5t=1.6 6.1 6.5 M3×0.5 φ3.2 Hole φ3.6 Hole t=0.6 M3×0.5 t=0.8 4.8 7.8