17937 EKTOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Quadro Professional Bunker IP65, 3000-6500K, DALI IP65 weatherproof rating and Vandal-proof IK08 rating Power monitoring (DT51) LED Lifetime >120,000 hours 12 years design life at max. ambient DALI (IEC62386) Flicker-free dimming controlled by IEC 62386-102 Power monitoring (DT51) reported over IEC 62386-252 IEC 62386 over IEC 62386-104 Flicker-free dimming controlled by DALI Emergency and non-emergency models Wireless meshing system
ORDERING INFORMATION
Description Ektor Lynk Quadro LED bunker IP65 - PRO w/wireless Driver Type Wireless (IEC62386-104) with DT8 Dimmable Wireless ~ Includes Wireless Driver with full support for DT6 and DT8-tc allowing flicker free dimming and colour control with compliant IEC62386-104 Application controllers. Item Code EV-QUADRO-PRO-LK MECHANICAL Body Material Polycarbonate Diffuser Material Polycarbonate IK Rating IK08 Installation Type Surface mount IP Rating IP65 ELECTRICAL Electrical Rating Class I Input Frequency 50 Hz Input voltage 230Vac In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6% Maximum Wattage 25 W Power Factor 0.95 Standby Power 0.3 W Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge. Switch Type Inbuilt Mains Rated DALI Switch A Terminal input has been provided to allow the wiring of a Main rated switch input. This input can be programmed to switch any controlled area when using a DALI-2 compliant control system. This input supports IEC62386-301 (momentary or rocker switches), IEC62386-302 (on /off switches) and IEC62386-303 (mains rated sensor inputs). Working Temp Range 0 to 40 °C LAMP Macadam Steps (SDCM) 3-step MacAdam Ellipse CCT Configuration TUNEABLE WHITE Full support for DALI-2 DT8 has been provided which allows White colour control on a compliant DALI-2 control system. This function can be used to set a desired colour or to transition between colours depending on the time of day. Colour Rendering Index (CRI) >84 Lamp/LED Current 650 mA Lamp/LED voltage 36 V LED LIFETIME LED Lifetime >120000 hrs This is the Reported LED Lifetime in Hours based on TM-21. Ektor does not list the projected or calculated LED lifetime, which is normally longer as TM-21 Addendum B explicitly states "The Calculated and Projected Lp(Dk) are not to be reported". This Lifetime refers to the life of a single LED however the system life is longer since the probability and binomial distribution of all LEDs in the system means that the average led is performing above the specification and compensates for the LEDs falling below. Ambient Temp (°C) 25 °C 40 °C L90B10 43000 hrs 43000 hrs This rating defines the performance of the led within its lifetime. L relates to lumen depreciation, where the proceeding number gives the resultant lumen output at the end of it reported lifetime. L70, would mean 30% lumen depreciation which means 70% of its initial output and is tested accordingly to TM-21. The B part refers to failures, which can be define as the percentage of LEDs which fall below the L value in the projected lifetime. A value of B10 refers to 10% failure and a value of B50 refers to 50% failure. After the defined lifetime, the system will reach the defined lumen depreciation and the average led failures is defined by the B rating. The B rating is defined in and tested to IEC62717. 1300 438 658 sales@evolt.com.au ektor.com.au © 2025 Evolt Generated on 4th of February 2025 08:54:41 - Page 1
TM-21 Test Hours 20000 hrs COLOUR TEMPERATURE CCT 3000 to 6500 CCT Colour Tunable White Luminaire Lumens >3200 lm All photometric data has a tolerance of ±10%. Luminaire lumens refers to the exit lumens or delivered lumens from the luminaire. DRIVER Dimmable Yes Driver Included Yes Integrated Driver No Driver Type Wireless (IEC62386-104) with DT8 Dimmable Wireless ~ Includes Wireless Driver with full support for DT6 and DT8-tc allowing flicker free dimming and colour control with compliant IEC62386-104 Application controllers. Power Monitoring DALI Device type 51 power monitoring Inbuilt DALI-2 support for Device type 51 - Power monitoring for use with DALI-2 compliant control systems which allows the reporting of the products total power consumption for power aggregation and measurements. Wiring Type Re-wireable terminal block (6 pin) PSTLM 0.08 Short Term Light Modulation (PstLM): The requirement is that PstLM should be less than or equal to 1.0. This metric measures the short-term flicker severity and ensures that flicker is not perceptible or is at a level that does not cause discomfort or health issues. SVM 0.018 Stroboscopic Visibility Measure (SVM): The requirement for SVM is that it should be less than or equal to 0.4. The SVM metric assesses the visibility of the stroboscopic effect, which can make moving objects appear to be stationary or moving in discrete steps, thus ensuring that this effect is minimized in lighting environments to prevent visual discomfort and safety hazards. COMPLIANCE Product Design Life 12 years The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use. Standards AS/NZS 60598.1 AS/NZS 60598.2.1 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 AS/NZS 4268 WARRANTY Commercial Use Warranty 5 RTB (Total 5 Years) VIP Warranty 2 Onsite, 3 RTB (Total 5 Years) VIP warranty is available to registered users and is subjected to additional terms and conditions. DIMENSIONS Product Height 102 mm Product Length 275 mm Product Width 275 mm LINE DRAWINGS EV/QUADRO/PRO PHOTOMETRICS EV/QUADRO/PRO (4000K) Powered by TCPDF (www.tcpdf.org) Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 4th of February 2025 08:54:41 - Page 2