173950336 WURTH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 36

Technical content

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 1/36 4.75V – 36V / 500mA / 3.3V or 5V Output

DESCRIPTION

The FDSM series of the MagI3C Power Module family is a fixed output voltage, fully integrated DC-DC power supply including the switching regulator, inductor and capacitors all in one package. The module requires only an input capacitor and no other external components for operation, reducing design effort and complexity to a minimum. The FDSM ensures fast time to market and low development costs. It is pin compatible with the common 78xx linear regulator series. The high efficiency reduces the power dissipation and in many cases a heatsink and assembly parts are unnecessary. 12V to 3.3V conversion achieves up to 86% efficiency. 12V to 5V conversion achieves up to 90% efficiency. The standard THT (10.16 x 11.6 x 7.55mm) package allows for easy assembly. TYPICAL APPLICATIONS  Point-of-Load DC-DC applications from 5V, 9V, 12V, 15V, 18V and 24V industrial rails  Replacement for linear regulator  Interface and microcontroller supply  General purpose TYPICAL CIRCUIT DIAGRAM

FEATURES

  • Peak efficiency up to 95%
  • Current capability up to 500mA
  • Input voltage range: 4.75V to 36V
  • Output voltage: 3.3V or 5V
  • Output voltage accuracy: ± 4% max
  • No minimum load required
  • Partially integrated input and output capacitors
  • Integrated inductor
  • Low output voltage ripple (< 10mVpp)
  • Fixed 710kHz switching frequency
  • Current mode control
  • Pulse skipping for high efficiency at light loads
  • Internal soft-start
  • Thermal shutdown
  • Short circuit protection
  • Cycle by cycle current limit
  • Pin compatible with the FDSM power modules series
  • Operating ambient temperature range: -40°C to 85°C
  • RoHS & REACh compliant
  • Case and potting material UL 94 Class V0 (flammability testing) certified
  • Complies with EN55032 class B conducted and radiated emissions standard VIN GND VOUT Module VIN GND GND VOUT 1 3 CIN

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 2/36 1 2 3 VIN GND VOUT PACKAGE MARKING DESCRIPTION MARKING DESCRIPTION WE Würth Elektronik tradename

78 Indicates the compatibility with 78xx linear regulator

VV Output voltage (3.3V or 5V) PIN DESCRIPTION SYMBOL PIN TYPE DESCRIPTION VIN 1 Power The supply input pin is a terminal for an unregulated input voltage source. It is recommended to use a 10µF/50V input capacitor. GND 2 Power Ground reference for VIN and VOUT VOUT 3 Power Regulated output voltage. There is no need for an external output capacitor.

ORDERING INFORMATION

ORDER CODE SPECIFICATIONS PACKAGE PACKAGING UNIT 173950336 36V / 500mA / 3.3Vout version SIP-3 Tube with 43 pieces 173950536 36V / 500mA / 5Vout version SIP-3 Tube with 43 pieces 17800FDSM 4.75 to 42VIN / 3.3 & 5VOUT Eval Board 1

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 3/36 PIN COMPATIBLE FAMILY MEMBERS ORDER CODE SPECIFICATIONS PACKAGE PACKAGING UNIT 173950378 28V / 500mA / 3.3Vout version SIP-3 Tube with 42 pieces 173950578 28V / 500mA / 5Vout version SIP-3 Tube with 42 pieces 173010378 28V / 1A / 3.3Vout version SIP-3 Tube with 42 pieces 173010578 28V / 1A / 5Vout version SIP-3 Tube with 42 pieces 173010342 42V / 1A / 3.3Vout version SIP-3 Tube with 42 pieces 173010542 42V / 1A / 5Vout version SIP-3 Tube with 42 pieces SALES INFORMATION SALES CONTACTS Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1

74638 Waldenburg

Tel. +49 (0) 7942 945 0 www.we-online.com/powermodules Technical support: powermodules@we-online.com

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 4/36 ABSOLUTE MAXIMUM RATINGS Caution: Exceeding the listed absolute maximum ratings may affect the device negatively and may cause permanent damage. These are stress ratings only, which do not imply functional operation of the device at these or any other condition beyond those indicated under “Operation Conditions”. SYMBOL PARAMETER LIMITS UNIT MIN (1) MAX (1) VIN Input pin voltage -0.3 45 V VOUT Output pin voltage -1 45 V Tstorage Assembled, non-operating storage temperature -55 125 °C VESD ESD Voltage (Human Body Model), according to EN61000-4-2 (2) - ±4000 V OPERATING CONDITIONS Operating conditions are conditions under which operation of the device is intended to be functional. All values are referenced to GND. MIN and MAX limits are valid for the recommended ambient temperature range of -40°C to 85°C. Typical values represent statistically the utmost probability at the following conditions: VIN = 4.75V to 36V (173950336), VIN = 6.5V to 36V (173950536), IOUT = 500mA(5) , TA = 25°C, unless otherwise specified. SYMBOL PARAMETER MIN (1) TYP (3) MAX (1) UNIT VIN Input voltage (173950336) 4.75 - 36 V VIN Input voltage (173950536) 6.5 - 36 V TA Ambient temperature range -40 - +85 (4) °C IOUT Nominal output current - - 500 mA COUT MAX Maximum output capacitor - - 680 µF

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 5/36 THERMAL SPECIFICATIONS SYMBOL PARAMETER TYP (3) UNIT ӨCA Case-to-ambient thermal resistance (5) 70 K/W Tcase max Maximum case temperature (5) 100 °C TSD Thermal shutdown, junction temperature rising 170 °C ELECTRICAL SPECIFICATIONS MIN and MAX limits are valid for the recommended ambient temperature range of -40°C to 85°C. Typical values represent statistically the utmost probability at the following conditions: VIN = 4.75V to 36V (173950336), VIN = 6.5V to 36V (173950536), IOUT = 500mA(5) , TA = 25°C, unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS MIN (1) TYP (3) MAX (1) UNIT Output current ICL Current limit threshold VIN = 24V - 1.5 - A Output voltage VOUT Regulated output voltage 173950336 - 3.3 - V Regulated output voltage 173950536 - 5 - V Line regulation IOUT = 500mA - ±0.2 ±0.4 % Load regulation 10% to 100% Load - ±0.6 - % Total output voltage variation TA = 25°C, IOUT = 500mA - ±2 ±4 % Output voltage ripple VOUT = 3.3V, IOUT = 500mA COUT = 22µF X5R, 20MHz BWL - 6 - mVpp VOUT = 5V, IOUT = 500mA COUT = 22µF X5R, 20MHz BWL - 5 - mVpp Switching frequency fSW Switching frequency VIN = 12V, Continuous Conduction Mode (CCM) 550 710 850 kHz Input current IIN No load input current Operating, switching - 0.2 1.5 mA Efficiency η Efficiency VIN = 4.75V, VOUT = 3.3V - 92 - % VIN = 36V, VOUT = 3.3V - 78 - % VIN = 6.5V, VOUT = 5V - 95 - % VIN = 36V, VOUT = 5V - 84 - % RELIABILITY SYMBOL PARAMETER TEST CONDITIONS TYP (3) UNIT MTBF (6) Mean Time Between Failures MIL-HDBK-217F, +25°C 2000 · 103 h

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 6/36 RoHS, REACh RoHS Directive Directive 2011/65/EU of the European Parliament and the Council of June 8th, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. REACh Directive Directive 1907/2006/EU of the European Parliament and the Council of June 1st, 2007 regarding the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACh) PACKAGE SPECIFICATIONS ITEM PARAMETER TYP (3) UNIT Case Black flame-retardant and heat-resistant plastic (UL94 V-0) - - Potting material Silicone, UL94V-0 - - Weight 1.8 g NOTES (1) Min and Max limits are 100% production tested at 25°C. Limits over the operating temperature range are guaranteed through correlation using Statistical Quality Control (SQC) methods. (2) The human body model is a 100pF capacitor discharged through a 1.5 kΩ resistor into each pin. Test method is per JESD- 22-114. (3) Typical numbers are valid at 25°C ambient temperature and represent statistically the utmost probability assuming the Gaussian distribution. (4) Depending on load current, see derating diagram. (5) Measured without heatsink, no airflow. (6) MIL-HDBK-217F; GB Ground, Benign: Non mobile, temperature and humidity controlled environments readily accessible to maintenance; includes laboratory instruments and test equipment, medical electronic equipment, business and scientific computer complexes, and missiles and support equipment in ground silos.

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 7/36 TYPICAL PERFORMANCE CURVES If not otherwise specified, the following conditions apply: VIN = 24V; VOUT = 3.3V (173950336) & 5V (173950536); IOUT = 500mA; TAMB = 25°C. RADIATED AND CONDUCTED EMISSIONS (WITH EMI INPUT FILTER) The 173950336 & 173950536 power modules are tested with standard EMC configuration (1m wire between the module and the load) to give more realistic information about implementation in the applications. The test setup is based on CISPR16 with the limit values CISPR32. FILTER SETUP Input wire length:  Radiated Emission: 160cm (80cm Horizontal + 80cm Vertical)  Conducted Emission: 80cm Output wire length  Radiated & Conducted Emission: 1m

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 8/36 3.3VOUT: 30 100 1000 Frequency [MHz] Radiated Emissions [dBµV/m] Radiated Emissions 173950336 (3m Antenna Distance ) VIN = 24V, VOUT = 3.3V, ILOAD = 0.5A with input filter CF & CIN = 10µF (875115852001), LF = 1µH (7447730) Horizontal Vertical EN55032 Class A limit EN55032 Class B limit 0.15 1 10 Frequency [MHz] Conducted Emissions [dBµV] Conducted Emissions 173950336 VIN = 24V, VOUT = 3.3V, ILOAD = 0.5A with input filter CF & CIN = 10µF (875115852001), LF = 1µH (7447730) Average Quasi peak EN55032 Class B Quasi Peak limit EN55032 Class B Average limit -10 300.5

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 9/36 5VOUT: 30 100 1000 Frequency [MHz] Radiated Emissions [dBµV/m] Radiated Emissions 173950536 (3m Antenna Distance ) VIN = 24V, VOUT = 5V, ILOAD = 0.5A with input filter CF & CIN = 10µF (875115852001), LF = 1µH (7447730) Horizontal Vertical EN55032 Class A limit EN55032 Class B limit 0.15 1 10 Frequency [MHz] Conducted Emissions [dBµV] Conducted Emissions 173950536 VIN = 24V, VOUT = 5V, ILOAD = 0.5A with input filter CF & CIN = 10µF (875115852001), LF = 1µH (7447730) Average Quasi peak EN55032 Class B Quasi Peak limit EN55032 Class B Average limit -10 300.5

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 10/36 EFFICIENCY 100 Efficiency [%] Output Current [A] 173950336 VOUT = 3.3V, fSW =710kHz, TA = 25 C Vin = 4.75 Vin = 9V Vin = 12V Vin = 15V Vin = 18V Vin = 24V 100 Efficiency [%] Output Current [A] 173950336 VOUT = 3.3V, fSW =710kHz, TA = 85 C Vin = 4.75 Vin = 9V Vin = 12V Vin = 15V Vin = 18V Vin = 24V

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 11/36 EFFICIENCY 100 Efficiency [%] Output Current [A]

173950536 VOUT = 5V, fSW =710kHz, TA = 25 C

Vin = 6.5V Vin = 9V Vin = 12V Vin = 15V Vin = 18V Vin = 24V 100 Efficiency [%] Output Current [A]

173950536 VOUT = 5V, fSW =710kHz, TA = 85 C

Vin = 6.5V Vin = 9V Vin = 12V Vin = 15V Vin = 18V Vin = 24V

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 12/36 POWER DISSIPATION 0.1 0.2 0.3 0.4 Power Dissipation [W] Output Current [A] 173950336 VOUT = 3.3V, fSW =710kHz, TA = 25 C Vin = 4.75 Vin = 9V Vin = 12V Vin = 15V Vin = 18V Vin = 24V 0.1 0.2 0.3 0.4 Power Dissipation [W] Output Current [A] 173950336 VOUT = 3.3V, fSW =710kHz, TA = 85 C Vin = 4.75V Vin = 9V Vin = 12V Vin = 15V Vin = 18V Vin = 24V

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 13/36 POWER DISSIPATION 0.1 0.2 0.3 0.4 0.5 Power Dissipation [W] Output Current [A] Vin = 6.5V Vin = 9V Vin = 12V Vin = 15V Vin = 18V Vin = 24V 0.1 0.2 0.3 0.4 0.5 Power Dissipation [W] Output Current [A] Vin = 6.5V Vin = 9V Vin = 12V Vin = 15V Vin = 18V Vin = 24V

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 14/36 OUTPUT POWER DERATING 100 120 0 10 20 30 40 50 60 70 80 90 100 Output Power [%] Ambient Temperature [ C] 173950x36 Output Power Thermal Derating VIN = 24V, IOUT = 500mA & fSW = 710kHz 71 C

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 15/36 LINE REGULATION 3.298 3.299 3.3 3.301 3.302 3.303 3.304 3.305 3.306 3.307 3.308 4 8 12 16 20 24 28 32 36 Output Voltage [V] Input Voltage [V] 173950336 Line Regulation V OUT = 3.3V, TA = 25 C 10% Load 100% Load 3.306 3.308 3.31 3.312 3.314 3.316 3.318 3.32 3.322 4 8 12 16 20 24 28 32 36 Output Voltage [V] Input Voltage [V] 173950336 Line Regulation V OUT = 3.3V, TA = 85 C 10% Load 100% Load

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 16/36 LINE REGULATION 4.990 4.995 5.000 5.005 5.010 5.015 5.020 6 12 18 24 30 36 Output Voltage [V] Input Voltage [V]

173950536 Line Regulation V OUT = 5V, TA = 25 C

10% Load 100% Load 5.010 5.015 5.020 5.025 5.030 5.035 5.040 6 12 18 24 30 36 Output Voltage [V] Input Voltage [V]

173950536 Line Regulation V OUT = 5V, TA = 85 C

10% Load 100% Load

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 17/36 LOAD REGULATION 3.298 3.3 3.302 3.304 3.306 3.308 3.31 3.312 Output Voltage [V] Output Current [A] 173950336 Load Regulation V OUT = 3.3V, TA = 25 C Vin = 9V Vin = 12V Vin = 15V Vin = 18V Vin = 24V 3.308 3.31 3.312 3.314 3.316 3.318 3.32 3.322 3.324 Output Voltage [V] Output Current [A] 173950336 Load Regulation V OUT = 3.3V, TA = 85 C Vin = 9V Vin = 12V Vin = 15V Vin = 18V Vin = 24V

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 18/36 LOAD REGULATION 5.005 5.01 5.015 5.02 5.025 5.03 5.035 5.04 5.045 5.05 Output Voltage [V] Output Current [A]

173950536 Load Regulation V OUT = 5V, TA = 25 C

Vin = 9V Vin = 12V Vin = 15V Vin = 18V Vin = 24V 5.025 5.03 5.035 5.04 5.045 5.05 5.055 Output Voltage [V] Output Current [A]

173950536 Load Regulation V OUT = 5V, TA = 85 C

Vin = 9V Vin = 12V Vin = 15V Vin = 18V Vin = 24V

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 19/36 BLOCK DIAGRAM VOUT PWM Controller Driver Protection Circuitry COUT VOUT VIN UVLO CIN VIN 22µH VREF GND 0.765V Power Module Error Amplifier GND CBoot CSS RFBT RFBB 1.1 µF 11 µF PGND PGND VIN CIRCUIT DESCRIPTION The MagI³C power modules 173950x36 are based on a non-synchronous step-down regulator with integrated MOSFET, free- wheeling diode, power inductor, input and output capacitors. The control scheme is based on a Current Mode (CM) regulation loop. The VOUT of the regulator is divided with the internal feedback resistor network and fed into the error amplifier, which compares this signal with the internal 0.765V reference. The error signal is amplified and controls the on-time of a fixed frequency pulse width generator. This signal drives the MOSFET. The Current Mode architecture features a constant frequency during load steps. Only the on-time is modulated. It is internally compensated and stable with low ESR output capacitors. No external compensation network is required. This architecture supports fast transient response and very small output voltage ripple values (< 10mV) are achieved.

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 20/36 OUTPUT VOLTAGE RIPPLE The output voltage ripple depends on several parameters . The figure below shows the VOUT ripple at full load and using a 22µF MLCC output capacitor. An output voltage ripple of around 5 - 6mV is measured under the conditions indicated. 3.310 3.320 3.330 3.340 3.350 3.360 0 5 10 15 20 25 30 35 40 Output Voltage [V] Time [µs] 173950336 Output Voltage Ripple, V IN = 24V, VOUT = 3.3V & IOUT = 500mA 6mV 5.020 5.025 5.030 5.035 5.040 5.045 5.050 0 5 10 15 20 25 30 35 40 Output Voltage [V] Time [µs]

173950536 Output Voltage Ripple, V IN = 24V, VOUT = 5V & IOUT = 500mA

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 21/36 LIGHT LOAD OPERATION Under light load operation, the device switch es from in Continuous Conduction Mode (C CM) to Discontinuous Conduction Mode (DCM). The load current where the transition between DCM and CCM takes place can be estimated using the following formula: IOUT(DCM)= VOUT∙(1-VOUT VIN 2∙fSW∙L (1) The following figures show the device working in CCM and DCM. 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 1 2 3 4 5 6 Inductor Current [I L] Time [µs] 173950x36 Inductor Ripple Current V IN = 24V & IOUT = 500mA CCM Operation 1.4µs 710kHz 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0 1 2 3 4 5 6 Inductor Current [I L] Time [µs] 173950x36 Inductor Ripple Current V IN = 24V & IOUT = 200mA CCM Operation 1.41µs 709kHz

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 22/36 If the load current is further reduced, the device decreases the switching frequency in order to limit the energy transferred to the output (to both capacitor and load) and therefore keeping the output voltage regulated. The frequency reduction is shown in the figures below. -0.1 0.0 0.1 0.2 0.3 0.4 0 1 2 3 4 5 6 Inductor Current [I L] Time [µs] 173950x36 Inductor Ripple Current V IN = 24V & IOUT = 50mA DCM Operation 1.46µs 685kHz -0.1 0.0 0.1 0.2 0.3 0 1 2 3 4 5 6 Inductor Current [I L] Time [µs] 173950x36 Inductor Ripple Current V IN = 24V & IOUT = 10mA DCM Operation 1.48µs 675kHz

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 23/36 SOFT-START In order to prevent the output voltage from overshooting during start-up, a soft-start is implemented. The soft-start is internally set and lasts around 4ms for both the 173950336 and 173950536. The figures below show the start-up behavior of the power module with 3.3V and 5V output voltage respectively. 0 4 8 12 16 20 24 VIN & VOUT [V] Time [ms] 173950336 Soft Start, V IN = 12V, VOUT = 3.3V & IOUT = 500mA Input Voltage Output Voltage Soft Start 0 4 8 12 16 20 24 VIN & VOUT [V] Time [ms]

173950536 Soft Start, V IN = 12V, VOUT = 5V & IOUT = 500mA

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 24/36 PROTECTIVE FEATURES Over temperature protection (OTP) Thermal protection helps prevent catastrophic failures due to accidental device overheating. The junction temperature of the MagI³C Power Module should not be allowed to exceed its maximum ratings. Thermal protection is implemented by an internal thermal shutdown circuit which activates at 170°C (typ.), causing the device to enter a low power standby state. In this state, the MOSFET remains off causing VOUT to fall. Thermal protection helps to prevent catastrophic failures from accidental device overheating. When the junction temperature falls back below 160° (hysteresis is implemented) VOUT rises smoothly and normal operation resumes. Short circuit protection (SCP) The short circuit protection is realized via cycle by cycle current monitoring. Recovery from short circuit protection mode occurs during the switching cycle following the removal of the short circuit condition. When the 173010x 36 recovers from a short circuit condition, the soft-start is not active. Therefore, an overshoot at output voltage can be observed (see figure below). Under short circuit condition, the input current is limited. 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Output Voltage [V] Time [s] 173950336 Short Circuit Protection, V IN = 24V, VOUT = 3.3V & IOUT = 500mA

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 25/36 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Output Voltage [V] Time [s]

173950536 Short Circuit Protection, V IN = 24V, VOUT = 5V & IOUT = 500mA

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 26/36 Over current protection (OCP) For protection ag ainst load faults, the 173010x36 incorporates cycle -by-cycle current monitoring. During an overcurrent condition the output current is limited a nd the output voltage drops . When the overcurrent condition is removed, the output voltage returns to the nominal voltage. 0.0 0.5 1.0 1.5 2.0 0.0 1.0 2.0 3.0 4.0 0 1 2 3 4 5 6 7 8 Output Current [A] Output Voltage [V] Time [s]

173950336 Overcurrent Protection, V IN = 24V, TA = 25 C

0.0 0.5 1.0 1.5 0.0 1.0 2.0 3.0 4.0 5.0 6.0 0 1 2 3 4 5 6 7 8 Output Current [A] Output Voltage [V] Time [s]

173950536 Overcurrent Protection, V IN = 24V, TA = 25 C

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 27/36 EVALUATION BOARD SCHEMATIC (17800FDSM v.1.0) VIN GND VOUT Module VIN Cf GND C1 C3 VOUT GND Optional input filter OptionalOptional Lf The 17950x36 partially integrates both the input and output capacitors. It is also recommended to use a 10µF input capacitor C2 for high impedance input wires or traces and 22µF output capacitor C3 for applications where a low output voltage ripple is required. The additional 100µF aluminum electrolytic capacitor C1 is mounted as termination of the supply line and provides a slight damping of possible oscillations of the series resonance circuit represented by the inductance of the supply line and the input capacitance. This capacitor also prevents voltage overshoot during start up. The additional MLCC C f is part of the input filter and is not mounted on the board. The inductor Lf is not mounted too (see recommended part number in the table below). A zero ohm resistor (R1) is mounted in parallel with L f. In case the input filter is placed, R1 must be removed and an appropriate Lf mounted. In case particular application requirements are demanding additional capacitance , the evaluation board gives the possibility to place a further capacitor at the output: C4 (surface mounted electrolytic). This capacitor allows fine tuning of load transient voltage response. Bill of Material Designator Description Quantity Order Code Manufacturer IC1 MagI3C Power Module (not mounted) 1 171950x36 Würth Elektronik C1 Aluminum electrolytic capacitor, ATG5 family, 100μF/50V 1 860010674014 Würth Elektronik C2 Al-Poly capacitor 10µF/63V (not mounted) optional 875115852001 Würth Elektronik C3 Ceramic chip capacitor (not mounted) optional Würth Elektronik C4 Surface mounted electrolytic, WCAP-PSLP 220µF/10V 1 875105244013 Würth Elektronik Cf Al-Poly capacitor 10µF/63V (not mounted) optional 875115852001 Würth Elektronik Lf Filter inductor, 1µH, PD2 (not mounted) optional 7447730 Würth Elektronik R1 SMD bridge 0Ω resistance 1

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 28/36 Filter suggestion for conducted EMI The input filter shown in the schematic below is recommended to achieve conducted compliance according to EN5 5032 CISPR32 Class B (see results on page 7). For radiated EMI the input filter is not necessary. It is only used to comply with the setup recommended in the norms. VIN Cf Input LC Filter RLoad 1m wireVIN GND VOUT Module GND Lf Bill of Material of the Input LC Filter (VIN = 24V, VOUT = 3.3V & 5V, IOUT = 500mA) Designator Description Order Code Manufacturer C2 Al-Poly capacitor 10µF/63V 875115852001 Würth Elektronik Cf Filter Al-Poly capacitor 10µF/63V 875115852001 Würth Elektronik Lf Filter inductor, 1µH, PD2 family, ISAT = 5.72A , IR = 4A 7447730 Würth Elektronik

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 29/36 Generating negative output voltage Many industrial applications require negative voltages. The 173950x36 can easily provide a negative voltage using the circuit shown below. VIN GND VOUT 1 2 3GND VOUT- 173950x36 CIN VIN GND 10µF COUT 22µF It is important to be aware that in this configuration the 173950x36 must withstand the sum of the input voltage and the absolute value of the output voltage (VIN + |VOUT|), instead of just the input voltage . This means that the maximum operating voltage should be limited to 36V - |VOUT| (e.g. if the 171950536 is used in this configuration, the input voltage should not exceed 31V). Moreover, the maximum output current of this co nfiguration is no longer 0.5 A, instead it must be reduced according to the below mentioned formula (see also the graph below): IOUT− = (1 − D) ∙ IOUT (1) where D is the duty cycle, in this case defined according to: D = |VOUT| VIN + |VOUT| (2) Starting Condition for generating negative output voltage: VIN_MIN = 4.75V (3.3VOUT) & 6.5V (5 VOUT)

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 30/36 Compared with a standard positive buck configuration, the negative output buck contains an additional critical loop (between VIN and VOUT), which needs an additional capacitor CIN, as shown in the circuit above. 0.1 0.2 0.3 0.4 0.5 0 5 10 15 20 25 30 35 Output Current [A] Input Voltage [V] Output Current of the Negative Output Configuration Vout = 3.3V Vout = 5V

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 31/36 Generating complementary output voltage Another common requirement in industrial application is to provide a complementary voltage (e.g. ±5V). The circuit below shows how this target can be achieved simply combining a 173950x36 used in a standard configuration (delivering a positive output voltage) with the above mentioned solution for negative voltages. VIN GND VOUT 1 2 GND VOUT- 173950x36 CIN VIN GND 10µF VIN VOUT GND 1 3 VOUT 173950x36 GND Complementary output voltage COUT 22µF COUT 22µF CIN 10µF

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 32/36 WAVE SOLDER PROFILE Profile Feature Old standard (Pb) New (Pb-free) Time within peak temperature tP 10 s 10 s Average ramp-up rate ~ 200 °C/s ~ 200 °C/s Final preheat temperature Ts ~ 130 °C ~ 130 °C Peak temperature TP + 235 °C + 260 °C Ramp-down rate -5 °C/s -5 °C/s Heating rate during preheat 4 °C/s 4 °C/s Wave Solder Diagram: Temperature [°C] Time [sec] First wave Second wave tP TS TP preheat ramp down 3 – 5 s 5°C/s 200°C/s 130 4°C/s 235

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 33/36 PHYSICAL DIMENSIONS RECOMMENDED DRILL HOLES TUBE all dimensions in mm

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 34/36 DOCUMENT HISTORY Revision Date Description Comment

1.0 May 2019 Final version

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 35/36 CAUTIONS AND WARNINGS The following conditions apply to all goods within the product series of MagI³C of Würth Elektronik eiSos GmbH & Co. KG: General:

  • All recommendations according to the general technical specifications of the data-sheet have to be complied with.
  • The usage and operation of the product within ambient conditions which probably alloy or harm the component surface has to be avoided.
  • Electronic components that will be used in safety -critical or high -reliability applications, should be pre -evaluated by the customer.
  • The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met,the component may be damaged or dissolved.
  • Do not drop or impact the components as material of the body, pins or termination may flake apart.
  • Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and sustainability over time.
  • The responsibility for the applicability of the customer specific products and use in a particular customer design is alway s within the authority of the customer. All technical specifications for standard products also apply to customer specific products.
  • Customer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety -related requirements concerning its products, and any use of Würth Elektronik eiSos GmbH & Co. KG components in its applications, notwithstanding any applications-related information or support that may be provided by Würth Elektronik eiSos GmbH & Co. KG. Customer represents and agrees that it has all the necessary expertise to create an d implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Customer will fully indemnify Würth Elektroni k eiSos and its representatives against any damages arising out of the use of any Würth Elektronik eiSos GmbH & Co. KG components in safety-critical applications. Product specific: Follow all instructions mentioned in the datasheet, especially:
  • The solder profile has to comply with the technical reflow or wave soldering specification, otherwise this will void the warranty.
  • All products are supposed to be used before the end of the period of 12 months based on the product date-code.
  • Violation of the technical product specifications such as exceeding the absolute maximum ratings will void the warranty.
  • It is also recommended to return the body to the original moisture proof bag and reseal the moisture proof bag again.
  • ESD prevention methods need to be followed for manual handling and processing by machinery.
  • Residual washing varnish agent that is used during the production to clean the application might change the characteristics of the body, pins or termination. Th e washing varnish agent could have a negative effect on the long term function of the product.
  • Direct mechanical impact to the product shall be prevented as the material of the body, pins or termination could flake or in the worst case it could break. As these devices are sensitive to electrostatic discharge customer shall follow proper IC Handling Procedures. DISCLAIMER This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable. However, no responsibility is assumed for inaccuracies or incompleteness.

173950336, 173950536 MagI3C Power Module FDSM – Fixed Step Down Regulator Module we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0 © May 2019 36/36 IMPORTANT NOTES The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG: 1. General Customer Responsibility Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge an d experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer d esign is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specificat ion is valid and suitable for the respective customer application or not. Accordingly, the customer is cautioned to verify that the datasheet is current before placing orders. 2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications. In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. 3. Best Care and Attention Any product-specific notes, warnings and cautions must be strictly observed. Any disregard will result in the loss of warranty. 4. Customer Support for Product Specifications Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter. 5. Product R&D Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC -Standard we inform about min or and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected. 6. Product Life Cycle Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design -in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 7. Property Rights All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used. 8. General Terms and Conditions Unless otherwise agreed in individ ual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at www.we-online.com.