WISE-4210 ADVANTECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
Industrial Proprietary LPWAN (SUB-G) Wireless I/O Module Proprietary LPWAN with using sub-1GHz wireless frequency Battery power for 5 years with 3 x 3.6V AA batteries Up to 5 km communication range in open space Longer communication range than 2.4GHz Better penetration through concrete and steel than 2.4GHz Less interference than 2.4GHz spectrum Application-ready I/O combination with modularization design Introduction LPWAN, created for machine-to-machine (M2M) and Internet of things (IoT) networks, is not a single technology, but a variety of low-power, wide area network technologies. Compare with traditional mobile network, LPWAN is known as lower cost with higher power efficiency. WISE-4210 series is the proprietary LPWAN which provides better connection compare with traditional 2.4G WiFi, WISE-4210 series is helpful of eliminating network interference. Additionally, WISE-4210 utilize a LPWAN(low-power, wide-area networks) wireless interface, which has a kilometer-long communication distance and battery power. The features of LPWAN make WISE modules ideal solutions for energy and environment monitoring. Reduced Interference and Extended Communication Range Compared with Wi-Fi, Bluetooth, Zigbee, or other 2.4GHz wireless interfae, a sub-GHz interface can reduce interference at sites. Moreover, Sub-GHz is a type of LPWAN designed for long-range communications. Under the same power consumption, sub-GHz offers a longer communication range with low data rate than other 2.4 GHz. technologies. Powered by a 3.6V AA Lithium Battery The low power consumption of sub-GHz enables the sensor node to be powered by a battery. With a 3.6V AA Lithium battery, the sensor node can maintain communication at a distance of 5 km for up to 5 years, thereby eliminating the need to recharge or change batteries. Star Topology Star topology, also known as star network, is the most common network setup. In star topology, every node connects to a central network device which means WISE- 4210-S200 series nodes acts as clients should be connected with WISE-4210-AP . In this configuration, user can organize their own network with 64 nodes paired. Data on a star network pass through WISE-4210-AP before continuing to its destination. WISE- 4210-AP with a LAN cable manages and controls most of all functions of the network. MQTT and RESTful API IoT Protocol Support IoT Wireless sensor nodes are designed for not only automation applications but also IoT applications that may use MQTT or RESTful web API IoT protocols for cloud integrations. Azure IoT Hub Support To provide a complete IoT sensing solution, the WISE-4210 series goes beyond being a wireless communication interface for sensors—it also provides cloud connectivity for additional user applications. With support for HTTPS and integrated APIs for Azure IoT Hub, the WISE-4210 series can automatically push data to the cloud without requiring an IoT gateway. 5 years 5 km Private Server MQTT RESTfulModbus LPWAN AP WISE-4210-AP LPWAN Sensor Node WISE-4210-S200 Series X64 All product specifications are subject to change without notice. Last updated: 21-Jun-2022
www.advantech.com/productsOnline Download WISE-4210 Digital Output (Sink Type) Channels 2 Output Current 100 mA At 0 -> 1: 100 us At 1 -> 0: 100 us (for Resistive Load) Supports Pules Output 5 kHz Max. Load Voltage 30V Serial Port Port Number 1 Type RS-485 Data Bits 7, 8 Stop Bits 1, 2 Parity None, Odd, Even Baud Rate (bps) 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 Protocol Modbus/RTU (Total 64 addresses by 30 max. instructions) WISE-S251 (6DI/1RS-485) Digital Input Channels 6 (Dry Contact) Supports 32-bit counter input function (maximum signal frequency 200Hz) Supports keep/discard counter value on power-off Support inverted digital input status Serial Port Port Number 1 Type RS-485 Data Bits 7, 8 Stop Bits 1, 2 Parity None, Odd, Even Baud Rate (bps) 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 Protocol Modbus/RTU (Total 32 address by max. 8 instructions)
Ordering Information
WISE-4210-APNA LPWAN Wireless to Ethernet AP – NA915/EU868 WISE-4210 Node WISE-4210-NA Proprietary LPWAN SUB-G Wireless I/O Module – NA915/EU868 WISE-4210-S231-NA LPWAN IoT WSN Temp & RH Sensor- NA902/EU868 WISE-S200 I/O Module WISE-S214-A 4AI/4DI WISE-S250-A 6DI, 2DO & 1RS-485 WISE-S251-A 6DI & 1RS-485 * Power saving is not for downlink mode. Accessories 1760002647-01 Bat.Cylindrical 3.6V/2500mAh AA Li/SOCl2 1750008836-01* 863-870MHz Dipole Antenna for WISE-4210 1750008837-01* 902-928MHz Dipole Antenna for WISE-4210 * AS923/EU868 version of WISE-4210 needs to order antenna separately 70 38 275 102 163 Unit: mmDimensions Common Specification WISE-4210 Frequency Band NA915: 923MHz (920.60~924.60), BW: 400kHz EU868: 868MHz (865.00~869.00), BW: 400kHz Antenna Gain 902~928MHz:1.33 dBi 863~870MHz:2.19 dBi Data Rate 625bps, 50kbps Outdoor Range 625bps: 5 km with line of sight 50kbps: 2 km with line of sight Topology Star Network Capacity 64 clients General Power Input AP: 10 ~ 50 VDC Sensor Node: 3 x AA, 3.6V Lithium Battery or 10 ~ 50 VDC Battery Life 625bps: 5 years with 10 minute update rate @ 25°C with WISE-S251/S231 50kbps: 5 years with 1 minute update rate @ 25°C with WISE-S251/S231 Configuration Interface AP: LAN port Sensor Node: Micro-B USB LED Indicator Status, Error, Tx, Rx, Battery/Signal Level Mounting DIN 35 rail, wall, pole and stack Dimension (W x H x D) 70 x 102 x 38 mm Certification CE, FCC, IC, NCC, TELEC Environment Operating Temperature -25 ~ 70°C Operating Humidity 5 ~ 95% RH Storage Temperature -40 ~ 85°C Storage Humidity 0 ~ 95% RH WISE-4210-AP (Access Point) Data Rate 625 bps, 2.5k bps, 5k bps, 50k bps, Ethernet RJ-45 (for configuration and data query) RS-485 Data+, Data- (for query node data) Messaging Protocol Modbus/TCP , Modbus/RTU, REST, MQTT Application Protocol HTTP , HTTPS, SNTP , DHCP Transport Protocol TCP , UDP Supports RESTful Web API in JSON format with HTTP protocol Supports Web Server in HTML5 WISE-4210-S231 (Built-in Temperature & Humidity Sensor) Temperature Sensor Operating Range -25°C ~ 70°C (-13°F ~ 157.9°F) Resolution 0.1 (°C/°F/K) Accuracy ±1.0°C (±1.8°F) (vertical installation) Humidity Sensor Operating Range 10 ~ 90% RH Resolution 0.1% RH Accuracy ±4% RH @ for 0%~50% RH WISE-S214 (4AI/4DI) Analog Input Channels 4 Resolution 16bits Bipolar 15bits Unipolar Sampling Rate 1Hz (per Channel) with 50/60Hz Rejection (Power Saving Mode) 10Hz (Total) with50/60Hz Rejection (Normal Mode) Accuracy ±0.1% for Voltage Input ±0.2% for Current Input Input Range 0~150mV, 0~500mV, 0~1V, 0~5V, 0~10V, ±150mV, ±500mV, ±1V, ±5V, ±10V, 0~20mA, ±20mA, 4-20mA Input Impedance >1MΩ (Voltage) Isolated voltage 3kVrms Support Data Scaling and Averaging Digital Input Channels 4 (Dry Contact) Supports 32-bit counter input function (maximum signal frequency 200Hz) Supports keep/discard counter value on power-off Support inverted digital input status WISE-S250 (6DI, 2DO& 1RS-485) Digital Input Channels 6 (Dry Contact) Supports 3kHz Frequency Input