1720 3M | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Air dries in seconds and is to be thermally cured for abrasion resistance
  • Adheres to a variety of surfaces including glass, metals and metal oxides.
  • Provides excellent anti-wetting, anti-stiction and anti-migration properties.
  • Contains no volatile organic compounds (VOCs) and has low global warming potential
  • Is optically transparent and contributes no additional haze and no loss of clarity Construction Product Information 120 100 0 500 1000 1500 2000 2500 Number of Linear Abrasion Cycles Novec 1720 Water Novec 1720 Hexadecane Static Contact Angle (°)

3M™ Novec™ 1720 Electronic Grade Coating Application Ideas

  • Provides easy clean, smudge- resistant protection for touch screens, liquid crystal and flat panel displays, mobile electronic handhelds, electronic tablets and other electronic components and devices
  • Can serve as – an anti-stiction coating for liquid crystal displays, micromotors or MEMS (Micro Electronic Mechanical Systems) components – an anti-migration coating for displays, spindle motors or lubricated electronic parts or – an anti-corrosion coating for a variety of materials and components Application Techniques Can be dipped, sprayed or selectively deposited. Water should be kept out of coating bath as contact will decrease the pot life. Surfaces to be coated should be clean and dried before application. The solvent will evaporate quickly and the fluoropolymer film will dry in minutes. The coating should be thermally cured in an oven for best results. Application Options Dipping (preferred), spray or syringe dispense Drying/Curing Dries at room temperature; can be handled in under two minutes; thermally cure at 135°C for 10-15 minutes Removability Permanent once cured Safety, Handling, Storage, Shelf Life To avoid thermal decomposition, neither the coating solution nor the dried fluoropolymer film should be subjected to temperatures above 250°C (482°F). When stored under conditions of 16-27°C (60-80°F) and less than 60% R.H. in the original, unopened container, the shelf life is certified for two years. Before using this product, please read the current product Material Safety Data Sheet (available through your 3M sales or technical service representative or at www.3M.com/Novec) and the precautionary statement on the product package. Follow all applicable precautions and directions. For Additional Information To request additional product information or sales assistance, contact 3M Customer Service at one of the numbers below or visit www.3M.com/Novec. For other 3M global offices or information on other 3M products for electronics, visit our web site at 3M.com/electronics. Please recycle. Printed in USA. © 3M 2014. All rights reserved. Issued: 3/14 9784HB 60-5002-0519-4 3M and Novec are trademarks of 3M Company. Used under license by 3M subsidiaries and affiliates. Electronics Markets Materials Division 3M Center, Building 224-3N-11 St. Paul, MN 55144-1000 www.3M.com/novec 1-800-810-8513 Product Use: All statements, technical information and recommendations contained in this document are based on tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application. Warranty and Limited Remedy: Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature, package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the product or refund the purchase price. Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental, or consequential regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. The Novec brand is the hallmark for a variety of proprietary 3M products. Although each has its own unique formula and performance properties, all Novec products are designed in common to address the need for safe, effective, sustainable solutions in industry-specific applications. These include precision and electronics cleaning, heat transfer, fire protection, lubricant deposition and several specialty chemical applications. The 3M™ Novec™ Brand Family 3M™ Novec™ Engineered Fluids 3M™ Novec™ Aerosol Cleaners 3M™ Novec™ 1230 Fire Protection Fluid 3M™ Novec™ Electronic Grade Coatings 3M™ Novec™ Electronic Surfactants United States 3M Electronics Markets Materials Division 800 810 8513 China 3M China Ltd. 86 21 6275 3535 Europe 3M Belgium N.V. 32 3 250 7521 Japan Sumitomo 3M Limited 813 3709 8250 Korea 3M Korea Limited 82 2 3771 4114 Singapore 3M Singapore Pte. Ltd. 65 64508888 Taiwan 3M Taiwan Ltd. 866 2 2704 9011