171

171 CDE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type 171 Radial Leaded Metallized Polypropylene Radial Box Metallized Polypropylene Capacitors Type 171 radial leaded, box, metallized polypropylene capacitors are available in five pitch sizes and have a flame retardant case and epoxy encapsulant that meets UL94V-0. The Type 171 is an excellent choice for applications requiring low dielectric losses, high in- sulation resistance in an AC or DC environment. The polypropylene direlectric gives this capacitor excellent pulse rise time (dv/dt) performance. Highlights High dv/dt Low leakage Radial leaded (7.5, 10, 15, 22.5, 27.5 mm pitch) Flame retardant case and encapsulant meets UL94V-0 Non-inductively wound Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric Withstand Voltage: Dissipation Factor (DF): 0.0022 to 3.3 µF 160 to 630 Vdc (90 to 250 Vac, 60 Hz) ±5%, ±10%, ±20% –55 ºC to +105 ºC (derate linearly to 50% rated voltage from 85 ºC to 105 ºC) 1.6 x rated voltage for 2 s @ +25 ºC ±5 ºC tgδ x 10–4 at +25 ºC ±5 ºC kHz C ≤0.1 µF 0.1 µF <C ≤1 µF C >1 µF 1 ≤6 ≤6 ≤6 10 ≤10 ≤20 — 100 ≤30 — — Insulation Resistance: Self Inductance: Life Test: Damp Heat Test: Soldering: Long Term Storage Stability: Maximum Pulse Rise Time dv/dt (V/µ): 100,000 MΩ x µF, 200,000 MΩ Min. 2 mm lead length - total self inductance Lead Spacing (Pitch) Vn 7.5 10 15 22.5 27.5 160 5.5 4 2 1.5 1 250 15 1 1 7 4 3 400 35 20 10 5.5 5 630 55 30 15 8 7 If the working voltage (V) is less than the nominal voltage (Vn), the capaci- tor can work at higher dv/dt . In this case, the maximum value allowed is obtained by multiplying the above value (See table dv/dt) with the ratio Vn/V 2000 hrs @ 85 ºC 1.25 x Vn 95% RH @ +40 ºC for 56 days 260 ºC ±5 ºC for 10 s ±1 s ΔC/C ≤ ±0.5% after 2 years Pitch (mm) 7.5 10 15 22.5 27.5 L (nH) ≈ 8 9 10 18 18 RoHS Compliant

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type 171 Radial Leaded Metallized Polypropylene Outline Drawing Ratings Cap (µF) Inches (mm) ESR (mΩ) 20 kHz to 100 kHz IRMS (Amps) Catolog Part Number L Max T Max H Max S (Pitch) Ød 25 ºC 45 ºC 85 ºC

160 Vdc / 90 Vac 60 Hz

Not applicable. These capacitance values are not customarily used in switched- mode power supplies

250 Vdc / 90 Vac 60 Hz

Not applicable. These capacitance values are not customarily used in switched- mode power supplies * indicates capacitance tolereance, J = ±5%, K = ±10%, M = ±20% RoHS Compliant

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type 171 Radial Leaded Metallized Polypropylene Cap (µF) Inches (mm) ESR (mΩ) 20 kHz to 100 kHz IRMS (Amps) Catolog Part Number L Max T Max H Max S (Pitch) Ød 25 ºC 45 ºC 85 ºC Not applicable. These capacitance values are not customarily used in switched- mode power supplies Not applicable. These capacitance values are not customarily used in switched- mode power supplies Ratings Cap (µF) Inches (mm) ESR (mΩ) IRMS (Amps) Catolog Part Number 20 kHz to L Max T Max H Max S (Pitch) Ød 100 kHz 25 ºC 45 ºC 85 ºC

400 Vdc / 220 Vac 60 Hz

Not applicable. These capacitance values are not customarily used in switched-mode power supplies

630 Vdc / 250 Vac 60 Hz

Not applicable. These capacitance values are not customarily used in switched-mode power supplies * indicates capacitance tolereance, J = ±5%, K = ±10%, M = ±20% RoHS Compliant RoHS Compliant