170823J400GC1

170223J160AA1 CDE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type 170 Axial Leaded Metallized Polypropylene The Type 170 series axial lead metallized polypropylene capacitors are available in bulk or on tape and reel for automatic insertion. The tape wrap and epoxy end fill construction meets UL510 (outer wrap) and UL94V0 (epoxy). Type 170 is non-inductive with low ESR and high current capability for switch-mode power supply

applications

High Current / Low ESR, Wrap and Fill Axial Leaded Capacitors Highlights Low ESR High current Available on tape and reel or bulk Epoxy end fill meets UL94V-0 Non inductively wound Flame retardant outer wrap meets UL510 Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric Withstand Voltage: Dissipation Factor (DF): 0.001 µF to 4.7 µF 160 to 630 Vdc (90 to 250 Vac, 60 Hz) ±5%, ±10%, ±20% –55 ºC to +105 ºC ( derate linearly to 50% rated voltage at 105 ºC) 1.6 x rated voltage for 2 s @ +25 ºC ±5 ºC tgδ x 10 –4 at +25 ºC ±5 ºC kHz C ≤0.1 µF 0.1 µF <C ≤1 µF C >1 µF 1 ≤6 ≤6 ≤6 10 ≤10 ≤20 — 100 ≤30 — — Insulation Resistance: Self Inductance: Life Test: Damp Heat Test: Soldering: Long Term Storage Stability: Maximum Pulse Rise Time dv/dt and Pulse Characteristic (Wo): 100,000 MΩ x µF, 200,000 MΩ Min. 1 nH max. per 1 mm lead and body length 1000 hrs @ 85 ºC 1.25 x Vn 95% RH @ +40 ºC for 21 days 260 ºC ±5 ºC for 10 s ±1 s ΔC/C ≤ ±0.5% after 2 years Outline Drawing 1.58 ±0.2 (40 ±5 mm) L Max D Max Ød ±.002 ±0.05 mm) L Max Vn 11 16.5 20.5 28 33 160 5 5 3 2 1 250 11 10 7 4 2.5 400 – 13.5 10 6.5 4 630 – 20 15 10 6 If the working voltage (V) is less than the nominal voltage (Vn), the capaci- tor can work at higher dv/dt . In this case, the maximum value allowed is obtained by multiplying the above value (See table dv/dt) with the ratio Vn/V 1.58 ±0.2 (40 ±5 mm) Complies with the EU Directive 2 0 0 2 / 9 5 / E C r e q u i r e m e n t restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). Lead Material: tinned copper wire

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type 170 Axial Leaded Metallized Polypropylene Tape and Reel Specifications L Max Lead Spacing Distance Between Class(Body Length) Reel Flanges Inches mm Inches mm Inches mm ≤.433 ≤11 2.06 52.4 3.0 75 1 ≥1.03 ≥26 2.87 73.0 3.7 95 3 ΛAdd class number (1, 2 or 3) to Catalog Part Number to indicate tape and reel Diameter Inches mm Quantity per Reel 0.197 5 3,000 .236 thru .256 6.0 thru 6.5 1,200 0.276 7 1,100 .315 thru .346 8 thru 8.5 800 .354 thru .413 9 thru 10.5 500 .433 thru .512 11 thru 13 300 .551 thru .571 14 thru 14.5 200 >0.571 14.5 Not available Ratings Inches (mm) ESR (mΩ) 20 kHz to IRMS (Amps) Inches (mm) ESR (mΩ) 20 kHz to IRMS (Amps) Cap Catalog Cap Catalog (µF) Part Number D Max L Max 100 kHz 25 ºC 45 ºC 85 ºC (µF) Part Number D Max L Max 100 kHz 25 ºC 45 ºC 85 ºC

160 Vdc / 90 Vac 60 Hz 250 Vdc / 200 Vac 60 Hz

Not applicable. These capacitance values are not customarily used in switched-mode power supplies. Not applicable. These capacitance values are not customarily used in switched-mode power supplies. J = ±5%, K = ±10%, M = ±20% See tape & reel specifications to determine which class applies. Part Number highlighted in yellow, available until stock is depleted. ØdØd Replacement Part No. with "BB" case size.

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type 170 Axial Leaded Metallized Polypropylene * Indicates Tolerance J = ±5%, K = ±10%, M = ±20% ΛIf ordering Tape & Reel, see specification to determine which class (1, 2, or 3) applies Cap Inches (mm) ESR (mΩ) IRMS (Amps) Catolog 20 kHz to (µF) Part Number D Max L Max Ød 100 kHz 25 ºC 45 ºC 85 ºC

400 Vdc / 220 Vac 60 Hz

Not applicable. These capacitance values are not customarily used in switched-mode power supplies Cap Inches (mm) ESR (mΩ) IRMS (Amps) Catolog 20 kHz to (µF) Part Number D Max L Max Ød 100 kHz 25 ºC 45 ºC 85 ºC

630 Vdc / 250 Vac 60 Hz

Not Applicable. These capacitance values are not customarily used in switched-mode power supplies