16VTO250V

16VTO250V YAGEO | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 23

Technical content

Product Specification – January 29, 2024 V.19 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0

16 V TO 250 V

0.22 pF to 100 nF RoHS compliant & Halogen Free sd

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 SCOPE This specific ation describes NP0 series chip capacitors with lead - free terminations.

APPLICATIONS

⚫ Consumer electron ics for example - Tuners - Television receivers - All types of cameras ⚫ Telecommunications ⚫ Data processing

FEATURES

⚫ Supplied in tape on reel ⚫ Nickel -barrier en d termination ⚫ RoHS compliant ⚫ Halogen Free compliant ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP CTC & 12NC All part numbers are identified by the series, size, tolerance, TC material, packing style, voltage, process code, termination and capacitance value. YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee GLOBAL PART NUMBER (PREFERRED ) CC XXXX X X NPO X BN XXX (1) SIZE – INCH BASED (METRIC) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1812 (4532) (2) TOLERANCE B = ± 0.1 pF C = ± 0.25 pF D = ± 0.5 pF F = ± 1% G = ± 2% J = ± 5% K = ± 10% (3) PACKING STYLE R = Paper/PE taping reel; Reel 7 inch K = Blister taping reel; Reel 7 inch P = Paper/PE taping reel; Reel 13 inch F = Blister taping reel; Reel 13 inch C = Bulk case (4) RATED VOLTAGE 7 = 16 V 8 = 25 V 9 = 50 V 0 = 100 V A = 200 V Y = 250 V (5) CAPACITANCE VALUE 2 significant digits+number of zeros The 3rd digit signifies the multiplying factor, and letter R is decimal point Example: 121 = 12 x 101 = 120 pF

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 Table 1 For outlines see fig. 2 DIMENSION MBB211 T L2 L3 W OOUUTTLLIINNEESS For dimension see Table 1 Fig. 2 Surface mounted multi layer ceramic c apacitor dimension CONSTRUCTION The capacitor con sists of a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained. This s tructure gives rise to a high capacitance per unit volume. The inner elec trodes are conne cted to the two end terminations and finally covered with a layer of plated tin (NiSn). The terminations are lead -free. A cross section of the structure is shown in Fi g.1. MLB457 terminations electrodes ceramic material Fig. 1 Surface mounted multilayer ceramic capacitor co nstruction TYPE L1 (mm) W (mm) T (MM) L2 / L3 (mm) L4 (mm) min. max. min. 0805 0.25 0.75 0.70 0.85 ± 0.10 1.25 ± 0.20 1206 0.6 ± 0.10 0.25 0.75 1.40 0.85 ± 0.10 1.25 ± 0.20 1.6 ± 0.20 1210 0.25 0.75 1.40 1.25 ± 0.20 1.6 ± 0.20 2.0 ± 0.20 1812 4.5 ± 0.40 3.2 ± 0.30 0.85 ± 0.10 1.25 ± 0.20 1.60 ± 0.20 0.85 ± 0.10 1.25 ± 0.20 1.6 ± 0.20 0.25 0.75 2.20 1.25 ± 0.20 1.6 ± 0.20 0.25 0.75 3.40 NOTE 1. Dimension for size 0805 and 1206, C ≤ 1 nF 2. Dimension for size 0805 and 1206, C > 1 nF

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 CAPACITANCE RANGE & THICKNESS FOR NP0 Table 2 Sizes from 0201 to 0402 CAP. 0201 0402

25 V 50 V 100 V 16 V 25 V 50 V 100 V

1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-12 series is on request

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 CAPACITANCE RANGE & THICKNESS FOR NP0 Table 3 Sizes from 0603 CAP. 0603

25 V 50 V 100 V 200 V 250 V

0.22 pF NOTE 3. Values in shaded cells indicate thickness class in mm 4. Capacitance value of non E-12 series is on request

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 CAP. 0402

16 V 25 V 50 V 100 V

1.2 nF 1.5 nF 1.8 nF 2.2 nF 2.7 nF 3.3 nF 3.9 nF 4.7 nF 5.6 nF 6.8 nF 8.2 nF 10 nF 12 nF 15 nF 18 nF 22 nF 33 nF NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-12 series is on request Table 4 Sizes from 0201 to 0402 (continued) CAPACITANCE RANGE & THICKNESS FOR NP0

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 CAP. 0603

1. Values in shaded cells indicate thickness class in mm 4. Capacitance value of non E-12 series is on request Table 5 Sizes from 0603 CAPACITANCE RANGE & THICKNESS FOR NP0

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 CAPACITANCE RANGE & THICKNESS FOR NP0 Table 6 Sizes from 0805 to 1206 CAP. 0805 1206

25 V 50 V 100 V 200 V 250 V 25 V 50 V 100 V 200 V 250 V

0.22 pF NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-12 series is on request

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 CAPACITANCE RANGE & THICKNESS FOR NP0 Table 7 Sizes from 1210 CAP. 1210 0.22 pF 0.47 pF 0.82 pF 1.0 pF 1.2 pF 1.5 pF 1.8 pF 2.2 pF 2.7 pF 3.3 pF 3.9 pF 4.7 pF 5.6 pF 6.8 pF 8.2 pF 10 pF 12 pF 15 pF 18 pF 22 pF 27 pF 33 pF 39 pF NOTE 3. Values in shaded cells indicate thickness class in mm 4. Capacitance value of non E-12 series is on request

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 CAP. 0805 1206 12 nF 0.85± 0.1 0.85± 0.1 15 nF 0.85± 0.1 0.85± 0.1 18 nF 0.85± 0.1 0.85± 0.1 22 nF 0.85± 0.1 0.85± 0.1 33 nF 0.85± 0.1 0.85± 0.1 47 nF 1.25± 0.2 1.25± 0.2 56 nF 68 nF 1.60± 0.2 1.60± 0.2 82 nF 100 nF 1.60± 0.2 1.60± 0.2 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-12 series is on request Table 8 Sizes from 0805 to 1206 CAPACITANCE RANGE & THICKNESS FOR NP0

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 CAP. 1210 47 nF 1.60± 0.2 1.60± 0.2 56 nF 68 nF 82 nF 100 nF NOTE 3. Values in shaded cells indicate thickness class in mm 4. Capacitance value of non E-12 series is on request Table 9 Sizes from 1210 CAPACITANCE RANGE & THICKNESS FOR NP0

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 CAPACITANCE RANGE & THICKNESS FOR NP0 Table 10 Sizes 1812 CAP. 1812

50 V 100 V 200 V 250 V

56 pF 1.25± 0.2 68 pF 1.25± 0.2 82 pF 1.25± 0.2 100 pF 1.25± 0.2 120 pF 1.25± 0.2 150 pF 1.25± 0.2 180 pF 1.25± 0.2 220 pF 1.25± 0.2 270 pF 1.25± 0.2 10 nF 1.25± 0.2 1.25± 0.2 12 nF 1.25± 0.2 1.25± 0.2 15 nF 1.25± 0.2 1.25± 0.2 18 nF 1.25± 0.2 1.25± 0.2 22 nF 1.25± 0.2 1.25± 0.2 33 nF 1.25± 0.2 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-12 series is on request

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 MBG251-1 E F W T cover tape Fig. 3 Paper/PE tape PAPER/PE TAPE SPECIFICATION Table 11 Dimensions of paper/PE tape for relevant chip size; see Fig.3 SIZE CODE SYMBOL Unit: mm A0 B0 W E F P0 (1) P1 P2 Ø D0 K0 T NOTE 1. P0 pitch tolerance over any 10 pitches is 0.2 mm 2. 4 x 0402 stands for 0508 array 3. 4 x 0603 stands for 0612 array

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 SCM015 E F W A0 D 1 direction of unreeling K 0 cover tape Fig. 4 Blister tape BBLLIISSTTEERR TTAAPPEE SSPPEECCIIFFIICCAATTIIOONN Table 12 Dimensions of blister tape for relevant chip size; see Fig.4 SIZE CODE SYMBOL Unit: mm A0 B0 K0 W E F Ø D0 Ø D1 P0 (2) P1 P2 T2 NOTE 1. Typical capacitor displacement in pocket 2. P0 pitch tolerance over any 10 pitches is ±0.2 mm K0: so chosen that the orientation of the component cannot change For W = 8 mm: T2 = 3.5 mm max. For W = 12 mm: T2 = 6.5 mm max. For dimension see Table 4

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 RREEEELL SSPPEECCIIFFIICCAATTIIOONN NC A HBK039 Fig. 5 Reel Table 13 Reel dimensions; see Fig.5 TAPE WIDTH SYMBOL Unit: mm A N C W1 W2max. PROPERTIES OF REEL Material: polystyrene Surface resistance: <10 10 X/sq.

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 Table 14 THICKNESS CLASSES AND PACKING QUANTITY SIZE CODE THICKNESS CLASSIFICATION TAPE WIDTH QUANTITY PER REEL Ø 180 MM / 7 INCH Ø 330 MM / 13 INCH QUANTITY PER BULK CASE Paper/PE Blister Paper/PE Blister 0402 0.5 ± 0.05 mm 8 mm 10,000 --- 50,000 --- 50,000 0603 0.8 ± 0.1 mm 8 mm 4,000 --- 15,000 --- 15,000 0805 0.85 ± 0.1 mm 8 mm 4,000 --- 15,000 --- 8,000 1206 1210 1,000 --- --- --- 500 --- --- --- 1808 1812

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0

ELECTRICAL CHARACTERISTICS

NNPP00 DDIIEELLEECCTTRRIICC CCAAPPAACCIITTOORRSS;; NNIISSNN TTEERRMMIINNAATTIIOONNSS Unless otherwise stated all electrical values apply at an ambient temperat ure of 20±1 °C, an atmospheric pressure of 86 to 106 kPa, and a relative humidity of 63 to 67%. DESCRIPTION VALUE Capacitance range 0.22 pF to 100 nF Capacitance tolerance C < 10 pF ± 0.1 pF, ± 0.25 pF, ± 0.5 pF Dissipation factor (D.F.) C < 30 pF ≤ 1 / ( 400 + 20C ) C ≥ 30 pF ≤ 0.1 % Insulation resistance after 1 minute at Ur (DC) Rins ≥ 10 GΩ or Rins × Cr ≥ 500 seconds whichever is less Maximum capacitance change as a function of temperature (temperature characteristic/coefficient): ± 30 ppm/°C Operating temperature range: –55 °C to +125 °C Table 15 0 5040 CCB107 20 3010 C (%) C VDC (V) Fig. 7 Typical capacitance change with respect to the capacitance at 1 V as a function of DC voltage MEA607 0 40 80 120 T ( C)o TC (x10 /K)6 Fig. 6 Typical temperature coefficient as a function of temperature Sample limits (broken lines). Requirement levels (dotted lines)

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 CCA044 7.5 2.5 40 0 40 80 120 T (oC) tan Fig. 8 Typical tan δ as a function of temperature SOLDERING RECOMMENDATION Table 16 SOLDERING METHOD SIZE 0201 0402 0603 0805 1206 ≥ 1210 Reflow O O O O O O Wave --- --- O O O ---

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 TESTS AND REQUIREMENTS Table 17 Test procedures and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Mounting IEC 60384-

4.3 The capacitors may be mounted on printed-circuit boards

4.4 Any applicable method using × 10 magnification In accordance with specification

Capacitance 4.5.1 Class 1: f = 1 MHz for C ≤ 1 nF, measuring at voltage 1 Vrms at 20 °C f = 1 KHz for C > 1 nF, measuring at voltage 1 Vrms at 20 °C Within specified tolerance Dissipation factor (D.F.)

4.5.2 Class 1:

f = 1 MHz for C ≤ 1 nF , measuring at voltage 1 Vrms at 20 °C f = 1 KHz for C > 1 nF, measuring at voltage 1 Vrms at 20 °C In accordance with specification Insulation resistance

4.5.3 At Ur (DC) for 1 minute In accordance with specification

4.6 Capacitance shall be measured by the steps shown in the

following table. The capacitance change should be measured after 5 min at each specified temperature stage. Step Temperature(°C) a 25±2 b Lower temperature± 3 °C c 25± 2 d Upper Temperature± 2 °C e 25± 2 (1) Class I Temperature Coefficient shall be calculated from the formula as below Temp, Coefficient = 610T xC1 C1-C2 Δ [ppm/°C] C1: Capacitance at step c C2: Capacitance at 125 °C (2) Class II Capacitance Change shall be calculated from the formula as below ∆C = C1-C2 x 100% C1: Capacitance at step c C2: Capacitance at step b or d Class1: ∆ C/C: ± 30ppm

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 TEST TEST METHOD PROCEDURE REQUIREMENTS Adhesion 4.7 A force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate Force size ≥ 0603: 5N size = 0402: 2.5N size = 0201: 1N Bond strength of plating on end face 4.8 Mounting in accordance with IEC 60384-22 paragraph 4.3 No visible damage Conditions: bending 1 mm at a rate of 1 mm/s, radius jig 5 mm ∆C/C Class 1: NP0: within ± 1% or 0.5 pF whichever is greater Resistance to soldering heat IEC 60384-

4.9 Precondition: 150 +0/–10 °C for 1 hour, then keep for 24

± 1 hours at room temperature Preheating: for size ≤ 1206: 120 °C to 150 °C for 1 minute Preheating: for size >1206: 100 °C to 120 °C for 1 minute and 170 °C to 200 °C for 1 minute Solder bath temperature: 260 ± 5 °C Dipping time: 10 ± 0.5 seconds Recovery time: 24 ± 2 hours Dissolution of the end face plating shall not exceed 25% of the length of the edge concerned ∆C/C Class 1: NP0: within ± 0.5% or 0.5 pF whichever is greater D.F. within initial specified value Rins within initial specified value Solderability 4.10 Preheated the temperature of 80 °C to 140 °C and maintained for 30 seconds to 60 seconds. 1. Temperature: 235± 5°C / Dipping time: 2 ± 0.5 s 2. Temperature: 245± 5°C / Dipping time: 3 ± 0.5 s (lead free)Depth of immersion: 10mm The solder should cover over 95% of the critical area of each termination Rapid change of temperature

4.11 Preconditioning;

150 +0/–10 °C for 1 hour, then keep for 24 ± 1 hours at room temperature 5 cycles with following detail: 30 minutes at lower category temperature 30 minutes at upper category temperature Recovery time 24 ± 2 hours No visual damage ∆C/C Class 1: NP0: within ± 1% or 1 pF whichever is greater D.F. meet initial specified value Rins meet initial specified value

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 TEST TEST METHOD PROCEDURE REQUIREMENTS Damp heat with Ur load IEC 60384- 4.13 1. Preconditioning, class 2 only: 150 +0/-10 °C /1 hour, then keep for 24 ± 1 hour at room temp 2. Initial measure: Spec: refer to initial spec C, D, IR 3. Damp heat test: 500 ± 12 hours at 40 ± 2 °C; 90 to 95% R.H. 1.0 Ur applied. 4. Recovery: Class 1: 6 to 24 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be preconditioned according to “IEC 60384 4.1” and then the requirement shall be met. No visual damage after recovery ∆C/C Class 1: NP0: within ± 2% or 1 pF whichever is greater D.F. Class 1: NP0: ≤ 2 x specified value Rins Class 1: NP0: ≥ 2,500 MΩ or Rins x Cr ≥ 25s whichever is less Endurance 4.14 1. Preconditioning, class 2 only: 150 +0/-10 °C /1 hour, then keep for 24 ± 1 hour at room temp 2. Initial measure: Spec: refer to initial spec C, D, IR 3. Endurance test: Temperature: NP0: 125 °C Specified stress voltage applied for 1,000 hours: Applied 2.0 x Ur for general product. 4. High voltage series follows with below stress condition: Voltage NPO ≤ 100V 2.0 x Ur 200/250V 1.5 x Ur 500/630V 1.3 x Ur ≥ 1KV 1.2 x Ur * NPO, 0603, 100V, 5.1nF to 10nF, apply voltage : 1.5 x Ur 5. Recovery time: 24 ± 2 hours 6. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be preconditioned according to “IEC 60384 4.1” and then the requirement shall be met. No visual damage ∆C/C Class1: NP0: within ± 2% or 1 pF whichever is greater D.F. Class1: NP0: ≤ 2 x specified value Rins Class1: NP0: ≥ 4,000 MΩ or Rins x Cr ≥ 40s whichever is less Voltage proof IEC 60384-1 4.6 Specified stress voltage applied for 1 minute Ur ≤ 100 V: series applied 2.5 Ur 100 V < Ur ≤ 200 V series applied (1.5 Ur + 100) 200 V < Ur ≤ 500 V series applied (1.3 Ur + 100) Ur > 500 V: 1.3 Ur I: 7.5 mA No breakdown or flashover

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0

REVISION HISTORY

REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 19 Jan. 29, 2024 - - Add 100 V to 250 V product range Version 18 Jun. 14, 2023 - - Update 1206/12nF to 47nF dimension Version 17 Jul. 29, 2019 - - Update 0805/10nF dimension Version 16 Mar. 7, 2017 - - 0805 L4 spec updated Version 15 Nov. 21, 2016 - - Product range updated Version 14 Jul. 22, 2016 - - Add 0805/8.2nF and 10nF/ 16V to 50V, T=1.25mm Version 13 May. 16, 2016 - - Product range updated Version 12 Feb. 16, 2016 - - Product range updated Version 11 Sep. 11, 2014 - - Product range updated Version 10 Feb. 18, 2014 - - Product range updated Version 9 Jun. 17, 2013 - - Product range updated Version 8 Aug 05, 2011 - - Dimension updated Version 7 Jun 14, 2011 - - Size1210 T=1.0mm SPQ added - Dimension updated Version 6 Jan 06, 2011 - - Dimension updated Version 5 Dec 29, 2010 - - Dimension updated Version 4 Nov 23, 2010 - - Dimension updated Version 3 Apr 20, 2010 - - The statement of "Halogen Free" on the cover added - Dimension updated Version 2 Oct 26, 2009 - - Typo updated Version 1 Jun 02, 2009 - - 12NC code updated Version 0 Apr 15, 2009 - - New datasheet for general purpose NP0 series with RoHS compliant - Replace the "16V to 50V" part of pdf files: NP0_16V_7, NP0_16V-to- 100V_6, NP0_25V_7, NP0_50-to-500V_11 - Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to- 50V_2 and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2 - Define global part number - Description of "Halogen Free compliant" added - Test method and procedure updated

www.yageo.com Jan. 29, 2024 V.19 Surface-Mount Ceramic Multilayer Capacitors Product specification General Purpose 16 V to 250 V NP0 LEGAL DISCLAIMER YAGEO, its distributors and agents (collectively, “YAGEO”), hereby disclaims any and all liabilities for any errors, inaccur acies or incompleteness contained in any product related information, including but not limited to product specifications, datasheet s, pictures and/or graphics. YAGEO may make changes, modifications and/or improvements to product related information at any time and without notice. YAGEO makes no representation, warranty, and/or guarantee about the fitness of its products for any particular purpose or the continuing production of any of its products. To the maximum extent permitted by law, YAGEO disclaims (i) any and all liability ar ising out of the application or use of any YAGEO product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of f itness for a particular purp ose, non -infringement and merchantability. YAGEO products are designed for general purpose applications under normal operation and usage conditions. Please contact YAGEO for the applications listed below which require especia lly high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property: Aerospace equipment (artificial satellite, rocket, etc.), Atomic energy -related equipment, Aviation equipment, Disaster preven tion equipment, crime preven tion equipment, Electric heating apparatus, burning equipment, Highly public information network equipment, data -processing equipment , Medical devices, Military equipment, Power generation control equipment, Safety equipment, T raffic signal equipment, Tra nsportation equipment and Undersea equipment, or for any other application or use in which the failure of YAGEO products could result in personal injury or death, or serious property damage. Particularly YAGEO Corporation and it s affiliates do not recommen d the use of commercial, automotive, and/or COTS grade products for high reliability applications or manned space flight. Information provided here is intended to indicate product specifications only. YAGEO reserves all the rig hts for revising this conten t without further notification, as long as products are unchanged. Any product change will be announced by PCN.