PPTC16V YINT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Overcurrent protection device Trustworthy electronic circuit protection expert 16V Series www.yint.com.cn Rev:19.31 Polymer PTC Resettable 16V Series Features:

  • RoHS Compliant＆ Halogen Free
  • Radial leaded Devices
  • Cured，flameretardant epoxy polymer insulating material meets UL94V-0 requirements
  • Operation Current: 0.1A~14A，Maximum Voltage: 16Vdc，Operating Temperature：-40℃TO85℃ Product Dimensions Pig1 pig2 Unit ：mm Model Dimensions（mm） Lead material Shape A(max) B(max) C(max) D(typ) Tinned matel(mm) Fig A ll data sheet.com

Overcurrent protection device Trustworthy electronic circuit protection expert 16V Series www.yint.com.cn Rev:19.32 Note: ① Dimensions A, B, C is the maximum size, D values are typical tolerance of ± 0.50mm Thermal Derating Chart-IH（A） Model Maximum ambient operating temperatures（℃） -40 -20 0 25 40 50 60 70 80 85 Electrical Characteristic Model IHold ITrip Vmax Imax PdMax Maximum Timeto Trip Nominalresistance（mΩ） (A) (A) V（DC） A W Current（A） Time（S） Rmin Rmax 16V-010 0.1 0.3 16 100 0.38 0.5 5 1500 7500 16V-025 0.25 0.5 16 100 0.45 1.25 5 500 1950 16V-030 0.3 0.6 16 100 0.49 1.5 5 300 700 16V-050 0.5 1.0 16 100 0.56 2.5 5 200 500 16V-075 0.75 1.5 16 100 0.72 3.75 5 100 260 16V-090 0.9 1.8 16 100 0.83 4.5 5 90 180 16V-110 1.1 2.2 16 100 0.94 5.5 5 60 150 16V-135 1.35 2.7 16 100 1.2 6.75 5 40 130 A ll data sheet.com

Overcurrent protection device Trustworthy electronic circuit protection expert 16V Series www.yint.com.cn Rev:19.33 16V-160 1.6 3.2 16 100 1.4 8 5 40 110 16V-200 2 4 16 100 2.2 6 15 35 75 16V-300 3 6 16 100 2.3 9 15 20 60 16V-400 4 8 16 100 2.4 12 15 20 40 16V-500 5 10 16 100 2.6 15 15 14 25 16V-600 6 12 16 100 2.8 18 15 10 21 16V-700 7 14 16 100 3.0 21 15 8 15 16V-800 8 16 16 100 3.0 24 15 6 13 16V-900 9 18 16 100 3.3 27 25 4 12 16V-1000 10 20 16 100 3.7 30 30 4 11 16V-1100 11 22 16 100 3.7 33 30 3 9 16V-1200 12 24 16 100 4.2 36 30 3 8 16V-1300 13 26 16 100 4.2 39 50 3 8 16V-1400 14 28 16 100 4.2 40 50 3 7 Test Procedures And Requirements Test TestConditions Accept/Reject Criteria Resistance In still air@ 25℃ Rmin≤R≤Rmax Time to Trip Specified current，Vmax，25℃ Tmaximum Timeto Trip Hold Current 60min，at IH No trip Trip Cycle Life Vmax，Imax，100cycles No arcing or burning Trip Endurance Vmax，24hours No arcing or burning Physical Characteristics and Environmental Specifications Test Conditions Resistance change Passive aging +85℃，1000hrs ±8% typical Humidity aging +85℃，85%R.H.1000hrs ±8% typical Thermal shock +125℃ to -55℃，10times ±12% typical Resistance to solvent MIL-STD-202，Method 215 No change Vibration MIL-STD-202，Method 201 No change 1. Ambient temperature: -40℃～85℃ 2. Humidity: ≤95%HR(40℃) 3. Atmospheric pressure: 86Kpa ~106Kpa. 4 .Vibration frequency: 10Hz ~ 50Hz. 5. Acceleration: 98m/s2. 6. Storage temperature: -40℃~85℃. 7.Soldering

7.1 Wave Soldering:

Soldering Temperature:240℃~270℃ Soldering Time:≤5sec. Soldering Position: Resettable fusewire and the bottom≥ 6mm。 A ll data sheet.com

Overcurrent protection device Trustworthy electronic circuit protection expert 16V Series www.yint.com.cn Rev:19.34

7.2 Manual soldering

Soldering Temperature:280℃~300℃ Soldering Time: ≤2sec. Soldering Position: Resettable fusewire and the bottom ≥ 6mm。 Electrical Specifications: IH=Hold current:maximum current at which the device will not trip at 25℃ still air. IT=Trip current:minimum current at which the device will nalways at 25℃ still air. Vmax=Maximum voltage device can withstand without damage at rated current. Imax=Maximum fault current device can withstand tithout damage at rated voltage. Ttrip=Maximum timeto trip(s) at assigned current. Pd=Typical power dissipation:typical amount of power dissipated by the decice when in state air environment. Rmin=Minimum device resistance at 25℃ prior to tripping. Rmax=Maximum device resistance at 25℃ prior to tripping. Warning: PPTC devices are intended for protection against occasional over-current or over-temperature fault conditions,and should not be used when repeated fault conditions are anticipated.Operation beyond maximum tatings of improper use may result in device damage and possible electrical arcing and flame. Notes： Thespecificationisintendedtopresentapplication,productandtechnicaldatatoassisttheuser inselectingPPTC circuitproduction devices,However,usersshouldimdependentlyevaluate andtestthe suitabilityofeach product.YINT makesonwarrantiesasto the acduracyorcompletenessoftheinformationanddisclaimsanyliatilityresultingformitsuse,YINT ’sonlyobligationsarethoseimthe YINT StandardRermsandConditions ofSaleandinnocasewillYINT beliable foranyincidental,imdirect,orconsequential damagesarisingfromthesale,resale,or misuesof itsproducts.YINT reservestherighttochangeof update,withoutnotice,any informationcontainedinthisspecification. A ll data sheet.com