16HM SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

www.sensata.com Copyright © 2018 Sensata Technologies, Inc. 16HM | MOTOR PROTECTORS Hermetically Sealed Single Phase On Winding Protection SPECIFICATIONS Features and Benefits Product Description Line Break Operation

  • Direct line break
  • Automatic reset
  • Compact and rugged construction
  • Provides start winding protection
  • Meets scroll and high side compressor requirements
  • Application range - 2HP to 6HP*
  • Tamperproof protection
  • Hermetically sealed The 16HM utilizes two internal heaters. One of them is sensitive to start winding current and the other is sensitive to main winding current. The device can protect against start winding overheating and against conditions which generate high main winding currents. Its compact and rugged design make it resistant to mechanical shock and suitable for installation directly Klixon® 16HM motor protectors are line break automatic reset controls which are wired in series with the motor windings. These protectors are designed to track winding temperatures and to respond to changes in line current. When properly applied, the 16HM can provide protection against motor overheating under the following conditions:
  • Running Overload • High/Low Voltage Locked Rotor
  • High Voltage Light Load • Loss of Refrigerant Charge
  • Welded Start Relay • Shorted Capacitor
  • Blocked Condenser Fan Open Temperature 95ºC - 155ºC (in 5ºC increments) Tolerance ±5ºC Open, ±9ºC Close Series Line Voltage Locked Rotor Current 16HM 1XX 230V *165 Amps Protector Rating * To be used as a guide for selection only, consult factory for specific life test data

www.sensata.com Page 2 Copyright © 2018 Sensata Technologies, Inc. Epoxy protected glass seals Optional terminations DIAGRAMS Basic 16HM Envelope Circut Diagram .666 (16.91)** .646 (16.40) .787 (19.88) .777 (19.73) .060 (1.52) MAX. .832 (21.13) .803 (20.37) 1.135 (28.82) 1.105 (28.06) 1.670 (42.41)* 1.610 (40.89) NOTES: IS AFTER CALIBRATION **AFTER CALIBRATION DIM. NOT TO EXCEED .710 (18.03) FINISH: NICKEL PLATE GLASS SEAL ø .130 (3.30) .120 (3.04) .326 (8.28) .306 (7.77) STAINLESS COPPER CORED PIN .759 (19.27) .749 (19.02) Hermetic Compressor 16HM Overload WELDED ALL AROUND .536 (13.61) .516 (13.10) R .446 (11.33) .083 (2.10) START WDG 12R MAIN WDG 12R LOCATION AMBIENT START WDG 12R MAIN WDG 12R LOCATION AMBIENT START WDG 12R MAIN WDG 12R LOCATION AMBIENT START WDG 12R MAIN WDG 12R LOCATION AMBIENT RUNNING OVERLOAD (ULTIMATE TRIP) LIGHT LOAD LOCKED ROTOR RUN BOTH WINDINGS 130ºC 25ºC 0ºC 130ºC 25ºC 0ºC 16HM Heat Input Relationships S C R

www.sensata.com Page 3 Copyright © 2018 Sensata Technologies, Inc. 16HM Termination Styles Internal Geometry EPOXY SEALED WELDED.204 - .210 X .031 - .033 MALE QUICK CONNECT TERMINAL .247 - .253 x .031 - .033 MALE QUICK CONNECT TERMINAL .540 (13.71) .600 (15.24) EPOXY SEALED WHITE / W BLACK TRACER WHITE WHITE WIRED TRACER WELDED SLEEVE (REF.) .750 ±.125 (19.05 ±3.17) 1.255 ±.125 3.65 ±.250 (92.71 ±6.35 S S C C R R

www.sensata.com Page 4 Copyright © 2018 Sensata Technologies, Inc. 16HM CODE SYSTEM Example : 16HM XXX-YYY Product Family Electrical Characteristics Code Physical Configuration Code Element: Description Element: Description Element: Description 16HM (XXX) (YYY)

DEKRA (ENEC) 2018218.05 CQC CQC03002007249 AGENCY APPROVALS & CERTIFICATIONS Page 5 Rev:09/28/18 www.sensata.com CONTACT USCopyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Americas +1 (508) 236-2551 electrical-protection-sales@sensata. com Europe, Middle East & Africa +31 (74) 357 8156 info-sse@list.sensata.com Asia Pacific EP_Asia_Public@list.sensata.com China +86 (21) 2306 1651 Japan +81 (45) 277 7104 Korea +82 (53) 644 9685 India +91 (40) 4033 9611 Rest of Asia +65 (6478) 6860