16CTQ100S IRF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Bulletin PD-20192 rev. H 12/03 1www.irf.com This center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175°C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175° C TJ operation Center tap configuration Low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Description/ Features Case Styles 16CTQ...-1 TO-220 D 2PAK TO-262 16CTQ... 16CTQ...S 16CTQ...-1 Major Ratings and Characteristics IF(AV) Rectangular 16 A waveform VRRM 60 / 100 V IFSM @ tp = 5 µs sine 850 A VF @ 8 Apk, TJ = 125°C 0.58 V (per leg) TJ range - 55 to 175 °C Characteristics Values Units

Bulletin PD-20192 rev. H 12/03 www.irf.com 16CTQ060 16CTQ80 16CTQ100 16CTQ060S 16CTQ80S 16CTQ100S 16CTQ060-1 16CTQ80-1 16CTQ100-1 VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 60 80 100 Voltage Ratings Parameters Absolute Maximum Ratings Parameters Values Units Conditions IF(AV) Max. Average Forward (Per Leg) 8 A 50% duty cycle @ T C = 148°C, rectangular wave form Current * See Fig. 5 (Per Device) 16 IFSM Max. Peak One Cycle Non-Repetitive 850 5µs Sine or 3µs Rect. pulse Surge Current (Per Leg) * See Fig. 7 275 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 7.50 mJ T J = 25 °C, IAS = 0.50 Amps, L = 60 mH (Per Leg) IAR Repetitive Avalanche Current 0.50 A Current decaying linearly to zero in 1 µsec (Per Leg) Frequency limited by TJ max. VA = 1.5 x VR typical A TJ Max. Junction Temperature Range -55 to 175 °C Tstg Max. Storage Temperature Range -55 to 175 °C RthJC Max. Thermal Resistance Junction 3.25 °C/W DC operation to Case (Per Leg) RthJC Max. Thermal Resistance Junction 1.63 °C/W DC operation to Case (Per Package) RthCS Typical Thermal Resistance, Case 0.50 °C/W Mounting surface , smooth and greased to Heatsink (only for TO-220) wt Approximate Weight 2 (0.07) g (oz.) T Mounting Torque Min. 6 (5) Max. 12 (10) Thermal-Mechanical Specifications Kg-cm (Ibf-in) Parameters Values Units Conditions VFM Max. Forward Voltage Drop 0.72 V @ 8A (Per Leg) * See Fig. 1 (1) 0.88 V @ 16A

0.58 V @ 8A

0.69 V @ 16A

IRM Max. Reverse Leakage Current 0.55 mA T J = 25 °C (Per Leg) * See Fig. 2 (1) 7.0 mA T J = 125 °C VF(TO) Threshold Voltage 0.415 V TJ = TJ max. rt Forward Slope Resistance 11.07 mΩ CT Max. Junction Capacitance (Per Leg) 500 pF V R = 5VDC, (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 8.0 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10,000 V/ µs (Rated VR) TJ = 25 °C TJ = 125 °C Electrical Specifications (1) Pulse Width < 300µs, Duty Cycle <2% VR = rated VR Parameters Values Units Conditions Following any rated load condition and with rated V RRM applied

Bulletin PD-20192 rev. H 12/03 www.irf.com Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 100 1000 Ins t a nt aneous Forwa rd Current - I (A)F FM F or ward Voltage Dr op - V (V) T = 175°C T = 125°C T = 25°C J J J 0.0001 0.001 0.01 0.1 100 0 2 04 06 08 0 1 0 0 R R 150°C 125°C 100°C 75°C 50°C 25°C R evers e Current - I (mA) T = 175°CJ R evers e Voltage - V (V) 100 1000 0 2 04 06 08 0 1 0 0 T = 25°CJ R Junction Capacitance - C (pF )T R evers e Volta ge - V (V) 0.001 0.01 0.1 thJC t , R ectangular P uls e Duration (S econds ) S ingle Pulse (T hermal R es is tance) T hermal Impedance Z (°C/W) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 J DM thJC C PDM 1 2 Notes: 1. Duty factor D = t / t 2. Peak T = P x Z + T

Bulletin PD-20192 rev. H 12/03 www.irf.com Fig. 8 - Unclamped Inductive Test Circuit FREE- WHEEL DIODE 40HF L40S02C URRENT MONIT OR HIG H- SPEED S WIT CHIRFP460 L DUT R g = 25 ohm Vd = 25 Volt+ (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 10 V Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) 100 110 120 130 140 150 160 170 180 02468 1 0 1 2 1 4 DC Allowable Cas e T emperature - (°C) F( A V) s ee note (2) Sq u a r e w a v e ( D = 0 . 5 0 ) 80 % R ated V appliedR Average F orward Current - I (A) 02468 1 0 1 2 DC Average P ower L os s - (Watts ) F( A V) RM S Li m it D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Average F orward Current - I (A) 100 1000 10 100 1000 10000 FSMNon-Repetitive S urge Current - I (A) p At Any R ated Load Condition And With Rated V Applied Following S urge RRM S quare Wave P uls e Duration - t (micros ec)

Bulletin PD-20192 rev. H 12/03 www.irf.com 3.78 (0.15) 3.54 (0.14) 10.54 (0.41) MAX. DIA. 15.24 (0.60) 14.84 (0.58) 2.92 (0.11) 2.54 (0.10) TERM 2 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 0.94 (0.04) 0.69 (0.03) 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) MAX. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.48 (0.25) 6.23 (0.24) 0.10 (0.004) 1.40 (0.05) 1.15 (0.04) 2.89 (0.11) 2.64 (0.10) 2.04 (0.080) MAX. Conform to JEDEC outline TO-220AB Dimensions in millimeters and (inches) BASE COMMON CATHODE 123 ANODECOMMON CATHODE ANODE Outline Table 10.16 (0.40) REF. 8.89 (0.35) 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 6.18 (0.24)93° REF. 2.61 (0.10) 2.32 (0.09) 5.28 (0.21) 4.78 (0.19) 4.69 (0.18) 4.20 (0.16) 0.55 (0.02) 0.46 (0.02) 14.73 (0.58) 15.49 (0.61) 1.40 (0.055) 1.14 (0.045)3X 0.93 (0.37) 0.69 (0.27)2X 11.43 (0.45) 17.78 (0.70) 8.89 (0.35) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) MINIMUM RECOMMENDED FOOTPRINT Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) BASE COMMON CATHODE 123 ANODECOMMON CATHODE ANODE

Bulletin PD-20192 rev. H 12/03 www.irf.com Outline Table Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) BASE COMMON CATHODE 123 ANODECOMMON CATHODE ANODE Marking Information 16CTQ100S THIS IS A 16CTQ100S WITH LOT CODE 58 07 ASSEMBLED ON WW 21, 2000 IN THE ASSEMBLY LINE "L" ASSEMBLY LOT CODE INTERNATIONAL RECTIFIER LOGO PART NUMBER DATE CODE YEAR 0 = 2000 WEEK 21 LINE L

Bulletin PD-20192 rev. H 12/03 www.irf.com TRR FEED DIRECTION TRL FEED DIRECTION 10.90 (0.429) 15.90 (0.626) 1.75 (0.069) 1.25 (0.049) 1.85 (0.073) 1.65 (0.065) 4.10 (0.161) 3.90 (0.153) 1.60 (0.063) 1.50 (0.059) DIA. 1.60 (0.063) 1.50 (0.059) DIA. 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 4.72 (0.186) 4.52 (0.178) 24.30 (0.957) 23.90 (0.941) 0.368 (0.0145) 0.342 (0.0135) 360 (14.173) DIA. MAX. 26.40 (1.039) 24.40 (0.961) 13.50 (0.532) 12.80 (0.504) DIA. 60 (2.362) DIA. MIN. SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and TRR. Dimensions in millimeters and (inches) Tape & Reel Information Ordering Information Table Device Code 1 524 3 1 - Essential Part Number 2 - C = Common Cathode 3 - T = TO-220 4 - Q = Schottky Q Series 5 - Voltage Rating 6 - 1 = TO-262 S=D 2Pak

16 C T Q 100 -1

060 = 60V 080 = 80V 100 = 100V

Bulletin PD-20192 rev. H 12/03 www.irf.com IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/03 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. 16CTQ100 * SPICE Model Diode * .SUBCKT 16CTQ100 ANO CAT D1 ANO 1 DMOD (0.07089) *Define diode model .ENDS 16CTQ100 Thermal Model Subcircuit .SUBCKT 16CTQ100 5 1 CTHERM1 5 4 1.45E+00 CTHERM2 4 3 4.54E+00 CTHERM3 3 2 1.09E+01 CTHERM4 2 1 1.01E+02 RTHERM1 5 4 2.49E+00 RTHERM2 4 3 5.20E-04 RTHERM1 3 2 5.43E-01 RTHERM1 2 1 3.05E-02 .ENDS 16CTQ100