BLA0007 BALLUFF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
BLA 16C-002-00,25-S75 Order Code: BLA0007 Internet www.balluff.com eCl@ss 9.1: 27-27-08-01 Subject to change without notice: 267388 ETIM 6.0: BLA0007_0.29_2021-04-01 1) Emitter, 2) Receiver, 3) Status indicator, 4) Indicator object Basic features Approval/Conformity CE WEEE EAC Basic standard IEC 60947-5-2 Principle of operation Light array Scope of delivery Mounting bracket (2x), BAM0362 Connection cable (emitter - receiver) Manual Series C Style Square Straight connection Display/Operation Adjuster Configuration via IO-Link Display LED green: Power Communication - Green LED, flashing Object in meas. field - LED orange Setting Normalize CCD signal Teach in objects (max. 6) Factory setting (Reset) Meas.field limits Object mode (digital values) Measurement mode (2 independent measurement values) Setting block Blanking Signal scaling Counter mode
BLA 16C-002-00,25-S75 Order Code: BLA0007 Internet www.balluff.com eCl@ss 9.1: 27-27-08-01 Subject to change without notice: 267388 ETIM 6.0: BLA0007_0.29_2021-04-01 Electrical connection Cable diameter D 4.5...6 mm Cable length L 250 mm Connection Cable with connector, M8x1-Male, 4-pin, 250 mm, PUR Connection 2 M8x1-Female, 4-pin Connection 3 M8x1-Male, 4-pin Contact, surface protection Gold plated Polarity reversal protected yes Protection against device mix-ups yes Short-circuit protection yes Electrical data No-load current Io max. at Ue 100 mA Operating voltage Ub 18...30 VDC Rated insulation voltage Ui 75 V DC Rated operating voltage Ue DC 24 V Ready delay tv max. 300 ms Ripple max. (% of Ue) 10 % Environmental conditions Ambient temperature 5...55 °C EN 60068-2-27, Shock Half-sinus, 30 g , 11 ms, 3x6 EN 60068-2-6, Vibration 30 g, 10…2000 Hz IP rating IP67 Functional safety MTTF (40 °C) 253 a Material Housing material Aluminum, Anodized Housing material, surface protection Anodized Material jacket PUR Material sensing surface Glass Surface protection Anodized Mechanical data Dimension 38 x 20 x 68.3 mm Mounting part Screw M4 Optical features Ambient light max. 5000 Lux Average power Po max. 150 µW Beam characteristic Collimated light strip, width 20 mm Laser class per IEC 60825-1 1 Light type Laser red light Principle of optical operation Through-beam sensor Pulse frequency 0.01…1 kHz Pulse power Pp max. 0.3 mW Smallest part typ. Wire Ø 0.4 mm at R0 ≤ 0.25m Wire Ø 0.7 mm at R0 ≤ 1m Wire Ø 1.0 mm at R0 ≤ 2m Special optical feature CCD technology Wave length 650 nm Output/Interface Baud rate COM2 (38.4 kBaud) Interface IO-Link 1.1 Range/Distance Accuracy ±20 µm (R0 ≤0.25m) 50 µm (R0 ≤1m) 100 µm (R0 ≤2m) Active length AL 1 16 mm Range 0...2 m Rated operating distance Sn 2 m Repeat accuracy 10 µm (R0 ≤ 0.25 m) 20 µm (R0 ≤ 1 m) 70 µm (R0 ≤ 2 m) Resolution ≤ 0.01 mm Remarks Reference object (target): Steel cylinder diameter 8.0 mm. The sensor is functional again after the overload has been eliminated. Connection cable (emitter to receiver) and mounting bracket BAM0362 included, order other accessories separately. For additional information, refer to user's guide. For more information about MTTF and B10d see MTTF / B10d Certificate Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way. n
BLA 16C-002-00,25-S75 Order Code: BLA0007 Internet www.balluff.com eCl@ss 9.1: 27-27-08-01 Subject to change without notice: 267388 ETIM 6.0: BLA0007_0.29_2021-04-01 Connector Drawings Wiring Diagrams Opto Symbols Warning Symbols LASER CLASS 1 per IEC 60825-1