1689 IET | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Long Island, NY IET LABS, INC. in the GenRad T radition www.ietlabs.com TEL: (516) 334-5959 • EMAIL: info@ietlabs.com Precision Impedance Meter 1689 & 1689M RLC DigibridgeTM Page 1 of 3

1689 RLC Digibridge

Features:

  • The world's de facto standard for ac resistance, low-frequency inductance, and capacitance measurement
  • 0.02% accuracy for R, L, and C
  • 0.0001 accuracy for Dissipation and Q
  • 5 Impedance Parameters
  • Programmable test frequencies from

12 Hz to 100 kHz for testing versatility

  • Programmable test voltages from 5 mV to 1.275 V
  • Dual display featuring 5-digit readout for RLC and 4-digit readout for D and Q
  • Extremely reliable: over 30 years of history
  • Optional IEEE-488 interface available
  • Built-in 4-terminal, shielded kelvin fixture for testing axial and radial components while protecting measurement integrity

1689 Datasheet/04-03-2013

Rear view of 1693 RLC Digibridge with optional IEEE-488 interface Applications:

  • Metrology Laboratories
  • Laboratory Component Analysis
  • Material Measurement
  • Quality Assurance
  • Research and Development
  • Direct measurements and transfers The GenRad 1689 Precision Im - pedance Meter gives you the best performance for your most demand- ing applications, whether they be production testing, incoming inspec- tions, component design and evalu- ation, process monitoring or dielec - tric measurements. It is a versatile, full-function, microprocessor-based passive component tester. 1689M RLC Digibridge An alternative unit configuration, the 1689M shown above, offers 4 bnc connection terminals in place of the shielded kevin fixture and comes with bnc-to-bnc extender cable. The 1689M is easy to rack mount with an optional Rack Mount Kit (1689-9611) also available from IET Labs. The 1689 and the 1689M RLC Digi- bridge is controlled by a micropro - cessor, allowing for many automated functions including:
  • testing
  • parameter selection
  • test frequency and voltage se - lection
  • limit comparison
  • binning
  • zeroing The automated capabilities of this meter can be further extended with the addition of an optional IEEE- 488 interface (shown on the left), which allows for remote operation, programming, and data acquisition.

Long Island, NY IET LABS, INC. in the GenRad T radition www.ietlabs.com TEL: (516) 334-5959 • EMAIL: info@ietlabs.com Precision Impedance Meter 1689 & 1689M RLC DigibridgeTM Page 2 of 3 SPECIFICATIONS Ranges: Parameter Direct Reading Range Ratio and DQ in PPM R 0.00001 Ω to 99999 kΩ 0.00010 Ω to 9999.9 GΩ L 0.00001 mH to 99999 H 0.00010 nH to 9999.9 MH C 0.00001 pF to 99999 µF 0.00010 aF to 9999.9 F R with C 0.0001 Ω to 9999 kΩ not extended D with C 0.0001 to 9999 1 to 9999 ppm Q with R or L 0.0001 to 9999 1 to 9999 ppm Measurement parameters: R/Q, L/Q, C/D, or C/R (series or parallel Parameter selection: Auto parameter (RLC) with manual selection Accuracy: Basic RLC: ±0.02% Basic QD: ±0.0002 (±0.0001 in PPM mode) For more information on calculating accuracy, visit IET website for the 1689 accuracy calculations: http://www.ietlabs.com/notes/ digibridge_accuracy_calculator Test frequencies: Range: Over 500 selectable test frequencies ranging from 12 Hz to 100 kHz Accuracy: 0.01% Binning: Pass bins: 13 pass bins for RLC Fail bins: 2 fail bins, RLC & DQR

1689 Keyboard

1689 Display

Sorting capabilities: Bin number, Delta RLC, Delta %, Value Applied voltage: 5 mV to 1.275 V (programmable in 5 mV steps) Bias: Internal: 2.0 Vdc External: 60 Vdc max Range selection: Autoranging with manual hold Measurement mode: Continuous or triggered, with averaging of up to 256 measurements Measurement speed: Up to 19 measurements per second Display format: Dual display featuring 5 full digit LED for RLC and 4 full digit LED's for DQ Automatically positioned decimal points and minus signs where appropriate Individual LED indicators for parameters, and measurement units Interfaces: Optional IEEE-488.2 with updated SCPI commands General features: Charged capacitor protection (1 joule) Keyboard lock (protects test conditions) Constant voltage mode (25 source) Programmed delay (1 to 99,999 ms) DQ in ppm Bin count summary Programmed integration time Median value Power: 90-250 Vac 50-60 Hz

60 W max

Environmental conditions: Operating conditions: 0° to +50°C, <85% RH Storage conditions: -45°C to +75°C

1689 Datasheet/09-20-2012

Long Island, NY IET LABS, INC. in the GenRad T radition www.ietlabs.com TEL: (516) 334-5959 • EMAIL: info@ietlabs.com Precision Impedance Meter 1689 & 1689M RLC DigibridgeTM Page 3 of 3

ORDERING INFORMATION

Remote Test Fixture 1689-9600 (A radio-axial connection for 1689M) OPTIONAL ACCESSORIES:

1689 RLC Digibridge standard set:

Calibration certificate traceable to SI Instruction manual Kelvin Test Leads 1700-03 Chip Component Tweezers 7000-05 Alligator Clip Leads, 1 Meter 7000-04 (May also be used as bnc-to-banana-plug con- nector) bnc-bnc Extender Cable, 2-Meter 1689-9602-2 Rackmount Kit 1689-9611 IEEE Digibridge Interface 1689-9640 Digibridge Calibration Kit 1689-9604 1657-9600 Banana-Plug Extender Cable 1689M RLC Digibridge standard set:

1693 RLC Digibridge

Extender cable, bnc-to-bnc (1-meter long) Power cable Calibration certificate traceable to SI Instruction manual Digibridge BNC Adaptor 1689-9601 (A bnc interface for 1689)