168104J50A-F CDE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Type 168/185 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors for Automatic Insertion Highlights The Type 168/185 series radial lead metallized polyester box capacitors are available in bulk (Type 168) or on ammo pack or tape and reel (Type 185). These capacitors are constructed in rugged rectangular plastic cases and all come with 5.0 mm (0.197“) lead spacing. They are good for general purpose applications such as bypass, decoupling, energy storage/discharge and arc suppres- sion.

  • Case and epoxy fill meets UL94V-0
  • 5.0 mm (0.197“) lead spacing
  • Bulk, tape and reel or ammo pack
  • Non-inductively wound
  • Non-polar
  • Low leakage
  • Lead material: Tinned copper wire Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric Withstand Voltage: Dissipation Factor (DF): RoHS Compliant 0.001 µF to 1.0 µF

50 Vdc to 400 Vdc (30 Vac to 200 Vac, 60 Hz)

±5%, ±10%, ±20% –55 ºC to +125 ºC (with 50% Vdc derating >85 ºC) 1.6 x rated voltage for 2 sec @ +25 ºC ±5 ºC tanδ x 10 –4 at 25 ºC ±5 ºC kHz C ≤0.1 µF C > 0.1 µF 1 ≤100 ≤100 10 ≤150 ≤150 100 ≤300 Total Self Inductance (L): Approximately 7 nH Long Term Stability (after two years): Capacitance change ∆C/C ≤ ±3% under stan- dard environmental conditions Maximum Pulse Rise Time (dv/dt): Vn V/µs 50 250 63 250 100 300 250 400 400 600 If the working voltage (V) is less than the nominal voltage (Vn), the capacitor can work at higher dv/dt. In this case, the maximum value allowed is obtained by multiplying the above value with the ratio Vn/V. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Type 168/185 Metallized Polyester Radial Lead Capacitors Capacitor Outline Drawing Test Method and Performance L T Max Max H Max .217 ±.039 (5.5 ±1.0 mm) Ød ±.002 S (±0.05) ±.015 (±0.4 mm) Lead length shown is as supplied on the 168 Series Soldering Test Conditions Soldering Temperature: 260 ºC ±5 ºC Soldering Duration: 10 sec ±1 sec Performance Capacitance Change ∆C/C: ≤ ±2% DF Change ∆tgδ: ≤30 x 10–4 at 10 kHz Insulation Resistance: ≥ limit value Insulation Resistance Test Conditions Temperature: 25 ºC ±5 ºC Voltage Charge Time: 1 minute Voltage Charge: 10 Vdc for Vn < 100 Vdc

100 Vdc for Vn ≥ 100 Vdc

For Vn > 100 Vdc: C ≤ 0.33 µF, ≥15,000 MΩ C > 0.33 µF, ≥ 5,000 S For Vn ≤100 Vdc: C ≤ 0.33 µF, 30,000 MΩ C > 0.33 µF, ≥ 10,000 S Damp Heat Test Test Conditions Temperature: +40 ºC Relative Humidity: 95% Test Duration: 21 days Performance Capacitance Change ∆C/C: ±5% DF Change ∆tgδ: ≤ 0.005 (10 KHz) Insulation Resistance: ≥ 50% of limit value Life Test Test Conditions REF Temperature: +85 ºC Test Duration: 2000 hrs Voltage Applied: 1.25 x Vn Performance Capacitance Change ∆C/C: ≤ ±2% DF Change ∆tgδ: ≤30 x 10–4 at 10 kHz Insulation Resistance: ≥ 50% of limit value Ratings RoHS Compliant Catalog Part Number Tape & Reel Ammo Pack Cap (µF) Inches Millimeters L T H S Ød L T H S Ød

50 Vdc / 30 Vac

63 Vdc / 40 Vac

  • Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20% # Indicates packaging type: R = Tape and Reel, A = Ammo Pack > Indicates tooling code: A = 16.5 mm, B = 18.5 mm (See H dimension in taping specifications) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Type 168/185 Metallized Polyester Radial Lead Capacitors RoHS Compliant Catalog Part Number Tape & Reel Ammo Pack Cap (µF) Inches Millimeters L T H S Ød L T H S Ød

100 Vdc / 63 Vac

250 Vdc / 160 Vac

400 Vdc / 200 Vac

  • Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20% # Indicates packaging type: R = Tape and Reel, A = Ammo Pack > Indicates tooling code: A = 16.5 mm, B = 18.5 mm (See H dimension in taping specification) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Type 168/185 Metallized Polyester Radial Lead Capacitors Tape Specification - 5.0 mm Lead Spacing Item Code Millimeters Inches Standard EIA-468-B Feed Hole Pitch P0 12.7±0.3 .5±.012 Pitch of Component P1 12.7±1.0 .5±.039 Hole Center to Lead P2 3.85±0.7 .152±.028 Feed Hole Center to P3 6.35±1.3 .250±.051 Component Center Component Alignment, F-R ∆h 0±2.0 0±.079 Hold-down Tape Width W0 6.0 min .236 min Hold-down Tape Position W2 3.0 Max .118 Max Height of Component H > > from Tape Center Feed Hole Diameter D0 4.0±0.3 .157±.012 Case Thickness Quantity Quantity T Reeled Ammo Pack 2.5 2500 2000 3.5 1800 1500 4.5 1400 1300 5 1200 1000 6 1000 800 > The H dimension depends on the insertion equipment used. Specify the proper tooling code as indicated below. Tooling H Dimensions Code Millimeters Inches A B 16.5±0.75 18.5±0.75 .679±0.030 .728±0.030 Part Numbering System for Auto Insertion 168/185 104 K 100 R H B –F Packaging *Tooling RoHS Type Internal Code Compliant Series Capacitance Tolerance Voltage (#) Code (>) Designation 185 102 = .001 µF J = ±5% 50 = 50 Vdc A = Ammo Letter A 103 = .01 µF K = ±10% 63 = 63 Vdc R = Tape & Reel B 104 = .1 µF M = ±20% 100 = 100 Vdc 105 = 1.0 µF 250 = 250 Vdc 400 = 400 Vdc * Tooling code (>) depends on the users insertion equipment requirements. See table for available options. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com