167683J63A-F CDE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Type 167/184 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors for Automatic Insertion Specifications The Type 167/184 series radial lead metallized polyester box capacitors are available in bulk (Type 167) or on ammo pack or radial tape and reel (Type 184). These capacitors are constructed in rugged rectangular plas- tic cases and all come with 7.5 mm (0.3”) lead spacing. They are good for general purpose applications such as bypass, decoupling, energy storage/discharge and arc suppression. Highlights

  • Rugged plastic case
  • Case and epoxy fill meets UL94V0
  • 7.5 mm (0.3”) lead spacing
  • Bulk, tape and reel or ammo pack
  • Non-inductively wound
  • Non-polar RoHS Compliant Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric Withstand Voltage: Dissipation Factor (DF): Total Self Inductance (L): Maximum Pulse Rise Time (dv/dt): 0.001 µF to 1.0 µF

63 Vdc to 630 Vdc (40 Vac to 250 Vac, 60 Hz)

±5%, ±10%, ±20% –55 ºC to +125 ºC (with 50% Vdc derating >85 ºC) 1.6 x rated voltage for 2 sec @ +25 ºC ±5 ºC tanδ x 10–4 at 25 ºC ±5 ºC kHz tanδ x 10–4 1 ≤100 10 ≤150 Approximately 8 nH Vn V/µs 63 12 100 20 250 32 400 41 630 70 If the working voltage (V) is less than the nominal voltage (Vn), the capacitor can work at higher dv/dt. In this case, the maximum value allowed is obtained by multiplying the above value with the ratio Vn/V. Long Term Stability (after two years) Storage Standard Environmental Conditions Performance Capacitance Change ∆C/C ≤ ±3% CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Type 167/184 Metallized Polyester Radial Lead Capacitors Capacitor Outline Drawing Test Method and Performance L T Max Max H Max .217 ±.039 (5.5 ±1.0 mm) S Ød ±.002 ±.015 (±0.05) (±0.4 mm) Lead length shown is as supplied on 167 Series Insulation Resistance Test Conditions Temperature 25 ºC ±5 ºC Voltage Charge Time 1 minute Voltage Charge 50 Vdc for Vn < 100 Vdc

100 Vdc for Vn ≥ 100 Vdc

For Vn > 100 Vdc ≥30,000 MΩ (50,000 MΩ typical) For Vn ≤100 Vdc ≥10,000 MΩ for C ≤ 0.1µF ≥1,000 MΩ x µF for > 0.1µF Damp Heat Test Test Conditions Temperature +40 ºC Relative Humidity 95% Test Duration 21 days Performance Capacitance Change ∆C/C ≤ ±5% DF Change ∆tgδ ≤50 x 104 at 1 kHz Insulation Resistance ≥ 50% of limit value Life Test Test Conditions Temperature +85 ºC Test Duration 1000 hrs Voltage Applied 1.25 x Vn Performance Capacitance Change ∆C/C ≤ ±5% DF Change ∆tgδ ≤30 x 10–4 at 10 kHz Insulation Resistance ≥ 50% of limit value Soldering Test Conditions Soldering Temperature 260 ºC ±5 ºC Soldering Duration 10 sec ±1 sec Performance Capacitance Change ∆C/C ≤ ±2% DF Change ∆tgδ ≤30 x 10–4 at 10 kHz Insulation Resistance ≥ limit value Ratings RoHS Compliant Cap (µF) Catalog Part Number Tape & Reel Ammo Pack Inches Millimeters L T H S Ød L T H S Ød

63 Vdc / 40 Vac

100 Vdc / 63 Vac

  • Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20% # Indicates packaging type: R = Tape and Reel, A = Ammo Pack > Indicates tooling code: A = 16.5 mm, B = 18.5 mm, C = 16.0 mm (See H dimension in taping specifications) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

(µF) Catalog Part Number Tape & Reel Ammo Pack Inches Millimeters L T H S Ød L T H S Ød Type 167/184 Metallized Polyester Radial Lead Capacitors Cap (µF) Catalog Part Number Tape & Reel Ammo Pack Inches Millimeters L T H S Ød L T H S Ød

250 Vdc / 160 Vac

400 Vdc / 200 Vac

630 Vdc / 220 Vac

  • Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20% # Indicates packaging type: R = Tape and Reel, A = Ammo Pack > Indicates tooling code: A = 16.5 mm, B = 18.5 mm, C = 16.0 mm (See H dimension in taping specification) Part Numbering System for Bulk Items 167 104 K 100 A -F Case RoHS Series Capacitance Tolerance Voltage Code Compliant 167 392 = .0039 µF J = ±5% 63 = 63 Vdc A Designator 103 = .01 µF K = ±10% 100 = 100 Vdc B 104 = .1 µF M = ±20% 250 = 250 Vdc C 105 = 1.0 µF 630 = 630 Vdc D CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Type 167/184 Metallized Polyester Radial Lead Capacitors Tape Specification - 7.5 mm Lead Spacing 30 mm 280 mm Max 11.02” 335 mm Max 13.19” 47 mm Max 1.85” Ammo Box Packing Reel Packing 1.18” 331 mm 13.04” ΔH Po P Do Ød W H Wo Item Code Millimeters Inches Feed Hole Pitch P0 2.7±0.3 .5±.012 Pitch of Component P1 12.7±1.0 .5±.039 Hole Center to Lead P2 8.95±0.7 .352±.028 Component Alignment, F-R ∆h 0±2.0 0±.079 Hold-down Tape Width W0 6.0 min .236 min Hold-down Tape Position W2 3.0 Max .118 Max Height of Component H > > from Tape Center Feed Hole Diameter D0 4.0±0.3 .157±.012 Case Quantity Quantity Code Reeled Ammo Pack A 1800 1500 B 1500 1500 C 1200 1000 D 1000 1000 > The H dimension depends on the insertion equipment used. Specify the proper tooling code as indicated below. Tooling H Dimensions Code Millimeters Inches C 16.0±0.75 .630±030 Part Numbering System for Auto Insertion 184 104 K 100 R A B -F Packaging *Tooling RoHS Type Case Code Compliant Series Capacitance Tolerance Voltage (#) Code (>) Designator 184 392 = .0039 µF J = ±5% 63 = 63 Vdc A = Ammo A A 103 = .01 µF K = ±10% 100 = 100 Vdc R = Tape & Reel B B 104 = .1 µF M = ±20% 250 = 250 Vdc C C 105 = 1.0 µF 630 = 630 Vdc D * Tooling code is at the discretion of the user depending on the insertion equipment being used. See table for specific "H" dimensions * Tooling code (>) depends on the users insertion equipment requirements. See table for available options. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com