16606 EKTOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Designed to withstand wear and tear with impact rating of IK09 (front) and IK08 (side) rating Suitable for outdoor use in harsh weather conditions with an IP65 rating Self-test monitoring systems (AS2293/IEC62034) to reduce building load Long-life electronics with 12 years at max. ambient High quality Lithium battery (LiFePO4) and smart charger Comes with maintained and non-maintained operating modes Prevent battery damage and reduce building load with a soft start charger DALI monitored and standalone system
ORDERING INFORMATION
Description Boxit Pro IP65 Wallmount Exit Light - 24M Driver Type DALI DT1 Emergency Item Code EV-BOXIT-IP65-24M-PRO-DA MECHANICAL Body Material Polycarbonate Diffuser Material Polycarbonate Fitting Colour Grey IK Rating IK09 Installation Type Surface mount IP Rating IP65 ELECTRICAL Electrical Rating Class I Input Frequency 50 Hz Input voltage 230Vac In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6% Standby Power 2.2 W Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge. System Max Wattage 2.5 W Working Temp Range 0 to 40 °C DRIVER Driver Type DALI DT1 Emergency Wiring Type Re-wireable terminal block (5 pin) EMERGENCY (EM SUFFIX) Replacement Battery Code 01302 Emergency Classification CO:E2.5, C90:E2 Decal Size 360x170 mm Emergency Duration 90 mins Emergency Light Source Life 24Y/10M AS2293.3-2018 Projection of Light source life for LED Exit signs (appendix E) Defines the projected time until the surface luminance falls below the minimum required surface luminance for an exit sign. Emergency Lumen Output 30 lm Emergency Mode Maintained Emergency Output Power 1200 mW Viewing Distance 24 m 1300 438 658 sales@evolt.com.au ektor.com.au © 2025 Evolt Generated on 5th of February 2025 03:24:00 - Page 1
Product Design Life 12 years The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use. Daily Use 24 hrs The Daily Use is the recommended time required to meet the product's design life. Installations can exceed this time, however the product design life will be reduced proportionally. Standards AS/NZS 60598.1 AS 60598.2.22 AS/NZS 61347.1 AS/NZS 61347.2.13 AS CISPR 15 AS/NZS 2293.3 WARRANTY Commercial Use Warranty 8 RTB (Total 8 Years) DIMENSIONS Product Height 95 mm Product Length 370 mm Product Width 190 mm LINE DRAWINGS EV/BOXIT/IP65/24M/PRO/DA PHOTOMETRICS EV/BOXIT/IP65/24M/PRO Powered by TCPDF (www.tcpdf.org) Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 5th of February 2025 03:24:00 - Page 2