1650110 TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
■BDS power block with two connected sensors and LEDs ■Robust rotatable connector 0°, 45° and 90°, for optimal cable routing ■Plastic, Trogamid ■Resistant to magnetic fields (weld-resistant), for DC and AC fields up to 100 mT ■2 x NO contact, PNP output ■DC 4-wire, 10…30 VDC Wiring diagram Functional principle TURCK offers special monitoring kits, consisting of two miniature sensors, as a convenient solution for "Open/Closed" detection on pneumatic power clamps. This product line provides almost unlimited combination possibilities, comprising four different power blocks and over 40 different modular sensor types.
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|2 NI2-Q6.5-0.16-BDS-2AP6X3-H1141/S34 | 11/07/2023 13-52 | technical changes reserved Technical data Switching frequency 0.03 kHz Mechanical data Design Monitoring kit for power clamps, Q6,5 Dimensions 47 x 18 x 18 mm Housing material Metal, Trogamit Active area material Plastic, PP GR-20 Electrical connection Connector, M12 × 1 Cable quality Ø 2 mm, Gray, Lif9Y-11Y, PUR, 0.16 m Core cross-section 3 x 0.08 mm Litz wire 40 x0.05 mm Environmental conditions Ambient temperature -25…+70 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP67 MTTF 2283 years acc. to SN 29500 (Ed. 99) 40 Power-on indication LED, Green Switching state 2 × LEDs, Yellow/red Included in delivery Screw M5 x 25 DIN 912 Mounting instructions Mounting instructions/Description Distance D 3 x B Distance W 3 x Sn Distance S 1.5 x B Distance G 6 x Sn Distance N 2 x Sn Width active area B 6.5 mm Please note, non-flush mounting of this sensor is obligatory. The following conditions allow semi-flush mounting: N1 = 0 mm and S1 = 1 mm or N1 = 1 mm and S1 = 0 mm These values apply for mounting in aluminium N1 = 0 mm and S1 = 5 mm or N1 = 5 mm and S1 = 0 mm These values apply for mounting in St37.