165-26

67-06E AIO | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 10

Technical content

Amphenol 67 and 165 Series Miniaturized Standard Connectors 12-023-6 Amphenol

Table of Contents Page No. Amphenol® 67 Series “Minni E” Amphenol® 165 Series - Miniaturized MIL-C-5015 Sales Office Listing

E P J C * RATING - “B” rating is for insert 14-5 which takes a higher voltage; “A” rating is for other inserts. TYPICAL FLASHOVER VOLT AGES A T ST ANDARD CONDITIONS (unsealed) Refers to connectors with no provisions for sealing front or rear areas. (sealed) Refers to connectors that are potted or pressurized in mounting, with front and rear areas sealed. Voltage Rating Rating Mechanical Spacing (Nominal) Flashover V-RMS* Test V-RMS* Recommended Working Voltage DC AC Sea Level (unsealed) A B .034 .046 2,000 2,300 1,500 1,800 700 840 500 600 Sea Level (sealed) A B .034 .046 2,500 3,000 2,000 2,500 700 840 500 600 70,000 ft. (unsealed) A B .034 .046 500 600 375 450 175 210 125 150 70,000 ft. (sealed) A B .034 .046 2,500 3,000 1,500 1,800 700 840 500 600 Amphenol 67 Series “Minni E” environmental resistant cylindrical connectors DESIGN CHARACTERISTICS

• Approximately half the weight of standard cylindricals  Quick, positive, stainless steel bayonet coupling  Operating temperatures from -67°F to +257°F per MIL-C-5015  Sealed connectors capable of 1500 VRMS at 70,000 ft. altitude  Vibration resistance of 10 to 2,000 cps at 20Gs  Interfacial seal of neoprene rubber with individual contact barriers  Moisture resistance exceeds MIL-C-5015 require- ments with potting  UL approved recognition file E115497 CUSTOMER OPTIONS  Five shell styles  Choice of unitized back end grommet or provision for potting  Seventeen insert configurations  Four construction classes available: E - with unitized grommet for individual wire seal P - includes potting mold J - sealing clamp for jacketed cable C - vise action with two-screw strain relief Shell components are fabricated from high grade aluminum with gray anodize finish and stainless steel bayonet pins and slots. Contacts are copper alloy gold over nickel plate. Inserts are diallyl phthalate, providing high arc and insula- tion resistance under both humidity and thermal stress con- ditions. Positive locking action is provided by the spring- loaded coupling ring. Amphenol ® 67 Series connectors are ideal for applications that require a light to medium weight, durable, environmen- tally sealed connector. For additional information on Amphenol ® 67 Series connec- tors, or for special application requirements, contact your local sales office, authorized distributor, or Amphenol Corporation Amphenol Aerospace 40-60 Delaware Avenue Sidney, New Y ork 13838-1395 Phone: 607-563-5011 Fax: 607-563-5157 www.amphenol-aerospace.com Amphenol Aerospace is a certified ISO 9001 manufacturer.

67 Series

NOTE: All dimensions for reference only. Mounting Dimensions (For all 67 Series square flange connectors) Connector Size AB Suggested Mounting Hole 12 .812 1.031 .700 14 .906 1.125 .822 18 1.062 1.312 1.072 20 1.156 1.437 1.197 22 1.250 1.562 1.291

67-02E 67-03E Mounting Hole Connector Size ABC Connector Size ABEF 67-06P 67-06E 67-06J 67-06C 67-01P 67-01E 67-00C 67-01C 67-00P 67-00E NOTE: All dimensions for reference only. Connector Size ABCDE FGHJK

Insert Arrangement 22-67 22-48 22-68 22-69 Number of Contacts 25 48 36 2 40 2 Contact Size 16 20 20 16 20 16 Current rating - #20 contact: 7.5 amps, #16 contact: 12 amps Shielded contact: 7.5 amps front face of insert illustrated Insert Arrangement 12-7 12-60 14-5 14-9 14-12 Number of Contacts 7 3 5 9 12 Contact Size 20 16 20 20 20 Insert Arrangement 14-61 14-63 18-24 18-62 Number of Contacts 8 5 24 19 Contact Size 20 16 20 20 plus 1 shielded contact plus 1 shielded contact Insert Arrangement 18-64 18-65 20-37 20-66 Number of Contacts 14 7 4 37 19 Contact Size 16 20 16 20 16

Alternate Insert Positions Size Size Size 12 14 18, 20, 22 No letter X W Front of socket and rear of pin insert Amphenol® 67 Series “Minni E” Connectors can be ordered by coded part number. Ordering procedure is illustrated by part number 67-06E12-7PW-100 as shown below: 6 7–0 6 E 1 2–7 P W – 1 0 0 Series Designation Shell Style Construction Insert Arrangement T ype of Contact Alternate Insert Positions Deviations Series Designation 67 – Shell Style 00 - Wall mounting receptacle 01 - Cable mounting receptacle 02 - Panel mount receptacle 03 - Rear panel mount, round flange receptacle 06 - Cable plug - straight Construction E Environmentally sealed (Unitized grommet) P Environmentally sealed (Disposable polyethylene potting form furnished) J Sealing clamp for jacketed cable (Waterproof) C Mechanical Clamp (Sealed only when potted) Insert Arrangement See available insert arrangements, page 4 Type of Contact P - Pin S - Socket Deviations 100 - 100 µin. gold over silver contacts 106 - Pretinned solder wells 113 - Aluminum parts iridite finish

miniaturized standard connectors DESIGN CHARACTERISTICS  Approximately one-third the size and weight of standard MIL-C-5015 connectors  Quick, positive, bayonet coupling  O-ring seals in both plugs and receptacles make connectors pressure proof and water protected when mated  Meets pressure seal requirements of MIL-C-5015, Class C construction  UL approved recognition file E115497 CUSTOMER OPTIONS  Five shell styles in two sizes - large and small  Seven insert configurations Shell components are fabricated from high grade aluminum with gray anodize finish. Contacts are copper alloy gold over nickel plate. Inserts are diallyl phthalate, providing high arc and insulation resistance under both humidity and thermal stress conditions. Connectors using female inserts feature a sandwich construction with the insert spun into a cartridge. Connectors are factory sealed to prevent leakage. Amphenol ® 165 Series connectors are ideal for applications that demand a lightweight connector that meets MIL-C-5015 requirements. For additional information on Amphenol ® 165 Series con- nectors, or for special application requirements, contact your local sales office, authorized distributor, or Amphenol Corporation Amphenol Aerospace 40-60 Delaware Avenue Sidney, New Y ork 13838-1395 Phone: 607-563-5011 Fax: 607-563-5157 Amphenol Aerospace is a certified ISO 9001 manufacturer. Connector Weights Style Weight (pounds) Small Large Cable receptacle for potting 0.0415 0.0599 Cable receptacle 0.0600 0.0945 Panel receptacle 0.0264 0.0439 Plug 0.0659 0.0975 Plug for potting 0.0302 0.0490

165 Series

Cable Receptacle Cable Plug Potting Construction * 165-33 and 165-34 have cable opening of .281 NOTE: All dimensions for reference only ABCDEFGH

Sq. Flange Cable Receptacle Potting Constructions Plug Receptacle 5 #20 contacts Current Rating (Amperes) 7.5 Pin 165-33 165-35 165-35-1002 165-33-1000 165-35-1000 Voltage rating (Volts RMS at sea level) 600 Socket 165-34 165-36 165-36-1003 165-34-1000 165-36-1000 9 #20 contacts Current Rating (Amperes) 7.5 Pin 165-13 165-15 165-15-1002 165-13-1000 165-15-1000 Voltage rating (Volts RMS at sea level) 500 Socket 165-14 165-16 165-16-1003 165-14-1000 165-16-1000 8 #20 contacts,

1 Shielded contact

(Amperes) 10.0 Pin 165-82 165-73 165-73-1001 165-82-1000 165-73-1000 Voltage rating (Volts RMS at sea level) 500 Socket 165-61-1008 165-83 165-83-1001 165-61 165-83-1000 12 #20 contacts Current Rating (Amperes) 7.5 Pin 165-9 165-11 165-11-1002 165-9-1000 165-11-1000 Voltage rating (Volts RMS at sea level) 500 Socket 165-10 165-12 165-12-1002 165-10-1000 165-12-1000 14 #16 contacts Current Rating (Amperes) 17.0 Pin 165-29 165-31 165-31-1003 165-29-1000 165-31-1000 Voltage rating (Volts RMS at sea level) 500 Socket 165-30 165-32 165-32-1006 165-30-1000 165-32-1000 19 #20 contacts, (Amperes) 10.0 Pin 165-86 165-84 165-84-1001 165-86-1000 165-84-1000 Voltage rating (Volts RMS at sea level) 500 Socket 165-62-1007 165-85 165-85-1001 165-62 165-85-1000 24 #20 contacts Current Rating (Amperes) 7.5 Pin 165-25 165-27 165-27-1005 165-25-1000 165-27-1000 Voltage rating (Volts RMS at sea level) 500 Socket 165-26 165-28 165-28-1003 165-26-1000 165-28-1000 insert arrangements, order information front face of insert illustrated The following chart provides ordering information. For example, to order a 165 Series plug with pin contacts use part number 165-33.