1649399-1 | DigiCamel IC Datasheet

Online Datasheet

Read 1649399-1 online.

1440002-8 TEC | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 3

Technical content

04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. OEG General Purpose Relays PCB Relays n 1pole, 16A, 1 form A(NO) or 1 form C (CO) n UL TV-8 (OZT) available n Meet 5000V dielectric voltage between coil and contacts n Meet 10000V surge voltage between coil and contacts Typical applications Home appliances, office machines Approvals UL E58304, CSA LR48471, TuV R50139112, CQC 03001007810 Technical data of approved types on request Contact Data Contact arrangement 1 form A (NO), 1 form C (CO) Rated voltage 240VAC Max. switching voltage 24VDC, 240VAC Rated current 16A Switching power 3840VA, 380W Contact material AgSnO Min. recommended contact load 100mA, 5VDC Initial contact resistance 100mΩ at 1A, 6VDC Frequency of operation, with/without load 1800/18000h-1 Operate/release time max. standard version: 15/8ms sensitive version: 20/8ms Electrical endurance NO 16A, 240VAC, resistive, 100x103 ops. NC 8A, 240VAC, resistive, 100x103 ops. Contact ratings 16A, 240VAC/30VDC Mechanical endurance 10x106 operations Coil Data Coil voltage range 5 to 48VDC Coil insulation system according UL class105 (A) class155 (F) Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW Standard coil, 720mW 05 5 3.5 0.25 36 720 06 6 4.2 0.3 48.5 720 09 9 6.3 0.45 115 720 12 12 8.4 0.6 200 720 24 24 16.8 1.2 820 720 48 48 33.6 2.4 3300 720 Sensitive coil, 540mW 05 5 3.8 0.25 48.5 540 06 6 4.5 0.3 68 540 09 9 6.8 0.45 155 540 12 12 9.0 0.6 270 540 24 24 18.0 1.2 1100 540 48 48 36.0 2.4 4400 540 All figures are given for coil without pre-energization, at ambient temperature +23°C. Power PCB Relay OZ/OZT 463 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise speciﬁed. Speciﬁcations and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. OEG Catalog 1308242 Issued 3-03 (PDF Rev. 11-04) Reference Data Wiring Diagrams Outline Dimensions Operating Voltage ycnatcepxE efiLemiT etarepO PC Board Layouts (Bottom View)

Ordering Information

Typical Part Number B OZ -SH -1 24 L M 1 F ,294 1. Basic Series: OZ = 16A PC Board Terminals OZF = Quick Connect Terminals OZT = TV-8 Rating PC Board Terminals 2. Enclosure: S = Vent (Flux-tight)* plastic cover (only available with OZF) SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Contact Material: Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1) 8. Mounting and Termination: Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P). 9. Insulation System: Blank = Class A (105 ° C) Insulation F= Class F (155 ° C) Insulation 10. Sufﬁx: ,200 = Standard model for "SS" enclosure on OZ and OZT ,000 = Standard model for coil input "D" on OZF Other Sufﬁx = Custom mode l ,294 = Standard model for "SH" enclosure on OZ and OZT ,300 = Standard model for coil input "L" on OZF * Not suitable for immersion cleaning processes. Coil Power (W) Time (msec) Release Time Operate Time -40 -20 Ambient T emp. (°C) 20% of Supplying Voltage to Coil 0 20 40 60 80 100 100 120 140 160 180 120 140 Operating Votage Range Pick-Up Voltage Cool Coil Hot Coil Applied Maximum Allowable Coil Voltage 13A 8A 13A/16A 16A 100 Contact Current (A) Operation (x 104) 0 2 4 6 8 1 0 12 14 16 18 20 240VAC Resistive OZ OZF OZ Note: This data is based on the max. allowable temperature for E type insulation coil (115 °C). OZF OZFOZ 8 – .059 DIA (1.5) .295 ± .012 (7.5 ± .3) .197 ± .012 (5.0 ± .3) .197 ± .012 (5.0 ± .3) .600 ± .012 (15.24 ± .3) .300 ± .004 (7.6 ± .1) 1.02 ± .008 (26.0 ± .2) .394 ± .006 (10.0 ± .15) 2 – .059 DIA (1.5) 2 – .047 DIA (1.2) .945 ± .08 (24.0 ± .2) .300 ± .004 (7.6 ± .1) .098 ± .004 (2.5 ± .1) .266 ± .012 (6.75 ± .3) 1.14 ± .02 (29.0 ± .5) .165 ± .012 (4.2 ± .3) 1.02 ± .02 (26.0 ± .5).073 (1.85) .394 ± .006 (10.0 ± .15) .394 (10.0) .047 (1.2) .047 (1.2) .047 (1.2) .024 ± .004 (0.6 ± .1) .134 (3.4) .2 ± .002 (.5 ± .05) .092 ± .012 (2.35 ± .3) .126 (3.2) .25 (6.35) .187 (4.75) .224 (5.7) .061 DIA (1.55) (Bottom View) (Bottom View) (Top View) * No electrical connection, for board attachment only. .024 c (.60) .085 ± .012 (2.15 ± .3) .012 (.3) .157 ± .012 (4.0 ± .3) .047 (1.2) .047 (1.2) 1.15 ± .02 (29.2 ± .5) .295 ± .012 (7.5 ± .3) .811 ± .02 (20.6 ± .5) .504 ± .02 (12.8 ± .5) .012 (.3) .012 (.3) .197 ± .012 (5.0 ± .3) .59 ± .012 (15.0 ± .3) .073 ± .012 (1.85 ± .3) OZ-SH-105D,294 OZ-SH-112D,294 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. OZ-SH-124D,294 OZ-SH-105LM1,294 OZ-SH-112LM1,294 OZ-SH-124LM1,294 OZ-SH-105L,294 OZ-SH-112L,294 OZ-SH-124L,294 Coil operative rangeOperate time 463 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise speciﬁed. Speciﬁcations and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. OEG Catalog 1308242 Issued 3-03 (PDF Rev. 11-04) Reference Data Wiring Diagrams Outline Dimensions Operating Voltage ycnatcepxE efiLemiT etarepO PC Board Layouts (Bottom View) Typical Part Number B OZ -SH -1 24 L M 1 F ,294 1. Basic Series: OZ = 16A PC Board Terminals OZF = Quick Connect Terminals OZT = TV-8 Rating PC Board Terminals 2. Enclosure: S = Vent (Flux-tight)* plastic cover (only available with OZF) SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Contact Material: Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1) 8. Mounting and Termination: Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P). 9. Insulation System: Blank = Class A (105 ° C) Insulation F= Class F (155 ° C) Insulation 10. Sufﬁx: ,200 = Standard model for "SS" enclosure on OZ and OZT ,000 = Standard model for coil input "D" on OZF Other Sufﬁx = Custom mode l ,294 = Standard model for "SH" enclosure on OZ and OZT ,300 = Standard model for coil input "L" on OZF * Not suitable for immersion cleaning processes. Coil Power (W) Time (msec) Release Time Operate Time -40 -20 Ambient T emp. (°C) 20% of Supplying Voltage to Coil 0 20 40 60 80 100 100 120 140 160 180 120 140 Operating Votage Range Pick-Up Voltage Cool Coil Hot Coil Applied Maximum Allowable Coil Voltage 13A 8A 13A/16A 16A 100 Contact Current (A) Operation (x 104) 0 2 4 6 8 1 0 12 14 16 18 20 240VAC Resistive OZ OZF OZ Note: This data is based on the max. allowable temperature for E type insulation coil (115 °C). OZF OZFOZ 8 – .059 DIA (1.5) .295 ± .012 (7.5 ± .3) .197 ± .012 (5.0 ± .3) .197 ± .012 (5.0 ± .3) .600 ± .012 (15.24 ± .3) .300 ± .004 (7.6 ± .1) 1.02 ± .008 (26.0 ± .2) .394 ± .006 (10.0 ± .15) 2 – .059 DIA (1.5) 2 – .047 DIA (1.2) .945 ± .08 (24.0 ± .2) .300 ± .004 (7.6 ± .1) .098 ± .004 (2.5 ± .1) .266 ± .012 (6.75 ± .3) 1.14 ± .02 (29.0 ± .5) .165 ± .012 (4.2 ± .3) 1.02 ± .02 (26.0 ± .5).073 (1.85) .394 ± .006 (10.0 ± .15) .394 (10.0) .047 (1.2) .047 (1.2) .047 (1.2) .024 ± .004 (0.6 ± .1) .134 (3.4) .2 ± .002 (.5 ± .05) .092 ± .012 (2.35 ± .3) .126 (3.2) .25 (6.35) .187 (4.75) .224 (5.7) .061 DIA (1.55) (Bottom View) (Bottom View) (Top View) * No electrical connection, for board attachment only. .024 c (.60) .085 ± .012 (2.15 ± .3) .012 (.3) .157 ± .012 (4.0 ± .3) .047 (1.2) .047 (1.2) 1.15 ± .02 (29.2 ± .5) .295 ± .012 (7.5 ± .3) .811 ± .02 (20.6 ± .5) .504 ± .02 (12.8 ± .5) .012 (.3) .012 (.3) .197 ± .012 (5.0 ± .3) .59 ± .012 (15.0 ± .3) .073 ± .012 (1.85 ± .3) OZ-SH-105D,294 OZ-SH-112D,294 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. OZ-SH-124D,294 OZ-SH-105LM1,294 OZ-SH-112LM1,294 OZ-SH-124LM1,294 OZ-SH-105L,294 OZ-SH-112L,294 OZ-SH-124L,294 463 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise speciﬁed. Speciﬁcations and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. OEG Catalog 1308242 Issued 3-03 (PDF Rev. 11-04) Reference Data Wiring Diagrams Outline Dimensions Operating Voltage ycnatcepxE efiLemiT etarepO PC Board Layouts (Bottom View) Typical Part Number B OZ -SH -1 24 L M 1 F ,294 1. Basic Series: OZ = 16A PC Board Terminals OZF = Quick Connect Terminals OZT = TV-8 Rating PC Board Terminals 2. Enclosure: S = Vent (Flux-tight)* plastic cover (only available with OZF) SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Contact Material: Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1) 8. Mounting and Termination: Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P). 9. Insulation System: Blank = Class A (105 ° C) Insulation F= Class F (155 ° C) Insulation 10. Sufﬁx: ,200 = Standard model for "SS" enclosure on OZ and OZT ,000 = Standard model for coil input "D" on OZF Other Sufﬁx = Custom mode l ,294 = Standard model for "SH" enclosure on OZ and OZT ,300 = Standard model for coil input "L" on OZF * Not suitable for immersion cleaning processes. Coil Power (W) Time (msec) Release Time Operate Time -40 -20 Ambient T emp. (°C) 20% of Supplying Voltage to Coil 0 20 40 60 80 100 100 120 140 160 180 120 140 Operating Votage Range Pick-Up Voltage Cool Coil Hot Coil Applied Maximum Allowable Coil Voltage 13A 8A 13A/16A 16A 100 Contact Current (A) Operation (x 104) 0 2 4 6 8 1 0 12 14 16 18 20 240VAC Resistive OZ OZF OZ Note: This data is based on the max. allowable temperature for E type insulation coil (115 °C). OZF OZFOZ 8 – .059 DIA (1.5) .295 ± .012 (7.5 ± .3) .197 ± .012 (5.0 ± .3) .197 ± .012 (5.0 ± .3) .600 ± .012 (15.24 ± .3) .300 ± .004 (7.6 ± .1) 1.02 ± .008 (26.0 ± .2) .394 ± .006 (10.0 ± .15) 2 – .059 DIA (1.5) 2 – .047 DIA (1.2) .945 ± .08 (24.0 ± .2) .300 ± .004 (7.6 ± .1) .098 ± .004 (2.5 ± .1) .266 ± .012 (6.75 ± .3) 1.14 ± .02 (29.0 ± .5) .165 ± .012 (4.2 ± .3) 1.02 ± .02 (26.0 ± .5).073 (1.85) .394 ± .006 (10.0 ± .15) .394 (10.0) .047 (1.2) .047 (1.2) .047 (1.2) .024 ± .004 (0.6 ± .1) .134 (3.4) .2 ± .002 (.5 ± .05) .092 ± .012 (2.35 ± .3) .126 (3.2) .25 (6.35) .187 (4.75) .224 (5.7) .061 DIA (1.55) (Bottom View) (Bottom View) (Top View) * No electrical connection, for board attachment only. .024 c (.60) .085 ± .012 (2.15 ± .3) .012 (.3) .157 ± .012 (4.0 ± .3) .047 (1.2) .047 (1.2) 1.15 ± .02 (29.2 ± .5) .295 ± .012 (7.5 ± .3) .811 ± .02 (20.6 ± .5) .504 ± .02 (12.8 ± .5) .012 (.3) .012 (.3) .197 ± .012 (5.0 ± .3) .59 ± .012 (15.0 ± .3) .073 ± .012 (1.85 ± .3) OZ-SH-105D,294 OZ-SH-112D,294 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. OZ-SH-124D,294 OZ-SH-105LM1,294 OZ-SH-112LM1,294 OZ-SH-124LM1,294 OZ-SH-105L,294 OZ-SH-112L,294 OZ-SH-124L,294 Electrical endurance CtU

04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. OEG General Purpose Relays PCB Relays Power PCB Relay OZ/OZT (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature standard coil: -30 to 60°C sensitive coil: -30 to 70°C Category of environmental protection IEC 61810 RTII - flux proof, RTIII - wash tight Vibration resistance (functional) 10 to 50Hz, 1.5mm double amplitude Shock resistance (functional) IEC 60068-2-27 (half sine) 98m/s2, 11ms Terminal type PCB-THT Weight 13g Resistance to soldering heat THT IEC 60068-2-20 260°C/5s Packaging/unit box/1000 pcs. Insulation Data Initial dielectric strength between open contacts 1000Vrms between contact and coil 5000Vrms Initial surge withstand voltage between contact and coil 10000V Initial insulation resistance 1000MΩ Clearance/creepage between contact and coil 5.5/8mm PCB layout Bottom view on solder pins 463 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise speciﬁed. Speciﬁcations and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. OEG Catalog 1308242 Issued 3-03 (PDF Rev. 11-04) Reference Data Wiring Diagrams Outline Dimensions Operating Voltage ycnatcepxE efiLemiT etarepO PC Board Layouts (Bottom View) Typical Part Number B OZ -SH -1 24 L M 1 F ,294 1. Basic Series: OZ = 16A PC Board Terminals OZF = Quick Connect Terminals OZT = TV-8 Rating PC Board Terminals 2. Enclosure: S = Vent (Flux-tight)* plastic cover (only available with OZF) SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Contact Material: Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1) 8. Mounting and Termination: Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P). 9. Insulation System: Blank = Class A (105 ° C) Insulation F= Class F (155 ° C) Insulation 10. Sufﬁx: ,200 = Standard model for "SS" enclosure on OZ and OZT ,000 = Standard model for coil input "D" on OZF Other Sufﬁx = Custom mode l ,294 = Standard model for "SH" enclosure on OZ and OZT ,300 = Standard model for coil input "L" on OZF * Not suitable for immersion cleaning processes. Coil Power (W) Time (msec) Release Time Operate Time -40 -20 Ambient T emp. (°C) 20% of Supplying Voltage to Coil 0 20 40 60 80 100 100 120 140 160 180 120 140 Operating Votage Range Pick-Up Voltage Cool Coil Hot Coil Applied Maximum Allowable Coil Voltage 13A 8A 13A/16A 16A 100 Contact Current (A) Operation (x 104) 0 2 4 6 8 1 0 12 14 16 18 20 240VAC Resistive OZ OZF OZ Note: This data is based on the max. allowable temperature for E type insulation coil (115 °C). OZF OZFOZ 8 – .059 DIA (1.5) .295 ± .012 (7.5 ± .3) .197 ± .012 (5.0 ± .3) .197 ± .012 (5.0 ± .3) .600 ± .012 (15.24 ± .3) .300 ± .004 (7.6 ± .1) 1.02 ± .008 (26.0 ± .2) .394 ± .006 (10.0 ± .15) 2 – .059 DIA (1.5) 2 – .047 DIA (1.2) .945 ± .08 (24.0 ± .2) .300 ± .004 (7.6 ± .1) .098 ± .004 (2.5 ± .1) .266 ± .012 (6.75 ± .3) 1.14 ± .02 (29.0 ± .5) .165 ± .012 (4.2 ± .3) 1.02 ± .02 (26.0 ± .5).073 (1.85) .394 ± .006 (10.0 ± .15) .394 (10.0) .047 (1.2) .047 (1.2) .047 (1.2) .024 ± .004 (0.6 ± .1) .134 (3.4) .2 ± .002 (.5 ± .05) .092 ± .012 (2.35 ± .3) .126 (3.2) .25 (6.35) .187 (4.75) .224 (5.7) .061 DIA (1.55) (Bottom View) (Bottom View) (Top View) * No electrical connection, for board attachment only. .024 c (.60) .085 ± .012 (2.15 ± .3) .012 (.3) .157 ± .012 (4.0 ± .3) .047 (1.2) .047 (1.2) 1.15 ± .02 (29.2 ± .5) .295 ± .012 (7.5 ± .3) .811 ± .02 (20.6 ± .5) .504 ± .02 (12.8 ± .5) .012 (.3) .012 (.3) .197 ± .012 (5.0 ± .3) .59 ± .012 (15.0 ± .3) .073 ± .012 (1.85 ± .3) OZ-SH-105D,294 OZ-SH-112D,294 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. OZ-SH-124D,294 OZ-SH-105LM1,294 OZ-SH-112LM1,294 OZ-SH-124LM1,294 OZ-SH-105L,294 OZ-SH-112L,294 OZ-SH-124L,294 463 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise speciﬁed. Speciﬁcations and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. OEG Catalog 1308242 Issued 3-03 (PDF Rev. 11-04) Reference Data Wiring Diagrams Outline Dimensions Operating Voltage ycnatcepxE efiLemiT etarepO PC Board Layouts (Bottom View) Typical Part Number B OZ -SH -1 24 L M 1 F ,294 1. Basic Series: OZ = 16A PC Board Terminals OZF = Quick Connect Terminals OZT = TV-8 Rating PC Board Terminals 2. Enclosure: S = Vent (Flux-tight)* plastic cover (only available with OZF) SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Contact Material: Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1) 8. Mounting and Termination: Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P). 9. Insulation System: Blank = Class A (105 ° C) Insulation F= Class F (155 ° C) Insulation 10. Sufﬁx: ,200 = Standard model for "SS" enclosure on OZ and OZT ,000 = Standard model for coil input "D" on OZF Other Sufﬁx = Custom mode l ,294 = Standard model for "SH" enclosure on OZ and OZT ,300 = Standard model for coil input "L" on OZF * Not suitable for immersion cleaning processes. Coil Power (W) Time (msec) Release Time Operate Time -40 -20 Ambient T emp. (°C) 20% of Supplying Voltage to Coil 0 20 40 60 80 100 100 120 140 160 180 120 140 Operating Votage Range Pick-Up Voltage Cool Coil Hot Coil Applied Maximum Allowable Coil Voltage 13A 8A 13A/16A 16A 100 Contact Current (A) Operation (x 104) 0 2 4 6 8 1 0 12 14 16 18 20 240VAC Resistive OZ OZF OZ Note: This data is based on the max. allowable temperature for E type insulation coil (115 °C). OZF OZFOZ 8 – .059 DIA (1.5) .295 ± .012 (7.5 ± .3) .197 ± .012 (5.0 ± .3) .197 ± .012 (5.0 ± .3) .600 ± .012 (15.24 ± .3) .300 ± .004 (7.6 ± .1) 1.02 ± .008 (26.0 ± .2) .394 ± .006 (10.0 ± .15) 2 – .059 DIA (1.5) 2 – .047 DIA (1.2) .945 ± .08 (24.0 ± .2) .300 ± .004 (7.6 ± .1) .098 ± .004 (2.5 ± .1) .266 ± .012 (6.75 ± .3) 1.14 ± .02 (29.0 ± .5) .165 ± .012 (4.2 ± .3) 1.02 ± .02 (26.0 ± .5).073 (1.85) .394 ± .006 (10.0 ± .15) .394 (10.0) .047 (1.2) .047 (1.2) .047 (1.2) .024 ± .004 (0.6 ± .1) .134 (3.4) .2 ± .002 (.5 ± .05) .092 ± .012 (2.35 ± .3) .126 (3.2) .25 (6.35) .187 (4.75) .224 (5.7) .061 DIA (1.55) (Bottom View) (Bottom View) (Top View) * No electrical connection, for board attachment only. .024 c (.60) .085 ± .012 (2.15 ± .3) .012 (.3) .157 ± .012 (4.0 ± .3) .047 (1.2) .047 (1.2) 1.15 ± .02 (29.2 ± .5) .295 ± .012 (7.5 ± .3) .811 ± .02 (20.6 ± .5) .504 ± .02 (12.8 ± .5) .012 (.3) .012 (.3) .197 ± .012 (5.0 ± .3) .59 ± .012 (15.0 ± .3) .073 ± .012 (1.85 ± .3) OZ-SH-105D,294 OZ-SH-112D,294 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. OZ-SH-124D,294 OZ-SH-105LM1,294 OZ-SH-112LM1,294 OZ-SH-124LM1,294 OZ-SH-105L,294 OZ-SH-112L,294 OZ-SH-124L,294 463 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise speciﬁed. Speciﬁcations and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. OEG Catalog 1308242 Issued 3-03 (PDF Rev. 11-04) Reference Data Wiring Diagrams Outline Dimensions Operating Voltage ycnatcepxE efiLemiT etarepO PC Board Layouts (Bottom View) Typical Part Number B OZ -SH -1 24 L M 1 F ,294 1. Basic Series: OZ = 16A PC Board Terminals OZF = Quick Connect Terminals OZT = TV-8 Rating PC Board Terminals 2. Enclosure: S = Vent (Flux-tight)* plastic cover (only available with OZF) SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Contact Material: Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1) 8. Mounting and Termination: Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P). 9. Insulation System: Blank = Class A (105 ° C) Insulation F= Class F (155 ° C) Insulation 10. Sufﬁx: ,200 = Standard model for "SS" enclosure on OZ and OZT ,000 = Standard model for coil input "D" on OZF Other Sufﬁx = Custom mode l ,294 = Standard model for "SH" enclosure on OZ and OZT ,300 = Standard model for coil input "L" on OZF * Not suitable for immersion cleaning processes. Coil Power (W) Time (msec) Release Time Operate Time -40 -20 Ambient T emp. (°C) 20% of Supplying Voltage to Coil 0 20 40 60 80 100 100 120 140 160 180 120 140 Operating Votage Range Pick-Up Voltage Cool Coil Hot Coil Applied Maximum Allowable Coil Voltage 13A 8A 13A/16A 16A 100 Contact Current (A) Operation (x 104) 0 2 4 6 8 1 0 12 14 16 18 20 240VAC Resistive OZ OZF OZ Note: This data is based on the max. allowable temperature for E type insulation coil (115 °C). OZF OZFOZ 8 – .059 DIA (1.5) .295 ± .012 (7.5 ± .3) .197 ± .012 (5.0 ± .3) .197 ± .012 (5.0 ± .3) .600 ± .012 (15.24 ± .3) .300 ± .004 (7.6 ± .1) 1.02 ± .008 (26.0 ± .2) .394 ± .006 (10.0 ± .15) 2 – .059 DIA (1.5) 2 – .047 DIA (1.2) .945 ± .08 (24.0 ± .2) .300 ± .004 (7.6 ± .1) .098 ± .004 (2.5 ± .1) .266 ± .012 (6.75 ± .3) 1.14 ± .02 (29.0 ± .5) .165 ± .012 (4.2 ± .3) 1.02 ± .02 (26.0 ± .5).073 (1.85) .394 ± .006 (10.0 ± .15) .394 (10.0) .047 (1.2) .047 (1.2) .047 (1.2) .024 ± .004 (0.6 ± .1) .134 (3.4) .2 ± .002 (.5 ± .05) .092 ± .012 (2.35 ± .3) .126 (3.2) .25 (6.35) .187 (4.75) .224 (5.7) .061 DIA (1.55) (Bottom View) (Bottom View) (Top View) * No electrical connection, for board attachment only. .024 c (.60) .085 ± .012 (2.15 ± .3) .012 (.3) .157 ± .012 (4.0 ± .3) .047 (1.2) .047 (1.2) 1.15 ± .02 (29.2 ± .5) .295 ± .012 (7.5 ± .3) .811 ± .02 (20.6 ± .5) .504 ± .02 (12.8 ± .5) .012 (.3) .012 (.3) .197 ± .012 (5.0 ± .3) .59 ± .012 (15.0 ± .3) .073 ± .012 (1.85 ± .3) OZ-SH-105D,294 OZ-SH-112D,294 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. OZ-SH-124D,294 OZ-SH-105LM1,294 OZ-SH-112LM1,294 OZ-SH-124LM1,294 OZ-SH-105L,294 OZ-SH-112L,294 OZ-SH-124L,294 Dimensions Terminal assignment Bottom view on solder pins

04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. OEG General Purpose Relays PCB Relays Power PCB Relay OZ/OZT (Continued) Product code structure Typical product code OZ -SS 1 12 D M 1 F ,200 Type OZ / OZT Power PCB Relay OZ / OZT Sealing SS Flux proof SH Wash tight Pole 1 1pole Coil Coil code: please refer to coil versions table Coil power D Standard 720mW L Sensitive 540mW Contact arrangement Blank 1 form C (CO) M 1 form A (NO) Contact material Blank AgCdO 1 AgSnO Coil insulation Blank Class 105 (A) F Class 155 (F) Suffix ,200 Flux proof ,294 Wash tight Product code Version Contact Cont.material Coil power Coil voltage Sealing Part number OZ-SS-105DM1,200 16A 1 form A (NO) AgSnO 720mW 5VDC Flux proof 1461251-5 OZ-SS-112DM1,200 12VDC 2-1440002-2 OZ-SS-124DM1,200 24VDC 2-1440002-6 OZ-SS-105LM1,200 540mW 5VDC 1461251-3 OZ-SS-112LM1,200 12VDC 2-1440002-4 OZ-SS-124LM1,200 24VDC 2-1440002-9 OZ-SH-105DM1,294 720mW 5VDC Wash tight 1461250-4 OZ-SH-112DM1,294 12VDC 1-1461250-4 OZ-SH-124DM1,294 24VDC 1-1440002-0 OZ-SH-105LM1,294 540mW 5VDC 1440002-5 OZ-SH-112LM1,294 12VDC 1440002-8 OZ-SH-124LM1,294 24VDC 1-1461250-5 OZ-SS-105D1,200 1 form C (CO) 720mW 5VDC Flux proof 1-1649399-7 OZ-SS-112D1,200 12VDC 2-1649399-0 OZ-SS-124D1,200 24VDC 2-1649399-2 OZ-SS-105L1,200 540mW 5VDC 1649399-1 OZ-SS-112L1,200 12VDC 1649399-4 OZ-SS-124L1,200 24VDC 1649399-6 OZ-SS-112LF,000 12VDC 1461869-3 OZ-SH-112LF,000 12VDC Wash tight 1461869-4

Product Information

1649399-1 specifications and overview.

Summary

Power PCB Relay OZ/OZT 04-2011, Rev. 0411

Description

Power PCB Relay OZ/OZT 04-2011, Rev. 0411

Source title 1649399-1 Datasheet(PDF) - TE Connectivity Ltd

Related Parts

More parts from the same family.

Browse manufacturer