16466351 TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
■Threaded barrel, M18 x 1 ■Brass, PTFE ■Front cap with special coating, very resistant to thermal and mechanical load ■Factor 1 for all metals ■Protection class IP68 ■Resistant to magnetic fields ■Large switching distance ■Integrated protection against predamping ■Little metal-free spaces ■DC 3-wire, 10…30 VDC ■NO contact, PNP output ■M12 x 1 male connector Wiring diagram Functional principle Inductive sensors are designed for wear-free and contactless detection of metal objects. uprox+ sensors have significant advantages due to their patented multi-coil system. They excel thanks to their optimum switching distances, maximum flexibility and operational reliability as well as efficient standardization.
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|3 NI30U-MT30-AP6X2-H1141/S1589 | 11/07/2023 14-05 | technical changes reserved Technical data Switching frequency 1 kHz Mechanical data Design Threaded barrel, M30 x 1.5 Dimensions 62 mm Housing material Metal, CuZn, PTFE-coated Active area material Plastic, LCP + WeldGuard™, PTFE-coated Max. tightening torque of housing nut 75 Nm Electrical connection Connector, M12 × 1 Environmental conditions Ambient temperature -30…+85 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP68 MTTF 874 years acc. to SN 29500 (Ed. 99) 40 Power-on indication LED, Green Switching state LED, Yellow Mounting instructions Mounting instructions/Description Distance D 3 x B Distance W 3 x Sn Distance T 3 x B Distance S 1.5 x B Distance G 6 x Sn Distance N 2 x Sn Diameter active area B Ø 30 mm All non-flush mountable uprox®+ threaded barrel sensors can be screwed to the upper edge of the barrel. In this mounting position, the sensor operates safely with a 20 % reduced switching distance. When installed in an aperture plate, a distance of X = 140 mm must be observed.
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|3 NI30U-MT30-AP6X2-H1141/S1589 | 11/07/2023 14-05 | technical changes reserved Accessories BST-30B 6947216 Mounting clamp for threaded barrel sensors, with dead-stop; material: PA6 QMT-30 6945105 Quick-mount bracket with dead-stop; material: brass, PTFE-coated; Male thread M36 × 1.5. Note: The switching distance of the proximity switches may change when using quick-mount brackets. BSS-30 6901319 Mounting clamp for smooth and threaded barrel sensors; material: Polypropylene