1635330 TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
■Threaded barrel, M18 x 1 ■Chrome-plated brass ■Factor 1 for all metals ■Protection class IP68 ■Resistant to magnetic fields ■Large switching distance ■Integrated protection against predamping ■Little metal-free spaces ■DC 3-wire, 10…30 VDC ■NO contact, PNP output ■Cable connection Wiring diagram Functional principle Inductive sensors are designed for wear-free and contactless detection of metal objects. uprox+ sensors have significant advantages due to their patented multi-coil system. They excel thanks to their optimum switching distances, maximum flexibility and operational reliability as well as efficient standardization.
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|3 NI15U-M18-AP6X | 11/07/2023 13-14 | technical changes reserved Technical data Switching frequency 1 kHz Mechanical data Design Threaded barrel, M18 x 1 Dimensions 54 mm Housing material Metal, CuZn, Chrome-plated Active area material Plastic, LCP End cap Plastic, EPTR Max. tightening torque of housing nut 25 Nm Electrical connection Cable Cable quality Ø 5.2 mm, LifYY, PVC, 2 m Core cross-section 3 x 0.34 mm Environmental conditions Ambient temperature -30…+85 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP68 MTTF 874 years acc. to SN 29500 (Ed. 99) 40 Switching state LED, Yellow
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|3 NI15U-M18-AP6X | 11/07/2023 13-14 | technical changes reserved Mounting instructions Mounting instructions/Description Distance D 70 mm Distance W 3 x Sn Distance T 3 x B Distance S 1.5 x B Distance G 6 x Sn Distance N 2 x Sn Diameter active area B Ø 18 mm All non-flush mountable uprox®+ threaded barrel sensors can be screwed to the upper edge of the barrel. In this mounting position, the sensor operates safely with a 20 % reduced switching distance. When installed in an aperture plate, a distance of X = 70 mm must be observed. Accessories BST-18B 6947214 Mounting clamp for threaded barrel sensors, with dead-stop; material: PA6 QM-18 6945102 Quick-mount bracket with dead-stop; material: Chrome-plated brass. Male thread M24 × 1.5. Note: The switching distance of the proximity switches may change when using quick-mount brackets. MW-18 6945004 Mounting bracket for threaded barrel sensors; material: Stainless steel A2 1.4301 (AISI 304) BSS-18 6901320 Mounting clamp for smooth and threaded barrel sensors; material: Polypropylene