411-1040 TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be tra demarks of their respective owners. PRODUCT INFORMATION 1-800-522-6752 This controlled document is subject to change. visit our website at www.te.com.
27 JAN 16 Rev B
Figure 1. Use this table to select the proper tool for the wire size to be used. Reasons for reissue are provided in Section 5, REVISION SUMMARY. Strip the wire 5.2 mm [.200 in.] for both the pin and socket terminals.
- INSULATION CRIMPING ADJUSTMENT
- The insulation crimping jaws have three adjustments.
- Place the insulation crimping adjustment pin in the No. 3 position. See Figure 1.
- Place the terminal in the tool according to Paragraph 4, and insert the unstripped wire into only the
volume applications. A wide selection of powered application equipment for extended-use, production operations is available.