UG1D MULTICOMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Page <1> 19/07/08 V1.1 Features:

  • Plastic package.
  • Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes.
  • Ultrafast recovery time for high efficiency.
  • Excellent high temperature switching.
  • Soft recovery characteristics.
  • Glass passivated junction.
  • High temperature soldering guaranteed: 250°C/10 seconds, 0.375 inch (9.5mm) lead length, 5lbs. (2.3kg) tension. DO-204AL (DO-41) Dimensions : Inches (Millimetres) Mechanical Data: Case : JEDEC DO-204AL moulded plastic body over passivated chip. Terminals : Axial leads, solderable per MIL-STD-750, Method 2026. Polarity : Colour band denotes cathode end. Mounting position : Any. Weight : 0.012 oz., 0.34 grams. Ultrafast Plastic Rectifier

Page <1> 19/07/08 V1.1 Maximum Ratings and Thermal Characteristics Rating at 25°C ambient temperature unless otherwise specified. Parameter Symbols UG1D Units Maximum Repetitive Peak Reverse Voltage VRRM 200 VMaximum RMS Voltage VRMS 140 Maximum DC Blocking Voltage VDC 200 Maximum Average Forward Rectified Current at 0.375 inch (9.5mm) Lead Length at TL = 75ºC IF (AV) 1.0 A Peak Forward Surge Current 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC Method) at T L = 75ºC IFSM 40 Typical Thermal Resistance (1) RθJA RθJL 20 °C/W Operating Junction and Storage Temperature Range TJ , TSTG -55 to +150°C °C

Electrical Characteristics

Rating at 25°C ambient temperature unless otherwise specified. Parameter Symbols Value Units Maximum Instantaneous Forward Voltage at 1.0A (NOTE 2) VF 0.95 V Maximum DC Reverse Current T A = 25°C at Rated DC Blocking Voltage T A = 100°C IR 5.0 200 µA Maximum Reverse Recovery Time at IF = 0.5A, IR = 1.0A, Irr = 0.25A trr nsMaximum Reverse Recovery Time at T J = 25°C IF = 1.0A, VR = 30V, di/dt = 50A/µs, Irr = 10% IRM TJ = 100°C Maximum Recovered Stored Charge T J = 25°C IF = 1.0A, VR = 30V, di/dt = 50A/µs, Irr = 10% IRM TJ = 100°C Qrr 8.0 12 nC Typical Junction Capacitance at 4V, 1MHz CJ 7.0 pF Notes: (1) trr and Q rr measured at tester: IF = 4.0A, VR = 30V, di/dt = 50A/µs, Irr = 10% IRM for measurement of trr. (2) Thermal resistance from junction to ambient at 0.375 inch (9.5mm) lead length.

Page <2> 19/07/08 V1.1 Ratings and Characteristic Curves (TA = 25°C unless otherwise noted) Forward Current Derating Curves Average Forward Rectified Current (A) Temperature (°C) Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current (A) Instantaneous Forward Current (A) Number of Cycles at 60 Hz Typical Instantaneous Forward Characteristics Instantaneous Reverse Current (µA) Typical Reverse Characteristics Percent of Rated Peak Reverse Voltage (%)Instantaneous Forward Voltage (V)

Page <3> 19/07/08 V1.1 Part Number Table Description Part Number Diode, Ultra-fast, 1A, 200V UG1D Recovered Charge / Reverse Recovery Time, nC/ns Reverse Switching Characteristics Junction Capacitance, pF Typical Junction Capacitance Reverse Voltage (V)Junction Temperature (°C)

For enquiries from all other markets 1625274 Page <5> 19/07/08 V1.1 Notes: International Sales Offices: AUSTRALIA– Farnell Tel No: ++61 1300 361 005 Fax No: ++61 1300 361 225 FRANCE – Farnell Tel No: ++ 33 474 68 99 99 Fax No: ++ 33 474 68 99 90 NORWAY– Farnell Tel No: 800 146 70 Fax No: 800 146 76 AUSTRIA – Farnell Tel No: ++ 43 662 2180 680 Fax No: ++ 43 662 2180 670 GERMANY – Farnell Tel No: ++ 49 89 61 39 39 39 Fax No: ++ 49 89 613 59 01 PORTUGAL– Farnell Tel No: ++ 34 93 475 8804 Fax No: ++ 34 93 474 5288 RUSSIA – Farnell Tel No: ++ 44 870 1200 208 Fax No: ++ 44 870 1200 209 ESTONIA – Farnell Tel No: ++ 358 9 560 7780 Fax No: ++ 358 9 345 5411 NETHERLANDS– Farnell Tel No: ++ 31 30 241 7373 Fax No: ++ 31 30 241 7333 UK – Farnell Tel No: ++ 44 8701 200 200 Fax No: ++ 44 8701 200 201 SINGAPORE– Farnell-Newark Tel No: ++ 65 6788 0200 Fax No: ++ 65 6788 0300 HONG KONG– Farnell-Newark Tel No: ++ 852 2268 9888 Fax No: ++ 852 2268 9899 HUNGARY- Farnell Tel No: ++ 44 870 1200 208 Fax No: ++ 44 870 1200 209 BELGIUM – Farnell Tel No: ++ 32 3 475 2810 Fax No: ++ 32 3 227 3648 BRAZIL – Farnell-Newark Tel No: ++ 55 11 4066 9400 Fax No: ++ 55 11 4066 9410 IRELAND – Farnell Tel No: ++ 353 1 830 9277 Fax No: ++ 353 1 830 9016 INDIA - Farnell Tel No: ++ 44 870 1200 208 Fax No: ++ 44 870 1200 209 ISRAEL – Farnell Tel No: ++ 180 937 0015 Fax No: ++ 180 937 0014 SPAIN– Farnell Tel No: 901 20 20 80 Fax No: 901 20 20 90 CHINA – Farnell-Newark Tel No: ++86 10 6238 5152 Fax No: ++86 10 6238 5022 CZECH REPUBLIC- Farnell Tel No: ++ 44 870 1200 208 Fax No: ++ 44 870 1200 209 ITALY– Farnell Tel No: ++ 39 02 93 995 200 Fax No: ++ 39 02 93 995 300 SWEDEN – Farnell Tel No: ++ 46 8 730 50 00 Fax No: ++ 46 8 83 52 62 MALAYSIA– Farnell-Newark Tel No: ++ 60 3 7873 8000 Fax No: ++ 60 3 7873 7000 SWITZERLAND– Farnell Tel No: ++ 44 204 64 64 Fax No: ++ 44 204 64 54 DENMARK – Farnell Tel No: ++ 45 44 53 66 44 Fax No: ++ 45 44 53 66 06 UK – CPC ++ 44 8701 202 530 ++ 44 8701 202 531 USA – Newark Tel No: 800 463 9275 NEW ZEALAND– Farnell Tel No: 0800 90 80 80 Fax No: 0800 90 80 81 EXPORT – Farnell Tel No: ++ 44 8701 200 208 Fax No: ++ 44 8701 200 209 export FINLAND – Farnell Tel No: ++ 358 9 560 7780 Fax No: ++ 358 9 345 5411 Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group w as aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2008. http://www.farnell.com http://www.newark.com http://www.cpc.co.uk