1615-20 ANAREN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model 1615-20 Features:
- RoHS Compliant
- 100 Watts
- DC – 2.3 GHz
- AlN Ceramic
- Non-Nichrome Resistive Element
- Low VSWR
- 100% Tested Chip Attenuator
100 Watts, 20 dB
Description
The 1615-20 is high performance Aluminum Nitride (AlN) Chip attenuator intended as a cost competitive alternative to Beryllium Oxide (BeO). The attenuator is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The Attenuator is also RoHS compliant! General Specifications Resistive Element Thick film Substrate AlN Ceramic Terminal Finish Matte Tin over Nickel Barrier Operating Temperature -55 to +200°C (see de rating chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Attenuation Value: 20 dB ± 1.0 dB Power: 100 Watts Frequency Range: DC – 2.3 GHz VSWR 1.25 : 1 Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES. TOLERANCES ON DECIMALS .XXX ± .010 1615-20 pg.1 of 2
USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model 1615-20 Typical Performance: Typical Performance: RETURN LOSSRETURN LOSS ATTENUATION Power De-rating: *Actual performance could be limited by the solder properties of the application Mounting Procedure: 1615-20 pg.2 of 2