1614-SC-WW-02 EMCORE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

§ OC-48 pinout § Telcordia Technologies TM 468 compliant § Wide temperature range — stable even in harsh environment s 1614W 1310 nm DFB Laser Module The 1614W 1310 nm wideband wireless DFB laser modules are designed for analog applications requiring an operational bandwidth between 5 MHz and 2700 MHz. The highly linear, OC-48 pinout compatible devices feature up to 25 mW of output power with superior performance over an enhanced operating range of – 40 °C to 85 °C. Performance Highlights Min Typical Max Units Wavelength 1300 - 1320 nm Optical Output Power (two versions) <25 mW mW Temperature Range -40 - +85 °C Frequency Range 5 - 2700 MHz Input Third Order Intercept 32 - dBm 1 dB Compression Point 18 - - dBm See following pages for complete specifications and conditions.

DATA SHEET| OCTOBER 25, 2004 ORTEL, A division of EMCORE 1614W 1310 nm DFB Laser Module Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device relia bility. Parameter Symbol Condition Min Max Units Operating Case Temperature TC continuous -40 +85 °C Storage Temperature TSTG - -40 +85 °C Laser Forward dc Current - - - 150 mA Reverse Voltage Photodiode VRPD 60 seconds - 10 V Laser Reverse Voltage, d c - continuous - 1 V ESD - HBM: R = 1500 Ohm, C = 100 pF -500 500 V TEC Current ITEC continuous -1.9 1.9 A Electrical/Optical Characteristics Laser Temperature (T L) = 25°C, IF = IOP, Beginning of Life (BOL) Parameter Symbol Condition Min Typ Max Unit Wavelength ?OP 1300 - 1320 nm Optical Output Power PO 1614xxxx -02 version 1614xxxx -08 version mW mW Optical Isolation ISO - 30 - - dB Sidemode Suppression Ratio SMSR - 30 - - dB Threshold Current ITH - - - 30 mA Operating Current IOP - - - 120 mA Monitor PD Responsivity rPD VRM= 5V 10 - 200 µA/mW Thermistor Resistance RTH TOP = 25 °C 9.5 10 10.5 KOhm Thermistor Temp. Coefficient TCTH TOP = 25 °C - -4.4 - %/°C TEC Current ITEC -40<TC<+85°C; IF = 100mA -1.5 - 1.6 A Fiber Length - May include splice 1.0 1.5 - m Fiber Buffer - - - 900 - µm Fiber Core / Cladding - - - 9/125 - µm RF Characteristics Laser Temperature (T L) = 25°C, IF = IOP, Beginning of Life (BOL) Parameter Symbol Condition Min Typ Max Units Frequency Range F - 5 - 2700 MHz Frequency Response S21 Any 500 MHz 5-2700 MHz dB, p-p dB, p-p Input Third Order Intercept IIP3 - 32 - - dBm 1 dB Compression point - - 18 - - dBm Nominal Input Impedance ZIN - - 25 - Ohms Return Loss – Tested w/ resistive match 50 Ω to 25Ω pad In order to prevent reflection-induced distortion, the laser must be connected to an optical cable having a return loss of at least 55 dB for discrete reflections and 30 dB for distributed reflections.

DATA SHEET| OCTOBER 25, 2004 ORTEL, A division of EMCORE 1614W 1310 nm DFB Laser Module Outline Diagram Dimensions are in inc hes and (millimeters) Pin Information Pin No. Description

1 Thermistor

2 Thermistor

3 Dc Laser Bias ( -)

4 MPD Anode (-)

5 MPD Cathode (+)

6 Thermal Electric Cooler (+)

7 Thermal Electric Cooler ( -)

8 Case Ground

9 Case Ground

11 Laser Common (+)

12 Laser Modulation ( -)

13 Laser Common (+)

DATA SHEET| OCTOBER 25, 2004 ORTEL, A division of EMCORE 1614W 1310 nm DFB Laser Module Laser Safety This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class IIIb laser product. This device has been classified with the FDA/CDRH under accession number 0220191. Single-mode fiber pigtail with SC/APC connectors (standard). Wavelength = 1.3 µm. Maximum power = 50 mW. Because of size constraints, laser safety labeling (including an FDA class IIIb label) is not affixed to the module, but attached to the outside of the shipping carton. Product is not shipped with power supply. Caution: Use of controls, adjustments and procedures other than those specified herein may result in hazardous laser radiation exposure. DANGER INVISIBLE LASER RADIATION IS EMITTED FROM THE END OF FIBER OR CONNECTOR Avoid direct exposure to beam Do not view beam directly with optical instruments INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR Avoid exposure to beam Class 3B Laser ProductIEC-60825 1993Max. Output: 50 mWWavelength: 1.3 µm DANGER INVISIBLE LASER RADIATION Max. Output: 50 mW, Class IIIb Laser Product AVOID DIRECT EXPOSURE TO BEAM Wavelength: 1.3 µm

DATA SHEET| OCTOBER 25, 2004 ORTEL, A division of EMCORE 1614W 1310 nm DFB Laser Module

Ordering Information

Contact Ortel for ordering information at 626 -293-3400. Ordering Code Definitions

1614 SC WW 08

Analog 1310 nm, DFB, Laser Frequency Plan WW = Wireless Optical Power, min. 02 = 2 mW 08 = 8 mW Optical Connector SC = SC/APC FC = FC/APC PG = None Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of the product at any time without notice. Ortel, the Ortel logo, EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation. ds.1614W  Copyright 2003. EMCORE Corporation Ortel, a division of EMCORE

2015 West Chestnut Street

Alhambra, California 91803 -1542 Tel: 626-293-3400 Fax: 626-293-3428 www.emcore.com