160CMQ

160CMQ IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

SCHOTTKY RECTIFIER 160 Amp 160CMQ... SERIES www.irf.com 1 PD-2.254 rev. A 12/97 CASE STYLE AND DIMENSIONS Conforms to JEDEC Outline TO - 249AA Dimensions in millimeters and inches Major Ratings and Characteristics IF(AV) Rectangular 160 A waveform VRRM range 35 to 45 V IFSM @ tp = 5 µs sine 6400 A VF @ 80 Apk, TJ = 125°C 0.60 V (per leg) TJ range - 55 to 150 °C Characteristics 160CMQ... Units The 160CMQ isolated, center tap Schottky rectifier module series has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, convert- ers, free-wheeling diodes, and reverse battery protection. 150° C T J operation Isolated heatsink Center tap module High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Low profile, high current package Description/Features

160CMQ... Series PD-2.254 rev. A 12/97 www.irf.com TJ Max. Junction Temperature Range -55 to 150 °C Tstg Max. Storage Temperature Range -55 to 150 °C RthJC Max. Thermal Resistance Junction 1.0 °C/W DC operation * See Fig. 4 to Case (Per Leg) RthJC Max. Thermal Resistance Junction 0.50 °C/W DC operation to Case (Per Package) RthCS Typical Thermal Resistance, Case 0.10 °C/W Mounting surface , smooth and greased to Heatsink wt Approximate Weight 58 (2.0) g (oz.) T Mounting Torque Min. 40 (35) Max. 58 (50) Case Style TO - 249AA JEDEC Thermal-Mechanical Specifications Kg-cm (Ibf-in) VFM Max. Forward Voltage Drop 0.64 V @ 80A (Per Leg) * See Fig. 1 (1) 0.86 V @ 160A

0.60 V @ 80A

0.76 V @ 160A

IRM Max. Reverse Leakage Current 5 mA T J = 25 °C (Per Leg) * See Fig. 2 (1) 200 mA T J = 125 °C CT Max. Junction Capacitance (Per Leg) 2600 pF V R = 5VDC , (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 8.0 nH Measured from terminal hole to terminal hole dv/dt Max. Voltage Rate of Change 10,000 V/ µs (Rated VR ) TJ = 25 °C TJ = 125 °C Electrical Specifications (1) Pulse Width < 300µs, Duty Cycle <2% VR = rated VR Absolute Maximum Ratings Following any rated load condition and with rated VRRM applied Parameters 160CMQ Units Conditions IF(AV) Max. Average Forward Current 160 A 50% duty cycle @ T C = 69 °C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 6400 5µs Sine or 3µs Rect. pulse Surge Current (Per Leg) * See Fig. 7 750 10ms Sine or 6ms Rect. pulse E AS Non-Repetitive Avalanche Energy 108 mJ T J = 25 °C, IAS = 16 Amps, L = 0.84 mH (Per Leg) IAR Repetitive Avalanche Current 16 A Current decaying linearly to zero in 1 µsec (Per Leg) Frequency limited by T J max. VA = 1.5 x VR typical A Part number 160CMQ035 160CMQ040 160CMQ045 VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Voltage Ratings 35 40 45 Parameters 160CMQ Units Conditions Parameters 160CMQ Units Conditions

160CNQ... Series PD-2.254 rev. A 12/97 www.irf.com Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) .01 100 1000 0 5 10 15 20 25 30 35 40 45 R R 125°C 100°C 75°C 50°C 25°C Reverse Voltage - V (V) R everse C urrent - I (m A ) T = 150°CJ .001 .01 D = 0.33 D = 0.50 D = 0.25 D = 0.17 D = 0.08 thJC t , Rectangular Pulse Duration (Seconds) Thermal Impedance - Z (°C/W) S ingle P ulse (Thermal Resistance) PDM Not es: 1. Duty factor D = t / t 2. P eak T = P x Z + T JD M thJC C Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 100 1000 FM FInstantaneous F orw ard C urrent - I (A ) Forward Voltage Drop - V (V) T = 150°C T = 125°C T = 25°C J J J 100 1000 10000 0 1 02 03 04 05 0 T = 25°CJ Reverse Voltage - V (V)R TJuncti on Capacitance - C (pF)

160CMQ... Series PD-2.254 rev. A 12/97 www.irf.com Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 8 - Unclamped Inductive Test Circuit Fig. 6 - Forward Power Loss Characteristics (Per Leg) 0 2 04 06 08 0 1 0 0 1 2 DC Average Power Loss - (Watts) F( AV) D = 0.08 D = 0.17 D = 0.25 D = 0.33 D = 0.50 RMS Limit Average Forward Current - I (A) 100 120 140 160 0 2 04 06 08 0 1 0 0 1 2 DC Al lowabl e Case Temperature - (°C) Average Forward Current - I (A )F(AV) 160CMQ R (D C) = 1.0°C/WthJC 100 1000 10000 10 100 1000 10000 FSM p Non-Repetitive Surge Current - I (A) At Any Rated Load Condition And With Rated V Applied Following Surge RRM Square Wave Pulse Duration - t (microsec) FREE-WHEEL DIODE 40HFL40S02CURRENT MONITOR HIGH-SPEED SWITCHIRFP460 L DUT Rg = 25 ohm Vd = 25 Volt+