16004 ARIES | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
- INFO@ARIESELEC.COMWWW.ARIESELEC.COM
FEATURES
- A ries DIP programmable headers offer unusual versatility for programming within the header itself
- T hey can be individually programmed using cutters or Aries programming tool, P/N T-675, available separately, to remove the interconnecting sections. Consult Data Sheet 22002 for Aries programming tool
- A djacent and/or opposing pins are interconnected until the pre-slotted section is programmed out. An almost infinite number of programs can be attained by merely leaving or removing interconnecting sections
- A low profile, snap-on cover protects header from dirt or accidental damage, and can be marked to identify the program within the header GENERAL SPECIFICATIONS
- STANDARD HEADER BODY AND COVER : black UL 94V-0 4/6 Nylon
- PINS: Brass 3/4-hard
- PIN PLATING : “-T” 200µ [5.08µ] min. matte Sn per ASTM B545-97 2004e1 over 50µ [1.27µ] min. Ni per QQ-N-290; “-G” 10µ [0.25µ] Au per MIL - G-45204 over 50µ [1.27µ] min. Ni per QQ-N-290; “-TL ” 200µ [5.08µ] 90/10 Sn/Pb per MIL -T-10727 Type I over 50µ [1.27µ] min. Ni per QQ-N- 290
- CURRENT RATING : 2 amps
- OPERATING TEMPERATURE : 221°F [105°C] Sn or Sn/Pb plating; 257°F [125°C] Au plating MOUNTING CONSIDERATIONS 16004 Rev. AA Series 675 DIP Program Headers Pins 8 , 14 & 16 only * Series Style 1 90 or 191 (see dwg) * Consult factory for other sizes
ORDERING INFORMATION
N one = A u T = S n T L = S n/Pb CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED “B” = (NO. OF PINS PER ROW -1) x 0.100 [2.54] COVERS AVAILABLE FOR 8-, 14- AND 16-PIN HEADERS. TO ORDER, SPECIFY P/N XX-650-10, WHERE “XX” DENOTES THE NUMBER OF PINS. CONSULT DATA SHEET 12033 FOR ADDITIONAL INFORMA - TION. CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS