160-41-GP

NADATASHEET HELLERMANNTYTON | Alldatasheet

Document overview

• PDF pages: 70

Technical content

Products Styles Determine which shapes suit Pages 2-3 your application and then refer to individual data sheets for appropriate sizes. Dimensions Low Profile Shape Pages 10-18 Bulbous Shapes Pages 19-58 Materials Selection Guide A wide range of materials are Pages 4 available. Specification and For specific performance Pages 6-7 Properties details refer to section pages. adhesives Selection Guide A wide range of adhesives are Page 5 available. Specification and For specific performance Pages 8-9 Properties details refer to section pages. and 60-61 MIL Spec/VG Spec Parts of similar fit & function Page 63-65 Cross Reference cross referenced from the MIL & VG Spec Tank Command Parts of similar fit & function Page 11 Cross Reference cross referenced from the Government ordnance spec. Moulded Part Bottle Shape Shapes to suit Pat 602, Page 62 Selection Guide to Suit MIL-C-26482 - I/II, MIL Spec Circular Connections Amphenol 62GB

162 GB PT, PTSE FK1, AB 05/06,

All 38999/I/II/III/IV, MS 5015 AB, Litton CIR 6 & Amphenol 67 Series MIL Spec Cross Reference Shapes to MS3109 & 3117 Page 63 Limited Fire Hazard Page 64 Boot Backshell Assemblies VG Cross Reference Page 65

150 SERIES PAGE 20

100 SERIES PAGE 21

100 SERIES PAGE 22

100 SERIES PAGE 23

(THICK WALL)

120 SERIES PAGE 24

130 SERIES PAGE 25

140 SERIES PAGE 26

LONG OUTLET SHAPES WITHOUT RIB

160 SERIES PAGE 27

170 SERIES PAGE 28

190 SERIES PAGE 29

BOTTLE SHAPE WITH EXTERNAL RIBS VG STYLE

200 SERIES PAGE 30

200 SERIES PAGE 31

200 SERIES PAGE 32

300 SERIES PAGE 33

300 SERIES PAGE 34

400 SERIES PAGE 35

400 SERIES PAGE 36

500 SERIES PAGE 37

CONVOLUTED BOOT, LOW PROFILE, WITH ADAPTER LIP 313E445 to 457 PAGE 13 SHIM BOOT, LOW PROFILE, NO ADAPTER LIP 313F322 to 396 PAGE 14 STAIGHT BOOT, LOW PROFILE, WITH ADAPTER LIP 333F232 PAGE 15 RIGHT ANGLE, BOOT 90°, LOW PROFILE, WITH ADAPTER LIP 333F322 to 385 PAGE 15 RIGHT ANGLE, BOOT 90°, LOW PROFILE, WITH ADAPTER LIP 414H622 to 625 PAGE 16 TRANSITION, T-90°, SIDE BREAKOUT, LOW PROFILE 492H412 to 415 PAGE 17 TRANSITION, 1 to 2 CABLES, Y, LOW PROFILE 573H532 to 535 PAGE 18 TRANSITION, 1 to 3 CABLES, LOW PROFILE

1300 SERIES PAGE 48

45° ANGLE T SHAPES VG STYLE

1300 SERIES PAGE 49

45° ANGLE T SHAPES VG STYLE

1310 SERIES PAGE 50

30° ANGLE DOUBLE T SHAPE

1400 SERIES PAGE 51

90° ANGLE ELBOW SHAPES

1500 SERIES PAGE 52

-D SERIES WITH TOP ENTRY

1600 SERIES PAGE 53

1750 SERIES PAGE 54

2000 SERIES PAGE 56

2100 SERIES PAGE 58

-D SERIES WITH SIDE ENTRY Note IN LINE WITH CUSTOMER DEMAND AND IN ORDER TO IMPROVE SERVICE, HELLERMANNTYTON HAS NOW ESTABLISHED A RANGE OF STANDARD PRODUCTS. THESE PRODUCTS AND MATERIALS ARE SHOWN ON THE RELEVANT PRODUCT PAGES AND ARE INDICATED*. PLEASE CONTACT YOUR LOCAL SALES PERSON FOR AVAILABILITY.

1200 SERIES PAGE 46

1200 SERIES PAGE 47

1800 SERIES PAGE 55

45° ANGLE SHAPES WITH RIB 30°, 45°, 60° 1760, 1790 PAGE 57

1820 SERIES

600 SERIES PAGE 38

1100 SERIES PAGE 39

1100 SERIES PAGE 41

1100 SERIES PAGE 40

1100 SERIES PAGE 42

1100 SERIES PAGE 43

SHAPES WITH RIB-VG/MIL STYLE

1100 SERIES PAGE 44

PROFILE HIGH RATIO WITH RIB VG STYLE

1200 SERIES PAGE 45

• OTHER PROFILES AVAILABLE ON REqUEST

HellermannTyton heatshrink moulded shapes are available in a variety of materials with a range of options. Using this guide you can select the optimum product to suit your application. 1. Material Parts can be supplied in a wide variety of materials. The product data sheets reflect material availability for each specific part. Listed below is a summary of the material specifications. To assist in your final selection, please refer to the full material specifications on pages 6-7. hellerMaNNtYtoN Moulded shaPes: Materials selectioN Guide N.B. The standard color is black but for other specialised requirements, such as red for armaments systems or blue for commercial applications, please consult your local sales person. Material Flame continuous Miniumum typical reference description retarded operating shrink specifications characteristics applications temperature °c temperature °c B7 Semi-rigid flame- Good physical & retarded polyolefin Yes -55 to +135 +135 chemical resistance G Fluid resistant Excellent resistance elastomer Yes -75 to +150 +135 to fuels J Yes -55 to +135 +135 Flexible h Flexible limited fire Low smoke, Ships, submarines hazard material Yes -55 to +105 +135 halogen free & railways B8 Semi-rigid Good physical & Power/Utility polyolefin Yes -55 to +100 +135 ESI-0911 reasonable breakout boots multi outlet l Flexible modified Excellent phyisical Fluorocarbon Yes -55 to +200 +175 & chemical resistance

9 Flexible Modified SCX15112 Good physical &

Elastomer Yes -55 to +120 +135 chemical resistance

8 SCX15111 Excellent physical &

Yes -55 to +150 +135 chemical resistance

6 SCX15112Yes -55 to +120 +135

(DEF 59-97) BSG198 Pt 5 Conforms to MIL-I-81765/4 (DEF 59-97) BSG198 Pt 5 MIL-I-81765/1 TYPE 2 (DEF 59-97) BSG198 Pt 5 Military & general high performance harnessing Fuel tanks and jet engines Military & general high performance harnessing Military high performance harnessing General harnessing

applications

Military & general high performance harnessing Military & general high performance harnessing Flexible, good physical & chemical resistance VG95343Pt6 (DEF 59-97) BSG198 Pt 5 NAVSEA5617649 (DEF 59-97) BSG198 Pt 5 Flexible cross-linked modified fluoroelastomer blend Flexible Modified Polyolefin Flexible Modified Polyolefin

1. orderiNG Procedure When ordering heatshrink shapes, it is necessary to give a complete part number to enable efficient processing of your order. Part numbers can be made up of the following typical components:- 154 - 42 - G - P - W8 Denotes the presence and type of adhesive. For filler ports, add suffix 'P' or 'D' for drain holes. Denotes material reference. L compuond shapes refere to factory when ordering Denotes expansion and special details. SELECTION GUIDE FOR MOULDED SHAPES 2. adhesives Moulded shapes can be ordered with the option of an adhesive lining. The options are: n WM250 – Hot melt adhesive. Operating temperature range -50°C to +80°C n W1 – WM250 adhesive applied to NAVSEA specification requirements n W8 – High temperature hot melt adhesive. Operating temperature range -55°C to +120°C n W24 – One part epoxy. Operating temperature range -75°C to +200°C n W2- Spiral lined Hot melt adhesive. operating temperature range -50°C to+80°C For further details on specifications and properties including epoxy adhesives, see page 8-9. 3. sPecial ModiFicatioNs Fillerports and drainholes are also available where it is desired to inject sealant. P= Filler ports for potting - 0.12 inch ø vent and 0.18 inch ø filler. D= Drain holes 4 off - 0.12 inch ø at H end equally spaced 90° apart. 4. Product stYle aNd siZe Good working practice dictates that the shape should be selected so that when it is shrunk onto the component it is 20% larger than the fully recovered dimensions stated in the catalogue. If you have any application not covered by our standard range, please refer to your local sales person. Denotes the exact shape.

test Methods: Tensile strength: IEC 540 Elongation: IEC 540 Heat Ageing: IEC 540 Heat Shock: ASTM D2671 Low Temperature Flexibility: ASTM D2671 Method C Flammability: ASTM D635 Dielectric Strength: ASTM D2671 Water Absorption: ASTM D570 Material reFereNce B7 GJ h descriPtioN Semi-rigid flame retarded Fluid resistant Flexible modified Flexible limited fire polyolefin elastomer polyolefin hazard material MiNiMuM shriNK teMP °c +135 +135 +135 +135 teMPerature raNGe °c -55 to +135 -75 to +150 -55 to +135 -55 to +105 staNdard colour Black Black Black Black uK deF staN 59-97 reF DA DE DB DF relevaNt sPeciFicatioNs qualified to MIL-I-81765/1 qualified to VG95343 Part 6 qualified to MIL-I-81765/1 qualified to VG95 343 Pt29 Type 1 Semi-rigid qualified to BSG198 Pt5 Type II Flexible Issue 3 Type DF qualified to BSG198 Pt5 Issue 3 Type DE qualified to BSG198 Pt5 Conforms to NAVSEA Issue 3 Type DA NAVSEA IA62 Issue 3 Type DB 5617649 tYPical ProPerties TENSILE STRENGTH 1885 psi 2175 psi 2030 psi 1450 psi ELONGATION 500% 580% 610% 450% HEAT AGEING 168 hours at +175°C 168 hours at +160°C 168 hours at +175°C 168 hours at +150°C ELONGATION 350% 500% 460% 430% HEAT SHOCK 4 hours at +225°C 4 hours at +215°C 4 hours at +215°C 4 hours at +215°C No dripping, flowing or Tensile Strength: 2320 PSI; No dripping, flowing or No dripping, flowing cracking Elongation: 550% cracking or cracking LOW TEMPERATURE Test temperature: -55°C Test temperature: -75°C Test temperature: -55°C Test temperature: -55°C FLEXIBILITY No cracking No cracking No cracking No cracking FLAMMABILITY Self extinguishes Self extinguishes Self extinguishes Self extinguishes within 0.60 inch within 0.60 inch within 0.60 inch within 0.60 inch DIELECTRIC STRENGTH 560V/mil 560V/mil 480V/mil 480V/mil WATER ABSORPTION 0.1% 0.1% 0.13% 0.2% solveNt resistaNce SALINE Excellent Excellent Excellent Excellent HYDRAULIC FLUID Very Good Very Good Good Good LUBRICATING OIL Very Good Very Good Good Good AVIATION FUEL Good Very Good Fair Fair AUTOMOTIVE FUEL Good Very Good Fair Fair DIESEL FUEL Good Very Good Fair Fair DE-ICING FLUID Excellent Excellent Very Good Very Good

additioNal ProPerties oF liMited Fire haZard Material (h) Toxicity Index: 1.9 Test method: NES 713 Smoke Index: 9.0 Test method: NES 711 Temperature Index: 250 Test method: NES 715 Oxygen Index: 31.4 Test method: ISO 4589 B8 l -9 -8 -6 Semi-rigid Flexible modified Modified Flexible cross-linked Flexible modified polyolefin fluorocarbon Elastomer modified fluoroelastomer polyolefin blend +135 +175 +135 +135 +135 -55 to +100 -55 to +200 -55 to +120°C -55 to +150 -55 to +120°C Black Black Black Black Black - DD N/A - N/A ESI 09-11 Conforms to BSG 198 Pt5 qualified to SCX 15112 qualified to SCX15111 Conforms to for UK Electricity Boards Issue 3 Type DD MIL-1-81765/1 Conforms to Type 1+2 MIL-1-81765/4 2175 psi 1700psi 1700 psi 3000 psi 1700 psi 500% 300% 500% 450% 500% 168 hours at +175° 168 hours at +250°C 168 hours at +100°C 168 hours at +150° 168 hours at +100°C 520% 250% 300% 350% 300% 4 hours at +225°C 4 hours at +250°C No dripping, flowing No dripping, flowing N/A N/A N/A or cracking or cracking Test temperature: -55°C Test temperature: -55°C Test temperature: -60°C Test temperature: -60°C Test temperature: -60°C No cracking No cracking No cracking No cracking No cracking Self extinguishes Non-burning (Self Self extinguishes Self extinguishes Self extinguishes within 1 inch extinguishes within 0.60 inch) within 0.60 inch within 0.60 inch within 0.60 inch 440V/mil 200V/mil 600V/mil 650V/mil 600V/mil Excellent Very Good Excellent Excellent Excellent Good Excellent Good Very Good Good Very Good Excellent Good Very Good Good Fair Excellent Fair Very Good Fair Fair Excellent Fair Very Good Fair Fair Excellent Fair Very Good Fair Very Good Excellent Very Good Excellent Very Good

TyPICAL PROPERTIES AND TESTS FOR ADHESIvES COATED TO ELECTRONIC PARTS tYPe WM250/W2-pre-applied tsa-200 -109 * Not pre-coated descriPtioN WM250/W2 is a hot melt adhesive Thermoset adhesive Reactive hot melt adhesive which has an operating range operating temperature which has an operating of -50°C to +80°C.Product is -55°C+125°C temperature range of Halogen free -55°C to +125°C relevaNt sPeciFicatioN Conforms to BSG 198 Pt5 Conforms to BSG198 Pt5 Conforms to Def.Stan 59-97 issue 3 Type S soFteNiNG PoiNt +95°C N/A N/A cure tiMe N/A 30 minutes at +150°C 30 minutes at 150°C or 2hrs at 80°C Peel streNGth XLPE/Metal 33lbs/inch XLPE/Metal 35lbs/inch XLPE / METAL 37lb/inch XLPE/XLPE 18lbs/inch XLPE/XLPE 25lbs/inch XLPE / METAL 37lb/inch PVC / PVC 14lb/inch dYNaMic shear Backshell / boot / cable 80lbs at +23°C 120lbs at +23°C 78lb at 23ºC shell size 22 laP shear XLPE/Metal 44lbs at +23°C XLPE/Metal XLPE / METAL 56lb area - (1/2" x 1") 55lbs 4hrs/+215°C XLPE / XLPE 60lb PVC / PVC 15lb therMal shocK N/A XLPE/XLPE 22lbs/inch N/A Peel strength solveNt resistaNce Fair under splash conditions Excellent Excellent under splash conditions aPPlicatioN Good general purpose adhesive Excellent for fluid resistant Reactive Hot melt adhesive bonds to most materials applications that is primarily used with low profile shapes

W24 - Pre applied W8 - Pre-applied / -450 v9500 * Not pre-coated W24 is a factory coated high performance W8 is a modified polyamide hot melt V9500 is a two part black epoxy epoxy adhesive. Operating adhesive which has an operating adhesive which has an temperature of -75°C to +200°C temperature of -55°C to +120°C. operating temperature of Product is Halogen free -75°C to +150°C. Conforms to BSG 198 Pt5 Type Conforms BSG 198 Pt5 Conforms BSG 198 Pt5 qualified to VG95343 Part 18 qualified to VG95343 T15A 0001 – +105°C – 50% of bond strength achieved N/A Product cures to a tack free condition when cool to enable movement of in 24 hours at +25°C. Heating Harnesses. Ultimate strength reached the assembly for 2 hours at +85°C in 7 days will produce accelerated curing XLPE/Metal 22lbs/inch XLPE/XLPE 20lbs/inch XLPE/XLPE 25lbs/inch XLPE/XLPE 30lbs/inch 330lb at +23°C 77lbs at +23°C 120lbs at +23°C AI/AI 1540lb at 23°C XLPE/Metal 40lbs at +23°C Metal/Metal 1540lbs at +23°C AI/AI 220lbs/inch 4 hours at 215°C N/A 4 hours / +215°C XLPE/XLPE 22lbs/inch XLPE/XLPE 22lbs/inch De-icing Fluid – Excellent Fair under splash conditions De-icing Fluid - Excellent Petrol – Excellent Gasoline - Excellent Lubricating Oil – Excellent Lubricating Oil - Excellent Hydraulic Fluid – Excellent Hydraulic Fluid - Excellent Flexible epoxy adhesive. For fluid High temperature hot melt. Excellent for fluid resistant resistant and use in harsh environments Bonds well to polythene and metals. applications and elevated temperatures. Excellent Compliments -H material fluid resistance. performs well in harsh environments and at elevated temperatures

description Government Government ordnance No. Part No. ordnance No. Part No. Straight Boot 12273147-120 313F322-9 12273147-130 313F322-8 12273147-220 313F332-9 12273147-230 313F332-8 12273147-320 313F343-9 12273147-330 313F343-8 12273147-420 313F353-9 12273147-430 313F353-8 12273147-520 313F364-9 12273147-530 313F364-8 12273147-620 313F374-9 12273147-630 313F374-8 12273147-720 313F385-9 12273147-730 313F385-8 Right Angle Boot 12273176-120 333F322-9 12273176-130 333F322-8 12273176-220 333F332-9 12273176-230 333F332-8 12273176-320 333F343-9 12273176-330 333F343-8 12273176-420 333F353-9 12273176-430 333F353-8 12273176-520 333F364-9 12273176-530 333F364-8 12273176-620 333F374-9 12273176-630 333F374-8 12273176-720 333F385-9 12273176-730 333F385-8 Convolute Boot 12273242-110 313C722-9 12273242-120 313C722-8 12273242-210 313C732-9 12273242-220 313C732-8 12273242-310 313C743-9 12273242-320 313C743-8 12273242-410 313C753-9 12273242-420 313C753-8 12273242-510 313C764-9 12273242-520 313C764-8 1271867-610 313C774-9 Transition “T” 12273162-110 412H622-9 12273162-120 412H622-8 12273162-210 412H623-9 12273162-220 412H623-8 12273162-310 412H624-9 12273162-320 412H624-8 12273162-410 412H625-9 12273162-420 412H625-8 Transition “Y” 12273148-110 492H412-9 12273148-120 492H412-8 12273148-210 492H413-9 12273148-220 492H413-8 12273148-310 492H414-9-01 12273148-320 492H414-8-01 12273148-410 492H415-9-01 12273148-420 492H415-8-01 Shim Boot 12273164-110 313E445-9 12273164-120 313E445-8 12273164-210 313E455-9 12273164-220 313E455-8 12273164-310 313E447-9 12273164-320 313E447-8 12273164-410 313E457-9 12273164-420 313E457-8 Transition 3 to 1 12273163-110 573H532-9 12273163-120 573H532-8 12273163-210 573H533-9 12273163-220 573H533-8 12273163-310 573H534-9 12273163-320 573H534-8 12273163-410 573H535-9 12273163-420 573H535-8 HEAT-SHRINkAbLE LOw PROFILE SHAPES U.S. MILITARy vEHICLE TACOM CROSS REFERENCE All crosses are accurate and true and based on revisions that were currently available, all references should be checked against latest revisions/drawings before ordering

CONvOLUTED bOOT, LOw PROFILE wITH ADAPTER LIP Materials availaBle -6 Flexible modified Polyolefin -8 Flexible cross-linked modified fluoroelastomer blend *-9 Flexible modified Elastomer adhesive oPtioNs adhesive (Part Numbers) Factory applied description TSA-200 -200 Thermoset 125°C TTS-250 -250 Thermoplastic 80°C TTS-450 -450 Thermoplastic 120°C W24 W24 1 Part Epoxy 200°C 1. All dimensions are in inches – all angles in degrees. 2. Dimensions in table: X = Expanded (minimum); R = Recovered (maximum) 3. Colour: Black This style is used with a circular grooved adapter to provide strain relief and, if adhesive is used, environmental sealing. The convoluted design provides the flexibility to accommodate different cable outlet angles. H DIA J DIA PR JO WB TS Part Number ±10% MAX ±10% MIN NOM ±0.03 ±.03 MIN X MAX R MIN X MAX R RR RRRRR

SHIM bOOT, LOw PROFILE, NO ADAPTER LIP 1. All dimensions are in inches – all angles in degrees. 2. Dimensions in table: X = Expanded (minimum); R = Recovered (maximum) 3. Colour: Black This part is normally used to build up, or shim a cable diameter to facilitate a better fit for components in a cable harness. H DIA J DIA P HO HW JW JO Part Number ±10% ±10% ±25% ±25% ±10% MIN X MAX R MIN X MAX R RRRRR Materials availaBle -6 Flexible modified Polyolefin -8 Flexible cross-linked modified fluoroelastomer blend *-9 Flexible modified Elastomer adhesive oPtioNs adhesive (Part Numbers) Factory applied description TSA-200 -200 Thermoset 125°C TTS-250 -250 Thermoplastic 80°C TTS-450 -450 Thermoplastic 120°C W24 W24 1 Part Epoxy 200°C

STRAIGHT bOOT, LOw PROFILE wITH ADAPTER LIP 1. All dimensions are in inches – all angles in degrees. 2. Dimensions in table: X = Expanded (minimum); R = Recovered (maximum) 3. Colour: Black This boot provides strain relief in applications with partially loaded connectors, resulting in small cable diameters requiring a high shrink ratio. H DIA J DIA PR T JO JW Part Number ±10% ±15% ±0.03 ±10% ±0.03 MIN X MAX R MIN X MAX R RR RR R HW +0.06 -0.03 R S +0.06 -0.03 R Materials availaBle -6 Flexible modified Polyolefin -8 Flexible cross-linked modified fluoroelastomer blend *-9 Flexible modified Elastomer adhesive oPtioNs adhesive (Part Numbers) Factory applied description TSA-200 -200 Thermoset 125°C TTS-250 -250 Thermoplastic 80°C TTS-450 -450 Thermoplastic 120°C W24 W24 1 Part Epoxy 200°C

RIGHT ANGLE, bOOT 90°, LOw PROFILE wITH ADAPTER LIP H DIA J DIA PR T JO JW Part Number ±10% ±15% ±0.03 ±10% ±0.03 MIN X MAX R MIN X MAX R RR RR R HW +0.06 -0.03 R S +0.06 -0.03 R This boot provides connector cable strain relief in applications with partially loaded connectors resulting in small cable diameters requiring a high shrink ratio. 1. All dimensions are in inches – all angles in degrees. 2. Dimensions in table: X = Expanded (minimum); R = Recovered (maximum) 3. Colour: Black Materials availaBle -6 Flexible modified Polyolefin -8 Flexible cross-linked modified fluoroelastomer blend *-9 Flexible modified Elastomer adhesive oPtioNs adhesive (Part Numbers) Factory applied description TSA-200 -200 Thermoset 125°C TTS-250 -250 Thermoplastic 80°C TTS-450 -450 Thermoplastic 120°C W24 W24 1 Part Epoxy 200°C

H DIA WP R & S J & K DIA Part Number NOM NOM NOM MIN X MAX R RR R MIN X MAX R 412H622-625 TRANSITION, SIDE bREAkOUT, LOw PROFILE 1. All dimensions are in inches – all angles in degrees. 2. Dimensions in table: X = Expanded (minimum); R = Recovered (maximum) 3. Colour: Black This style provides connector cable strain relief and is used in conjunction with a circular grooved adapter HO, JO & KO ±10% R Materials availaBle -6 Flexible modified Polyolefin -8 Flexible cross-linked modified fluoroelastomer blend *-9 Flexible modified Elastomer adhesive oPtioNs adhesive (Part Numbers) Factory applied description TSA-200 -200 Thermoset 125°C TTS-250 -250 Thermoplastic 80°C TTS-450 -450 Thermoplastic 120°C W24 W24 1 Part Epoxy 200°C

TRANSITION,

1 TO 2 CAbLES, y,

H DIA W P, R & S J & K DIA Part Number NOM NOM MIN X MAX R RR MIN X MAX R HO, JO & KO ±15% R 1. All dimensions are in inches – all angles in degrees. 2. Dimensions in table: X = Expanded (minimum); R = Recovered (maximum) 3. Colour: Black This style provides strain relief, sealing and mechanical protection on cable harness breakouts or transitions. Materials availaBle -6 Flexible modified Polyolefin -8 Flexible cross-linked modified fluoroelastomer blend *-9 Flexible modified Elastomer adhesive oPtioNs adhesive (Part Numbers) Factory applied description TSA-200 -200 Thermoset 125°C TTS-250 -250 Thermoplastic 80°C TTS-450 -450 Thermoplastic 120°C W24 W24 1 Part Epoxy 200°C

TRANSITION,

1 TO 3 CAbLES,

1. All dimensions are in inches – all angles in degrees. 2. Dimensions in table: X = Expanded (minimum); R = Recovered (maximum) 3. Colour: Black This style provides strain relief, sealing and mechanical protection on cable harness breakouts or transitions. H DIA HO, JO, P R, S & T W J, K & L DIA Part Number KO & LO NOM NOM NOM MIN X MAX R ±15% R RR R MIN X MAX R Materials availaBle -6 Flexible modified Polyolefin -8 Flexible cross-linked modified fluoroelastomer blend *-9 Flexible modified Elastomer adhesive oPtioNs adhesive (Part Numbers) Factory applied description TSA-200 -200 Thermoset 125°C TTS-250 -250 Thermoplastic 80°C TTS-450 -450 Thermoplastic 120°C W24 W24 1 Part Epoxy 200°C

150 SERIES

*Standard products and materials. Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H * NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C For VG shapes according to T07 add 'P' after Hellermann part number. Dimensions apply to all materials unless otherwise indicated and are in inches. VG 95343 T06 C 002A VG 95343 T06 B 005A VG 95343 T06 B 004A VG 95343 T06 B 003A VG 95343 T06 B 002A VG Part No. Hellermann Part No. H H -H matl J J -H matl H J P ±10% R ±10% S nom T ±20% HW ±20% JW ±20% 158-43 156-42 155-42 154-42 153-42 2.36 1.42 1.22 1.18 0.98 2.36 5.12 0.89 0.33 0.71 0.28 0.55 0.24 0.55 0.14 1.42 1.22 1.18 0.35 expanded (Min) rec'd (Max) recovered dimensions fully shrunk 1.42 1.22 1.18 0.98 1.42 1.22 1.18 0.35 0.63 0.51 For ordering procedure – refer to page 5 VG 95343 T 06 A 009 A VG 95343 T 06 B 008 A VG 95343 T 06 A 007 A VG 95343 T 06 B 006 A 159-42 158-41 157-42 3.23 2.28 2.60 2.60 2.36 1.38 1.69 3.19 1.77 0.63 3.19 2.60 3.23 2.60 2.36 1.69 2.36 1.69 2.36 1.69 160-41 Non-standard products with reduced overall lengths This style is used in conjunction with a circular grooved adaptor, providing strain relief and environmental sealing.

This style is used in conjunction with a circular grooved adaptor providing strain relief and environmental sealing. Standard products and material. Dimensions apply to all materials unless otherwise indicated and are in inches. MS 3109-14- MS 3109-15- MS 3109-13- MS 3109-12- MS 3109-11- MIL Spec No. Hellermann Part No. H -H matl J J -H matl H J P ±10% R ±10% Jo ±10% HW ±10% JW ±10% T ±10% expanded (Min) rec'd (Max) recovered dimensions fully shrunk

100 SERIES

reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C For ordering procedure – refer to page 5 1.22 1.22106-4 1.42 1.22 0.65 0.92 0.92 102-4 H

Hellermann Part No. This style is used for cable strain relief and mechanical protection. Product can be installed on the connector rear thread or plain shaft. 119-2 119-1 107-2 103-1 102-1 101-1 106-1 105-1 104-1 3.20 2.60 1.85 4.90 2.60 2.04 3.40 1.40 1.49 1.18 0.94 0.76 0.54 0.42 H H -H matl J J -H matl H J P ±10% R ±10% Jo ±10% W ±20% 3.20 2.19 118-1 107-1 103-2 102-2 101-2 106-2 105-2 104-2 expanded (Min) recovered (Max) recovered dimensions fully shrunk 0.07 Dimensions apply to all materials unless otherwise indicated and are in inches. Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and materials. For ordering procedure – refer to page 5

-H matl H J P ±10% HW ±20% JW ±20% Jo ±10% (THICk wALL) This style is used for cable strain relief and mechanical protection. Product can be installed on the connector rear thread or plain shaft. Dimensions apply to all materials unless otherwise indicated and are in inches. 1.70 0.50 0.10 0.06 1.40 H -H matlHHellermann Part No. R ±10% expanded (Min) rec'd (Max) recovered dimensions fully shrunk Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and materials. For ordering procedure – refer to page 5

120 SERIES

This style has a long tail providing extended strain relief for small diameter wires. Dimensions apply to all materials unless otherwise indicated and are in inches. Note: 120-41 and 42 are with end ribs expanded (Min) recovered (Max) recovered dimensions fully shrunk Hellermann Part No. H J H J P2 ±10% R ±10% W ±20% 120-1 0.65 0.40 0.275 0.12 ±10% — 2.40 0.75 0.04 T Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and materials. For ordering procedure – refer to page 5

130 SERIES

This style is low profile and lightweight. Typically used on airborne harnesses. The rib locates on circular backshell. expanded (Min) recovered (Max) recovered dimensions fully shrunk VG Part No. VG 95343 T06 D001A Hellermann Part No. 129-1 H 0.87 J 0.87 H 0.47 J 0.26 P ±10% 2.99 R ±10% 0.47 T ±10% 0.04 HW ±20% 0.06 JW ±20% MIL Spec. Part No. 0.04 MS3109-01 MS3109-02 MS3109-03 MS3109-04 MS3109-05 MS3109-07 MS3109-08 MS3109-09 129-4 130-4 131-4 132-2 132-3 132-4 133-2 133-3 133-4 135-2 135-4 136-2 136-4 138-4 0.88 1.01 1.16 1.34 1.34 1.34 1.47 1.47 1.47 1.97 1.97 2.76 2.47 2.73 0.88 1.01 1.16 1.34 1.34 1.34 1.47 1.47 1.47 1.97 1.97 2.76 2.47 2.73 0.45 0.59 0.74 0.90 0.82 0.90 1.06 1.06 1.16 1.48 1.62 1.69 1.85 2.15 0.25 0.29 0.33 0.38 0.35 0.38 0.37 0.37 0.41 0.51 0.56 0.69 0.69 0.70 4.17 4.77 5.46 1.38 2.36 6.28 1.85 2.36 7.00 1.73 7.99 4.92 8.00 8.00 0.46 0.48 0.48 0.48 0.48 0.48 0.55 0.55 0.55 0.60 0.60 0.63 0.63 0.63 0.04 0.04 0.04 0.04 0.04 0.04 0.06 0.06 0.06 0.06 0.06 0.08 0.08 0.08 0.06 0.06 0.07 0.07 0.07 0.07 0.08 0.08 0.08 0.09 0.09 0.10 0.10 0.10 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.06 0.06 0.06 0.06 0.06 For VG shapes according to T07 add 'P' after Hellermann part number. Dimensions apply to all materials unless otherwise indicated and are in inches. Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and materials. For ordering procedure – refer to page 5

140 SERIES

This style is low profile, lightweight with extended strain relief. Dimensions apply to all materials unless otherwise indicated and are in inches. expanded (Min) recovered (Max) recovered dimensions fully shrunk 148-2 149-1 150-1 Hellermann Part No. H J H J P ±10% R ±10% W ±20% Materials availaBle reference specification description J MIL-I-81765/TYPE II Flexible modified polyolefin B7 MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C For ordering procedure – refer to page 5

160 SERIES

This style is a straight boot used for cable strain relief and environmental protection. Dimensions apply to all materials unless otherwise indicated and are in inches. expanded (Min) recovered (Max) recovered dimensions fully shrunk Hellermann Part No. H J H J P ±10% R ±10% W ±20% Materials availaBle reference specification description J MIL-I-81765/TYPE II Flexible modified polyolefin B7 MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C For ordering procedure – refer to page 5

170 SERIES

This style provides cable strain relief in applications of partially loaded connectors, resulting in small cable diameters. Dimensions apply to all materials unless otherwise indicated and are in inches Note: 1724 and 1738 are without end ribs. expanded (Min) recovered (Max) recovered dimensions fully shrunk VG Part No. VG 95343 T06 D011A 176-1 1738-1— 1724-1— 0.76 0.79 0.79 0.25 0.79 0.79 0.51 0.65 0.65 0.08 0.18 0.18 2.37 1.26 1.65 0.46 0.39 0.79 0.04 0.00 0.00 1.48 0.87 0.39 0.06 0.04 0.04 0.04 0.04 0.04 — 176-2 0.76 0.25 0.51 — 176-4 0.76 0.25 Hellermann Part No. H J H J P ±10% R ±10% T ±10% Jo ±10% HW ±20% JW ±20% Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and materials. For ordering procedure – refer to page 5

190 SERIES

Developed specifically for small audio connectors. External Ribs improve grip. Dimensions apply to all materials unless otherwise indicated and are in inches. expanded (Min) recovered (Max) recovered dimensions fully shrunk VG Part No. Hellermann Part No. H J H J P ±10% R ±10% S ±10% T ±10% X nom HW ±20% JW ±20% Materials availaBle reference specification description J MIL-I-81765/TYPE II Flexible modified polyolefin B7 MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard material. For ordering procedure – refer to page 5

200 SERIES

mechanical protection. Dimensions apply to all materials unless otherwise indicated and are in inches. expanded (Min) recovered (Max) rec'd dimensions fully shrunk Hellermann Part No. H J K H J K P ±10% R ±10% W ±20% Materials availaBle reference specification description J MIL-I-81765/TYPE II Flexible modified polyolefin B7 MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C For ordering procedure – refer to page 5

sealing, strain relief and mechanical protection. Dimensions apply to all materials unless otherwise indicated and are in inches. H Expanded is maximum width not diameter. VG Part No. 227-1 206-1 0.51VG 95343 T08 C001A Hellermann Part No. H H -H Matl J,K J,K -H Matl H J,K P ±10% R ±10% HW ±30% JW, KW ±30% expanded (Min) recovered (Max) recovered dimensions fully shrunk For VG shapes according to TO9 add 'P' after Hellermann part number. Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and materials. For ordering procedure – refer to page 5

mechanical protection. Ideal for power and signal applications. Dimensions apply to all materials unless otherwise indicated and are in inches. expanded (Min) recovered (Max) recovered dimensions fully shrunk NAVSEA REFERENCE Hellermann Part No. H H -H Matl J J -H Matl H J P ±10% R ±10% S (nom) HW ±20% W ±20% Materials availaBle reference specification description J MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material B8 Semi-rigid polyolefin adhesive coatiNG oPtioNs reference description W1 Band lined WM250 *Standard products and material. For ordering procedure – refer to page 5

300 SERIES

mechanical protection. Dimensions apply to all materials unless otherwise indicated and are in inches. expanded (Min) recovered (Max) recovered dimensions fully shrunk VG Part No. Hellermann Part No. H J,K,L H J,K,L P ±10% R ±10% T ±10% HW ±20% W ±20% Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and materials. For ordering procedure – refer to page 5

mechanical protection. Covers a wide range of cable diameters. Ideal for power and signal applications. expanded (Min) recovered (Max) recovered dimensions fully shrunk NAVSEA REFERENCE Hellermann Part No. H J H J S (Nom) P ±10% R ±10% HW ±20% W ±20% 339-2 319-2 320-1 328-2 355-1 342-1 330-2 340-2 341-2 323-1 IA62-5 IA62-7 IA62-6 IA62-8 IA62-9 IA62-10 IA62-11 Dimensions apply to all materials unless otherwise indicated and are in inches. Materials availaBle reference specification description J MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material B8 Semi-rigid polyolefin adhesive coatiNG oPtioNs reference description W1 Band lined WM250 *Standard products and material. For ordering procedure – refer to page 5

400 SERIES

mechanical protection. expanded (Min) recovered (Max) recovered dimensions fully shrunk VG Part No. Hellermann Part No. H J,K,L,N H J,K,L,N P ±15% T ±10% S ±10% R ±10% HW ±30% JW ±30% VG 95343 T08E 002A 411-1 0.75 VG 95343 T08E 005A 413-1 Dimensions apply to all materials unless otherwise indicated and are in inches. Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and materials. For ordering procedure – refer to page 5

expanded (Min) recovered (Max) recovered dimensions fully shrunk NAVSEA REFERENCE IA62-12 mechanical protection. Ideal for power and signal applications. Part No H J H J P ±10% R ±10% S (nom) HW ±20% JW ±20% IA62-13 IA62-15 Dimensions apply to all materials unless otherwise indicated and are in inches. 0.13 IA62-17 * 0.16 Materials availaBle reference specification description J MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material B8 Semi-rigid polyolefin adhesive coatiNG oPtioNs reference description W1 Band lined WM250 *Standard products and material. For ordering procedure – refer to page 5 436-2

500 SERIES

sealing, strain relief and mechanical protection. Ideal for power and signal applications. expanded (Min) recovered (Max) recovered dimensions fully shrunk Hellermann Part No. H H -H Matl J J -H Matl H J S (Nom) P ±10% R ±10% HW ±20% JW ±20% Dimensions apply to all materials unless otherwise indicated and are in inches. Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material B8 Semi-rigid polyolefin adhesive coatiNG oPtioNs reference description W1 Band lined WM250 *Standard materials. For ordering procedure – refer to page 5

600 SERIES

mechanical protection. Ideal for power and signal cables. expanded (Min) recovered (Max) recovered dimensions fully shrunk NAVSEA REFERENCE Hellermann Part No. H J H J S (nom) P ±10% R ±10% HW ±20% JW ±20% IA62-18 Dimensions apply to all materials unless otherwise indicated and are in inches. Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material B8 Semi-rigid polyolefin adhesive coatiNG oPtioNs reference description W1 Band lined WM250 *Standard products and material. For ordering procedure – refer to page 5

1100 SERIES

This style provides strain relief for harness systems when used in conjunction with a circular grooved adaptor. dimensions in inches expanded (Min) recovered (Max) recovered dimensions fully shrunk VG Part No. Hellermann Part No. H J H J P ±10% R ±10% S ±10% Jo ±10% HW ±20% JW ±20% T ±10% VG 95343 T06 E001A VG 95343 T06 E005A VG 95343 T06 E007A VG 95343 T06 E002A VG 95343 T06 E004A VG 95343 T06 E006A VG 95343 T06 E008A Dimensions apply to all materials unless otherwise indicated and are in inches. For VG shapes according to T07 add 'P' after Hellermann part number. Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H * NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and materials. For ordering procedure – refer to page 5

This style provides connector cable strain relief. Can be installed directly onto connector rear thread. Dimensions apply to all materials unless otherwise indicated and are in inches. expanded (Min) recovered (Max) recovered dimensions fully shrunk VG Part No. VG 95343 T06 J003A VG 95343 T06 J008A VG 95343 T06 J004A Hellermann Part No. H J H J P ±10% R ±10% S ±10% Jo ±10% HW ±30% JW ±30% 1113-1 1118-1 Materials availaBle reference specification description J MIL-I-81765/TYPE II Flexible modified polyolefin B7 MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C For ordering procedure – refer to page 5

This style provides strain relief for harness systems when used in conjunction with a circular grooved adaptor. Dimensions apply to all materials unless otherwise indicated and are in inches. expanded (Min) recovered (Max) recovered dimensions fully shrunk MIL Spec No. 1103-4 1104-4 1108-4 MS3117-15 MS3117-16 MS3117-17 MS3117-14 MS3117-13 Hellermann Part No. H J H J P ±10% R ±10% S ±10% Jo ±10% W ±20% T ±20% 2.04 2.04 1.38 2.60 2.60 1.75 0.80 1101-4 1105-4 1109-4 Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and materials. For ordering procedure – refer to page 5

This style provides connector cable strain relief. Can be installed directly onto connector rear thread. 1108-1 1108-2 1106-2 1107-2 1104-2 1103-2 1101-2 1105-2 1109-3 1106-1 1107-1 1104-1 1103-1 1101-1 1105-1 1109-2 1109-1 0.54 0.76 1.25 1.20 1.50 1.85 3.00 Hellermann Part No. H J H J P ±10% R ±10% S ±10% Jo ±10% W ±10% 1.25 0.70 0.28 1.40 0.75 0.88 0.33 1.70 0.90 1.10 0.38 2.18 1.40 1.38 0.62 3.10 3.00 1.75 0.80 3.84 1.20 0.81 0.34 0.07 1.40 0.90 0.50 0.07 1.70 1.10 0.62 0.08 2.10 1.30 1.20 0.13 2.60 1.64 1.60 0.15 Dimensions apply to all materials unless otherwise indicated and are in inches expanded (Min) recovered (Max) recovered dimensions fully shrunk Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and materials. For ordering procedure – refer to page 5

This style is typically used on airborne harnesses to achieve low profile , compact strain relief and mechanical protection. VG shapes according to T07 add 'P' after Hellermann Part Number. expanded (Min) recovered (Max) recovered dimensions fully shrunk VG Part No. MIL Spec. No. VG 95343 T06 F001 MS 3117-01- VG 95343 T06 F002 VG 95343 T06 F004 VG 95343 T06 F006 VG 95343 T06 F008 VG 95343 T06 F010 VG 95343 T06 F003 VG 95343 T06 F005 VG 95343 T06 F007 VG 95343 T06 F009 1121-1 1122-1 1124-1 1126-1 1128-1 1141-1 1123-1 1125-1 1127-1 1129-1 MS 3117-02- MS 3117-04- MS 3117-07 MS 3117-08- MS 3117-09- MS 3117-03- MS 3117-05- MS 3117-06 1124-4 1125-2 1127-4 1128-4 1129-4 1123-4 1125-4 1126-4 1127-3 Hellermann Part No. H J H J P ±10% R ±10% T ±10% HW ±20% JW ±30% Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and materials. For ordering procedure – refer to page 5 Dimensions apply to all materials unless otherwise indicated and are in inches.

This style provides connector cable strain relief. Used in applications of partially loaded connectors with small cable diameters. expanded (Min) recovered (Max) recovered dimensions fully shrunk VG Part No. Hellermann Part No. H J H J P ±10% R ±10% Jo ±10% T ±10% HW ±20% JW ±20% VG 95343 T06 F011A VG 95343 T06 F013A VG 95343 T06 F014A VG 95343 T06 F012A Dimensions apply to all materials unless otherwise indicated and are in inches. Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard material. For ordering procedure – refer to page 5

1200 SERIES

-vG STyLE This style provides strain relief, sealing and mechanical protection on cable harnesses. expanded (Min) recovered (Max) recovered dimensions fully shrunk VG Part No. Hellermann Part No. H J K H J K P ±10% R ±10% S ±10% KW +20% HW, JW +20% VG 95343 T08 A010A 1202-1 VG 95343 T08 A007A VG 95343 T08 A002A VG 95343 T08 A011A 1205-1 1201-1 1209-1 1207-1 1230-1 1.06 0.78 1.06 0.78 1.06 0.78 0.49 0.40 0.49 0.40 0.49 0.40 4.73 3.54 2.20 1.77 2.20 1.77 0.10 0.08 0.10 0.08 Dimensions apply to all materials unless otherwise indicated and are in inches. VG shapes according to T09 add 'P' after Hellermann part number Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and material. For ordering procedure – refer to page 5

This style provides strain relief, sealing and mechanical protection on cable harness. Dimensions apply to all materials unless otherwise indicated and are in inches. expanded (Min) recovered (Max) recovered dimensions fully shrunk Hellermann Part No. H J K H J K P ±10% R ±10% S ±10% HW ±20% JW ±20% KW ±20% 1222-1 1223-1 Materials availaBle reference specification description J MIL-I-81765/TYPE II Flexible modified polyolefin B7 MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C For ordering procedure – refer to page 5

This style provides strain relief, sealing and mechanical protection on cable harnesses. Dimensions apply to all materials unless otherwise indicated and are in inches. expanded (Min) recovered (Max) recovered dimensions fully shrunk VG Part No. Hellermann Part No. H J K H J K P ±10% R ±10% S ±10% HW ±20% JW ±20% KW ±20% VG 95343 T08 A017A 1216-1 1226-1 Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C For ordering procedure – refer to page 5*Standard products and material.

1300 SERIES

45° ANGLE T SHAPES - vG STyLE This style provides strain relief, sealing and mechanical protection on cable harnesses. expanded (Min) recovered (Max) recovered dimensions fully shrunk VG Part No. Hellermann Part No. H J K H J K P ±10% R ±10% S ±10% HW ±20% JW ±20% KW ±20% VG 95343 T08 B001A 1301-1 hellermann Part No. angle 1301-1 45° 1302-1 45° 1303-1 45° 1311-1 30° Dimensions apply to all materials unless otherwise indicated and are in inches. VG shapes according to T09 add 'P' after Hellermann part number. Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and material. For ordering procedure – refer to page 5 0.51

45° ANGLE T SHAPE - vG STyLE This style provides strain relief, sealing and mechanical protection on cable harness. expanded (Min) recovered (Max) recovered dimensions fully shrunk VG Part No. Hellermann Part No. H J K H J K P ±10% R ±10% S ±10% HW ±20% JW ±20% KW ±20% Dimensions apply to all materials unless otherwise indicated and are in inches. Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and material. For ordering procedure – refer to page 5

1310 SERIES

30° ANGLE DOUbLE T SHAPE This special style provides strain relief, sealing and mechanical protection on cable harness. Dimensions apply to all materials unless otherwise indicated and are in inches. expanded (Min) recovered (Max) recovered dimensions fully shrunk Hellermann Part No. H, J K, L H, J K, L P ±10% R ±10% S ±10% T ±10% HW,JW ±20% KW,LW ±20% Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard material. For ordering procedure – refer to page 5

1400 SERIES

90° ANGLE ELbOw SHAPES This style provides cable strain relief and mechanical protection. expanded (Min) recovered (Max) recovered dimensions fully shrunk Hellermann Part No. H J H J P ± 10% R ± 10% W ± 20% Dimensions apply to all materials unless otherwise indicated and are in inches. Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and material. For ordering procedure – refer to page 5

1500 SERIES

This style provides strain relief and mechanical protection. With liPs expanded (Min) recovered (Max) recovered dimensions fully shrunk Without liPs Hellermann Part No. H J K H J K P ±10% R ±10% W ±10% Connector Size No. of Ways Dimensions apply to all materials unless otherwise indicated and are in inches. Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard products and material. For ordering procedure – refer to page 5

1600 SERIES

This style has a conical end and is used for sealing cables. exp'd (Min) recovered (Max) recovered dimensions fully shrunk Hellermann Part No. H H J P ±10% R ±10% W ±20% For Cable Diameters End caps with the exception of 1612, 1618 and 1633 can be fitted with air valves for certain pressurized cable applications. Consult your master distributor for availability. Dimensions apply to all materials unless otherwise indicated and are in inches. Materials availaBle reference specification description J MIL-I-81765/TYPE II Flexible modified polyolefin B7 MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer B8 * Semi-rigid polyolefin adhesive coatiNG oPtioNs reference description W General purpose hot melt +80°C *Standard products and material. For ordering procedure – refer to page 5

1750 SERIES

This style is ideally suited for shipboard and railway carriage cabling. Key Features: n Very robust n Superior crush resistance n Excellent strain relief n Wall thickness varies with long thin tail allowing setting at varying angles through to 90° Dimensions apply to all materials unless otherwise indicated and are in inches. expanded (Min) recovered (Max) recovered dimensions fully shrunk NAVSEA REFERENCE 5617649-1 5617649-2 5617649-3 5617649-4 5617649-5 Hellermann Part No. H J H J P ±10% R ±10% S ±10% T ±10% HW ±20% JW ±20% Materials availaBle reference specification description J MIL-I-81765/TYPE II Flexible modified polyolefin B7 MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H * NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard material. For ordering procedure – refer to page 5

1800 SERIES

30°, 45° & 60° This style provides strain relief, mechanical protection for harness systems when used in conjunction with a circular grooved adaptor. Dimensions apply to all materials unless otherwise indicated and are in inches. expanded (Min) rec'd (Max) recovered dimensions fully shrunk Angle Nominal Hellermann Part No. H H -H Matl J J -H Matl H J P ±10% R ±10% T ±10% HW ±10% JW ±20% 45° 1806-4 Materials availaBle reference specification description J * MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard material. For ordering procedure – refer to page 5

2000 SERIES

Dimensions apply to all materials unless otherwise indicated and are in inches. This style provides environmental sealing, mechanical protection, allowing wires to be routed in four 90° directions. Hellermann Part No. H, J K, L H, J K, L P ±10% R ±10% S ±10% W ±10% Materials availaBle reference specification description J MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard material. For ordering procedure – refer to page 5 expanded (Min) rec'd (Max) recovered dimensions fully shrunk

expanded (Min) rec'd (Max) recovered dimensions fully shrunk Hellermann Part No. expanded (Min) rec'd (Max) recovered dimensions fully shrunk Dimensions apply to all materials unless otherwise indicated and are in inches. Dimensions apply to all materials unless otherwise indicated and are in inches. 1760, 1790, This style provides location, cushioning shimming and protection on cable lengths. This style suits non round cable bundles H Min H Max P ±10% R ±10% U ±10% V ±10% Hw ±20% 1.42 Hellermann Part No. 1795-3 1793-3 1796-3 H Min 0.47 0.63 1822-2 1823-3 J Min 0.47 0.63 H Max 0.23 0.30 J Max 0.40 0.48 K ±10% 0.47 0.55 P Max 1.18 1.26 R ±10% 0.95 0.95 U ±10% 0.08 0.098 V ±10% 0.19 0.16 Materials availaBle reference specification description J MIL-I-81765/TYPE II Flexible modified polyolefin B7 * MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G * VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesixve coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C *Standard material. For ordering procedure – refer to page 5

2100 SERIES

wITH 90° ENTRy This style provides strain relief and mechanical protection. Dimensions apply to all materials unless otherwise indicated and are in inches. With liPs expanded (Min) recovered (Max) recovered dimensions fully shrunk Without liPs expanded (Min) recovered (Max) recovered dimensions fully shrunk 2101-2 2102-1 2102-2 2103-1 2103-2 2103-3 2104-1 2105-1 2105-2 2105-3 Hellermann Part No. H H -H Matl J J -H Matl K K -H Matl H J K S ±10% P ±10% R ±10% X ±10% W ±20% Connector size No. of ways Materials availaBle reference specification description J MIL-I-81765/TYPE II Flexible modified polyolefin B7 MIL-I-81765/TYPE I Semi-rigid flame retarded polyolefin G VG 95343 PART 6 Fluid resistant elastomer H NAVSEA 5617649 Flexible limited fire hazard material adhesive coatiNG oPtioNs reference description WM250 General purpose hot melt +80°C W8 High performance hot melt +105°C W24 1 Part Epoxy 200°C For ordering procedure – refer to page 5

Products listed below in VG Style or MIL Spec Style can be substituted with each other, to achieve similar fit and function. Note:- These have a longer overall length than VG parts

HMT200A is a hot melt adhesive tape which is designed for use with heatshrink tubing and mouldings. The adhesive tape flows when heated to provide a permanent air and water tight seal. hot melt adhesive is available as tape and is designed to be used primarily in conjunction with heatshrinkable tubing and moulded shapes in order to provide sealant / adhesive action at the interface between the encapsulant and the substrate. The adhesive is a specially compounded blend of resins which melts below the shrinkage temperature of heat shrinkable polyolefin products (+135°C) and also bonds to the polyolefin surface and the wide variety of substrate surfaces to which it is applied, eg cable jackets, metal sheaths and connector back shells. HMT200A will maintain its adhesive sealant properties from -55° to +105°C. Method of application tape form hMt200a. Nominal dimensions 1.00 inch wide, 0.01 inch thick, nominally 100ft per reel. 1. Substrate surfaces should be clean and free from grease and dirt. If necessary, wipe with a suitable solvent. 2. The substrate should be pre-warmed to reduce its effect as a heat sink. 3. The HMT200A tape should be wrapped once, under slight tension, around the warm substrate with a minimum overlap. When soft it can be pressed into position. 4. Heatshrink is then placed over the assembly and recovered by heating. 5. After the component has been recovered, heating must be continued to ensure that the tape has completely melted, thus ensuring correct bonding. 6. Any rearrangement of the assembly after the heat-shrinkable component has been positioned must be done whilst the sealant is still molten and the encapsulation is above 120°C. Once set, no stresses should be applied to the assembly until it has completely cooled. Note: 1. Substrates with considerable heat sink characteristics should be pre-warmed. This type of assembly may require even longer post-shrinkage heating to ensure that the HMT200A tape has melted. typical Properties tsa200taPe hMt200a operating temperature -55°C to +125°C -55°C to +105°C softening Point N/A +110°C Peel strength XLPE/Metal 35lbs/inch 33lbs/inch XLPE/XLPE 25lbs/inch 18lbs/inch PVC/PVC 13lbs/inch 13lbs/inch lap shear strength XLPE/Metal 60lbs 55lbs XLPE/XLPE 55lbs 36lbs shelf life 2 Years 2 Years colours: Natural Natural installation guide for tsa200 tape on request

V9500 epoxy adhesive is available in two forms: 1) 1x duo Pak (50g), 5x mixing pots,5x mixing sticks, 5, emery papers order V9500 Epoxy adhesive kit. 2) 50gm twin plunger Duo Pak with mixing crucibles, emery cloth and spatulas. Order ref V9500 DP KIT. hellermann duo Pak is ideal for volume applications. Features include:

• Accurate dispensing - no need for any weighing of components.
• No mixing is necessary when using the nozzle.
• Less adhesive waste.
• Unique end cap assures proper sealing for multiple uses.
• Contains 50gms equivalent to 5 x 10gm sachets.
• Positive locking of mixing nozzle. V 9500 Nozzle New V 9500 DUO PAK V 9500 Applicator shelf life: The product should be stored in its original packaging at temperatures between +14°C – +26°C. Minimum shelf life of 18 months. For applications of adhesive see the code of practice which is available from your master distributor. qualified to VG 95343 T15A0001. Part Numbers v9500 duo PacK 50gm twin plunger Duo Pak v9500 NoZZle NeW Nozzle for 50gm twin plunger v9500 aPPlicator Applicator for V9500 DUO PAK v9500 dP Kit 50gm twin plunger Duo pak with mixing crucibles,emery cloth and spatulas

*10 SL 0.62 connector shell size o/Knurl dia (inches) 153-42 *1152-4/1106-4 *0.16 0.30 Straight 90° Min orientation cable dia (inches) Max 14 S 0.76 154-42/106-4 1154-4/1107-4 0.28 0.42 16 S 0.95 155-42/101-4 1155-4/1104-4 0.33 0.53 16 0.95 155-42/101-4 1155-4/1104-4 0.33 0.53 18 0.95 155-42/101-4 1155-4/1104-4 0.33 0.57 20 1.17 156-42/102-4 1156-4/1103-4 0.40 0.74 22 1.17 156-42/102-4 1156-4/1103-4 0.40 0.82 24 1.49 157-43/103-4 1157-4/1101-4 0.47 0.97 28 1.49 157-43/103-4 1157-4/1101-4 0.47 1.06 32 1.89 158-43/107-4 1158-4/1105-4 0.76 1.31 * Note: Shell 10 SL for 90° moulded part min cable diameter 0.260 inches 1.89 158-43/107-4 1158-4/1105-4 0.76 1.51 8/9 0.51 connector shell size o/Knurl dia (inches) 152-42/105-4 1152-4/1106-4 0.28 0.27 Straight 90° Min orientation cable dia (inches) Max 10/11 0.60 152-42/105-4 1152-4/1106-4 0.28 0.40 10/12 0.60/0.75 153-42/NA — 0.16 0.40 12/13 0.75 154-42/106-4 1154-4/1107-4 0.28 0.53 14/15 0.82 155-42/101-4 1155-4/1104-4 0.33 0.64 16/17 0.94 155-42/101-4 1155-4/1104-4 0.33 0.76 18/19 1.02 156-42/102-4 1156-4/1103-4 0.40 0.86 20/21 1.20 156-42/102-4 1156-4/1103-4 0.40 0.98 22/23 1.34 157-43/103-4 1157-4/1101-4 0.47 1.12 24/25 1.42 157-43/103-4 1157-4/1101-4 0.47 1.22 hellerMaNN shaPes For use With circular Mil sPec coNNectors Ms 5015 aB/littoN etc. hellerMaNN shaPes For use With Mil-c-26482-i/ii and 38999/series i, ii, iii, iv

63Note: L denotes the MIL Spec Stripes MIL SPEC SLASH SHEET CROSS REFERENCE bULbOUS SHAPES Bottle shapes with rib ‘J’ or ‘B7’ Material J=Red stripe B7=White stripe Optional drainholes (D) Low profile long outlet bottle shapes with rib ‘J’ or ‘B7’ material J=Red stripe B7=White stripe Supplied with drainholes (D) Right angle shapes with rib ‘J’ or ‘B7’ material J=Red stripe B7=White stripe Optional drainholes (D) Right angles shapes Low profile with rib ‘J’ or ‘B7’ material J=Red stripe B7=White stripe Supplied with drainholes (D) MS3109 105-4-JL –11AU 105-4-B7L –11BU 106-4-JL –12AU 106-4-B7L –12BU 101-4-JL –13AU 101-4-B7L –13BU 102-4-JL –14AU 102-4-B7L –14BU 103-4-JL –15AU 103-4-B7L –15BU 107-4-JL –16AU 107-4-B7L –16BU 118-4-JL –17AU 118-4-B7L –17BU 129-4-JDL –01AU 129-4-B7DL –01BU 130-4-JDL –02AU 130-4-B7DL –02BU 131-4-JDL –03AU 131-4-B7DL –03BU 132-4-JDL –04AU 132-4-B7DL –04BU 133-4-JDL –05AU 133-4-B7DL –05BU 134-4-JDL –06AU 134-4-B7DL –06BU 135-4-JDL –07AU 135-4-B7DL –07BU 136-4-JDL –08AU 136-4-B7DL –08BU 138-4-JDL –09AU 138-4-B7DL –09BU 187-4-JDL –10AU 187-4-B7DL –10BU MS3117 1106-4-JL –11AU 1106-4-B7L –11BU 1107-4-JL –12AU 1107-4-B7L –12BU 1104-4-JL –13AU 1104-4-B7L –13BU 1103-4-JL –14AU 1103-4-B7L –14BU 1101-4-JL –15AU 1101-4-B7L –15BU 1105-4-JL –16AU 1105-4-B7L –16BU 1109-4-JL –17AU 1109-4-B7L –17BU 1121-4-JDL –01AU 1121-4-B7DL –01BU 1122-4-JDL –02AU 1122-4-B7DL –02BU 1123-4-JDL –03AU 1123-4-B7DL –03BU 1124-4-JDL –04AU 1124-4-B7DL –04BU 1125-4-JDL –05AU 1125-4-B7DL –05BU 1126-4-JDL –06AU 1126-4-B7DL –06BU 1127-4-JDL –07AU 1127-4-B7DL –07BU 1128-4-JDL –08AU 1128-4-B7DL –08BU 1129-4-JDL –09AU 1129-4-B7DL –09BU

hsK – 90° HSK assemblies provide an alternative solution to standard saddle clamps which can corrode over extended use. They provide strain relief and form an environmental seal. The spin coupler allows re-entry to the connector after many years of service. HSK assembly kits are available in straight or 90°. They mate to connectors according to BS 9522, F0032 and VG 95-234, typically VEAM CIR, Amphenol Series 97, and ABB MS. For assemblies to suit other Mil Spec Connectors and materials, consult your master distributor. Part No. Shell Size Max B Min A J P +/-10% Min Max Part No. Shell Size Max B Min A J P +/-10% B 1.62 1.73 2.05 2.05 2.05 2.32 2.32 2.68 2.76 3.23 3.23 3.19 L +/-10% B Min Max 1. HSK assemblies meet the sealing requirements of VG95234. 2. HSK 1601-1624 use -H material. Dimensions apply to all materials unless otherwise indicated and are in inches. Cable Range Cable Range hsK – straight

vG Part No. Part Number VG 95343 T06 A001A 152-41-G VG 95343 T06 A002A 153-41-G VG 95343 T06 A003A 154-41-G VG 95343 T06 A004A 155-41-G VG 95343 T06 A005A 156-41-G VG 95343 T06 A006A 157-41-G VG 95343 T06 A007A 158-41-G VG 95343 T06 A008A 159-41-G VG 95343 T06 A009A 160-41-G VG 95343 T06 A010A 199-4-G VG 95343 T06 B001A 152-42-G VG 95343 T06 B002A 153-42-G VG 95343 T06 B003A 154-42-G VG 95343 T06 B004A 155-42-G VG 95343 T06 B005A 156-42-G VG 95343 T06 B006A 157-42-G VG 95343 T06 B007A 158-42-G VG 95343 T06 B008A 159-42-G VG 95343 T06 B009A 160-42-G VG 95343 T06 C001A 157-43-G VG 95343 T06 C002A 158-43-G VG 95343 T06 C003A 159-43-G VG 95343 T06 C004A 160-43-G VG 95343 T06 D001A 129-1-G VG 95343 T06 D002A 130-1-G VG 95343 T06 D003A 131-1-G VG 95343 T06 D004A 132-1-G VG 95343 T06 D005A 133-1-G VG 95343 T06 D006A 134-1-G VG 95343 T06 D007A 135-1-G VG 95343 T06 D008A 136-1-G VG 95343 T06 D009A 138-1-G VG 95343 T06 D010A 187-1-G VG 95343 T06 D011A 176-1-G VG 95343 T06 D012A 177-1-G VG 95343 T06 D013A 178-1-G VG 95343 T06 D 014A 179-1-G VG 95343 T06 E001A 1152-4-G VG 95343 T06 E002A 1154-4-G VG 95343 T06 E003A 1155-4-G VG 95343 T06 E004A 1156-4-G VG 95343 T06 E005A 1157-4-G VG 95343 T06 E006A 1158-4-G VG 95343 T06 E007A 1159-4-G VG 95343 T06 E008A 1160-4-G vG Part No. Part Number VG 95343 T06 F001A 1121-1-G VG 95343 T06 F002A 1122-1-G VG 95343 T06 F003A 1123-1-G VG 95343 T06 F004A 1124-1-G VG 95343 T06 F005A 1125-1-G VG 95343 T06 F006A 1126-1-G VG 95343 T06 F007A 1127-1-G VG 95343 T06 F008A 1128-1-G VG 95343 T06 F009A 1129-1-G VG 95343 T06 F010A 1141-1-G VG 95343 T06 F011A 1133-1-G VG 95343 T06 F012A 1134-1-G VG 95343 T06 F013A 1135-1-G VG 95343 T06 F014A 1136-1-G VG 95343 T06 J002A 1112-1-G VG 95343 T06 J004A 1114-1-G VG 95343 T06 J006A 1116-1-G VG 95343 T06 J007A 1117-1-G VG 95343 T06 J008A 1118-1-G VG 95343 T07 A001A 152-41-GP VG 95343 T07 A002A 153-41-GP VG 95343 T07 A003A 154-41-GP VG 95343 T07 A004A 155-41-GP VG 95343 T07 A005A 156-41-GP VG 95343 T07 A006A 157-41-GP VG 95343 T07 A007A 158-41-GP VG 95343 T07 A008A 159-41-GP VG 95343 T07 A009A 160-41-GP VG 95343 T07 B001A 152-42-GP VG 95343 T07 B002A 153-42-GP VG 95343 T07 B003A 154-42-GP VG 95343 T07 B004A 155-42-GP VG 95343 T07 B005A 156-42-GP VG 95343 T07 B006A 157-42-GP VG 95343 T07 B007A 158-42-GP VG 95343 T07 B008A 159-42-GP VG 95343 T07 B009A 160-42-GP VG 95343 T07 C001A 157-43-GP VG 95343 T07 C002A 158-43-GP VG 95343 T07 C003A 159-43-GP VG 95343 T07 C004A 160-43-GP VG 95343 T07 F003A 1123-4-GP VG 95343 T07 F004A 1124-4-GP VG 95343 T07 F005A 1125-4-GP VG 95343 T07 F006A 1126-4-GP VG 95343 T07 F007A 1127-4-GP VG 95343 T07 F008A 1128-4-GP VG 95343 T07 F009A 1129-4-GP VG 95343 T07 F010A 1141-4-GP VG 95343 T08 A001A 1203-1-G vG Part No. Part Number VG 95343 T07 D001A 129-1-GP VG 95343 T07 D002A 130-1-GP VG 95343 T07 D003A 131-1-GP VG 95343 T07 D004A 132-1-GP VG 95343 T07 D005A 133-1-GP VG 95343 T07 D006A 134-1-GP VG 95343 T07 D007A 135-1-GP VG 95343 T07 D008A 136-1-GP VG 95343 T07 D009A 138-1-GP VG 95343 T07 D010A 187-1-GP VG 95343 T07 E001A 1152-4-GP VG 95343 T07 E002A 1154-4-GP VG 95343 T07 E003A 1155-4-GP VG 95343 T07 E004A 1156-4-GP VG 95343 T07 E005A 1157-4-GP VG 95343 T07 E006A 1158-4-GP VG 95343 T07 E007A 1159-4-GP VG 95343 T07 E008A 1160-4-GP VG 95343 T07 F001A 1121-4-GP VG 95343 T07 F002A 1122-4-GP VG 95343 T08 A002A 1209-1-G VG 95343 T08 A004A 1210-1-G VG 95343 T08 A007A 1201-1-G VG 95343 T08 A009A 1206-1-G VG 95343 T08 A010A 1202-1-G VG 95343 T08 A011A 1207-1-G VG 95343 T08 A016A 1204-1-G VG 95343 T08 A017A 1216-1-G VG 95343 T08 B001A 1301-1-G VG 95343 T08 B002A 1303-1-G VG 95343 T08 B003A 1311-1-G VG 95343 T08 B004A 1302-1-G VG 95343 T08 B010A 1306-1-G VG 95343 T08 B011A 1307-1-G VG 95343 T08 C001A 206-1-G VG 95343 T08 C002A 203-1-G VG 95343 T08 C003A 204-1-G VG 95343 T08 C005A 212-1-G VG 95343 T08 D001A 306-1-G VG 95343 T08 D002A 304-1-G VG 95343 T08 D003A 310-1-G VG 95343 T08 D004A 311-1-G VG 95343 T08 E002A 411-1-G VG 95343 T08 E004A 403-1-G VG 95343 T08 E005A 413-1-G VG 95343 T09 A001A 1203-1-GP VG 95343 T09 A002A 1209-1-GP VG 95343 T09 B001A 1301-1-GP VG 95343 T09 B002A 1303-1-GP VG 95343 T09 B003A 1311-1-GP VG 95343 T09 C001A 206-1-GP VG 95343 T09 C002A 203-1-GP VG 95343 T09 C003A 204-1-GP VG 95343 T15 A0001 V9500 hellermanntyton hellermanntyton hellermanntyton

All statements, technical information and recommendations related to the Seller’s products are based on information believed to be reliable, but the accuracy or completeness thereof is not guaranteed. Before utilising the product, the user should determine the suitability of the product for its intended use. The user assumes all risks and liability whatsoever in connection with such use. Any statement or recommendations of the Seller which are not contained in the Seller’s current publications shall have no force or effect unless contained in an agreement signed by an authorised officer of the Seller. The statements contained herein are made in lieu of all warranties, express or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose which warranties are hereby expresslay disclaimed. SeLLeR ShALL nOT Be LIABLe TO The USeR OR Any OTheR PeRSOn UnDeR Any LeGAL TheORy, IncLUDInG BUT nOT LIMITeD TO neGLIGence OR STRIcT LIABILITy, fOR Any InJURy OR fOR Any DIRecT OR cOnSeqUenTIAL DAMAGeS SUSTAIneD OR IncURReD By ReASOn Of The USe Of Any Of The SeLLeRS PRODUcTS ThAT WeRe DefecTIVe.

Plymouth International Medical and Technology Park Plymouth, Devon PL6 5WR England Telephone: +44 (0)1752 761211 Fax: +44 (0)1752 761210 www.hellermanntyton.co.uk U.S. OFFICE

2024 Liverpool Drive

U.S.A. Tel: 001 469 361 6678 Fax: 001 469 361 6671 www.hellermanntyton.co.uk E-mail - cholland@htamericas.com HellermannTyton Cage Code: K0720