15VK-G6-R

15VK MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

MODEL: 15VK 15VK SPECIFICATIONS ES-0621 Rev.1 Page 1/3 http://www.m-system.co.jp/ Dual Channel Input/Output Isolators 15-RACK SIGNAL CONVERTER (fast response) Functions & Features

• Converting a DC input into a standard process signal
• 2 channels available; accomplishing economical and space-saving multi-input processing Typical Applications
• Isolation between control room and field instrumentation MODEL: 15VK–[1]6-R[2]

ORDERING INFORMATION

• Code number: 15VK-[1]6-R[2] Specify a code from below for each [1] and [2]. (e.g. 15VK-46-R/Q)
• Special input range (For code 0)
• Specify the specification for option code /Q (e.g. /C01) [1] INPUT Current A: 4 – 20 mA DC (Input resistance 250 Ω) D: 0 – 20 mA DC (Input resistance 50 Ω) G: 0 – 1 mA DC (Input resistance 1000 Ω) H: 10 – 50 mA DC (Input resistance 100 Ω) Voltage 2: 0 – 100 mV DC (Input resistance 100 kΩ min.) 3: 0 – 1 V DC (Input resistance 1 MΩ min.) 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 0: Specify voltage (See INPUT SPECIFICATIONS) OUTPUT Voltage 6: 1 – 5 V DC (Load resistance 5000 Ω min.) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [2] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating

RELATED PRODUCTS

• EXTENDER CARD (model:10EC) Necessary to adjust span. GENERAL SPECIFICATIONS Construction: Rack-mounted; terminal access via screw terminals at the front and via card-edge connector at the rear; terminal cover provided Connection Input: M3.5 screw terminals (torque 0.8 N·m) Output: Card-edge connector and M3.5 screw terminals (torque 0.8 N·m) Power input: Supplied from card-edge connector Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (black) Isolation: Input to output or power; ch.1 input to ch.2 input Overrange output: Approx. -10 to +120 % Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (top) INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated ■ DC Voltage: 0 – 30 V DC Minimum span: 0.1 V Offset: Max. 1.5 times span Input resistance Span 0.1 – 1 V : ≥ 100 kΩ Span ≥ 1 V : ≥ 1 MΩ

MODEL: 15VK 15VK SPECIFICATIONS ES-0621 Rev.1 Page 2/3 http://www.m-system.co.jp/ OUTPUT SPECIFICATIONS With the input voltage code 3, 4, 5, 6 and current, the output goes below 0 % when the input is open. INSTALLATION Power consumption: Approx. 20 mA Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Standard Rack 15BX Weight: 180 g (0.40 lb) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: ≤ 25 msec. (0 – 90 %) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (input to output or power) 500 V AC @ 1 minute (ch.1 to ch.2 input)

500 V AC @ 1 minute (output to ground)

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 130 (5.12) 3 (.12) 51 (2.01) 82 (3.23) 2–4.3 (.17) dia. MTG HOLE TERMINAL COVER 7–M3.5 SCREW 8 (.31) 91 (3.58) 99 (3.90 ) 25 (.98) 1 2 5 6 7 8

MODEL: 15VK 15VK SPECIFICATIONS ES-0621 Rev.1 Page 3/3 http://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Low Drift Amplifier Output Driver Ch.1 OUTPUT Ch.1 INPUT CONNECTOR SZ Isolation Low Drift Amplifier Output Driver SZ POWER Ch.2 OUTPUT Ch.1 OUTPUT 6 ++ Ch.2 INPUT Ch.2 OUTPUT *Input shunt resistor incorporated for current input. Specifications are subject to change without notice.